Photonics Source provides 136 categories and 7939 products.
-
Fluid Control System
Control Accuracy: High Operating Pressure Range: 0-10bar Operating Temperature Range: -10°C to 80°C Material: Stainless Steel Material: Plastic -
Type MZ15 Manual Calibration and Cleaning Module
Material: ABS Material: Stainless steel Material: Passivated steel Material: Zn Material: CuZn -
Type BBS-3F Inline Sight Glass
Material Wetted: Stainless steel 1.4435/316L Material Non-wetted: Stainless steel 1.4305/303 or equivalent Seal Material: EPDM Seal Material: FEP Glass Material: Borosilicate glass -
Type BBS-11 Standard Ingold Socket
Material Wetted: Stainless steel 1.4435/316L Material Non-wetted: Stainless steel 1.4305/303 or equivalent Membrane: Silicone Seal: EPDM Seal: FEP -
Type BBS-4S Hose Fittings
Material Wetted: Stainless steel 1.4435/316L Material Non-wetted: Stainless steel 1.4305/303 or equivalent Surface Quality: Ra≤0.76μm (ASME BPE SF3) Operating Pressure: Refer to datasheet Type BBS-04 Operating Medium: Gases or liquids -
Fluid Control Systems
Flow Range: 0-1000ml/min Operating Pressure: 0-10bar Operating Temperature: -10°C to 80°C Connection Size: 1/4 inch Material: Stainless Steel -
Type 8110 Vibrating Level Switch
Material: Plastic PEI (Polyetherimide) and stainless steel 316L (1.4404) Surface Quality: Ra<3.2μm (thread)/Ra<0.8μm (clamp) Weight: Approx. 250g Measured quantity: Limit level of liquids Operating Mode: Min/max changeover by electrical connection -
Type 8140 Radar Filling Level Meter
Material: Stainless steel 316L (1.4404), glass (inspection window) Non-wetted parts: Stainless steel 316L (1.4404), EPDM, PA Grounding Terminal and Screw: Stainless steel 316L Cable Gland: PA Blind Plug: PA -
-
Fluid Control Systems
Flow Range: 0-1000L/h Operating Pressure: 0-10bar Operating Temperature: -10°C to 80°C Connection Size: 1/2 inch, 3/4 inch, 1 inch Material: Stainless Steel -
Type 8081 Ultrasonic Flowmeter
Material-Non-wetted parts: Cover: PA, Housing: PPS, Screw: Stainless steel, Fixed connector: Silicone Material-Wetted parts: Fitting body: Brass, Measuring tube: PES, Seal: EPDM Pipe Diameter: DN15...DN25 Measuring range: 0.06...200l/min Measuring Element: 2 ultrasound emitter-receiver cells -
Type 8007 Flowmeter for Gases
Material Seal: NBR, FKM (for oxygen) Material Body: Standard variant: stainless steel 1.4301/304, heavy duty variant: stainless steel 1.4571/316Ti Material Electronics Housing: Standard variant: polycarbonate, heavy duty variant: die-cast aluminium Probe Length: Standard variant: 220mm, other lengths on request Nominal Flow Range: Up to 44,030Nm³/h (air) -
Type TCD001 Pressure Switch
Housing Material: Brass Housing Material: Galvanized steel Housing Material: Stainless steel Diaphragm Material: NBR Diaphragm Material: UR seal -
5120 Model
Dimensions: 20mm Material (in contact with media): PEEK Material (in contact with media): FFKM Material (in contact with media): ETFE Sampling needle: 0.51mm or 0.95mm -
Type ME44 I/O Module
Dimensions: 82.6mm×123mm×21mm Weight: 0.3kg Material: PC (polycarbonate) Status Display: RGB LED according to NAMUR NE107, one status LED per channel Ambient Temperature: -20°C...+60°C -
Type 8762 Electronic Pressure Controller (EPC)
Dimensions: Refer to section 4 Material: FKM or EPDM (depending on fluid) Housing: Pressure-resistant Base: Stainless steel 1.4401/316L Materials in contact with medium: Stainless steel 1.4301/302,1.4113/434,1.4305/303,1.4404/316L -
Flow Sensor
Flow range: 0.03-3 l/min Temperature range: -10°C to +90°C Accuracy: ±2% of measured value Display: Digital OLED Connection Size: G1/4 -
Type TST001 Resistance Thermometer
Dimensions: Refer to dimensions section Protection Tube Material: Stainless steel 1.4571 Circuit Type: 2-wire circuit Connection: External thread G½A Output Signal: 4-20mA (0-150°C)
