Photonics Source provides 136 categories and 7939 products.
-
8228 Type Conductivity Sensor
Measurement Deviation: ±(2%+5μS/cm) Measurement Resolution: 0.1μS/cm Non-linearity Error: ±2% Response Time t90: 3s (no wave) to 40s (wave) Temperature Deviation: ±1°C -
Type 8188 Level Measurement Device
Material: PC transparent, Plastic PBT (Polyester), PPS, Stainless steel 316L Non-wetted parts: Cover: PC transparent; Housing: Plastic PBT (Polyester), PPS, Stainless steel 316L; Grounding terminal and screw: Stainless steel 316L; Seal: EPDM; Cable gland: PA; Blind plug: PA Wetted parts: Seal: NBR with aramid fibers Measuring Range: 0.08...75m (depending on variant) Damping: 0...999.9s, adjustable -
Bourdon Tube Pressure Gauge Type TAU001
Housing: Plastic Housing: black Measuring element (circular): Copper alloy Pointer: Plastic Pointer: black -
Type 8189 Level Measuring Device
Housing Material: Plastic PBT (Polyester) and stainless steel 316L (1.4404) Grounding Terminal and Screw: Stainless steel 316L Seal: Between housing and cover: EPDM Cable Gland: PA Blind Plug: PA -
Type 8318 Pressure Transmitter with IO-Link Interface
Material: Non-wetted parts: Stainless steel 1.4301 (304), Wetted parts: Stainless steel 1.4404 (316L) Measuring Element: Membrane in stainless steel 1.4435 (316L), Welding ring in stainless steel 1.4404 (316L) Weight: Approx. 160g Measurement technology: Metallic thin film strain gauge Measuring Range: -0.4...+0.4bar, -1...+1bar, -1...+2.5bar, -1...+5bar, -1...+12bar -
Type 8312 Pressure Transmitter with CANopen Interface
Housing Material: Stainless steel 1.4305 (303) Process Connection: G 1/4 or NPT 1/4 (ceramic variant), G 3/4 with flush diaphragm, Clamp 1-1/2" (metallic variant) Measuring Element: Ceramic Al2O3 (96%) for ceramic variant, Stainless steel 1.4435 (316L) for metallic variant Seal Material: FPM (FFPM on request) for ceramic variant, None for metallic variant Surface Quality: Ra<0.8μm (clamp connection) -
Type 8418 RTD Temperature Sensor with IO-Link Interface
Material (Non-wetted parts): Housing: stainless steel 1.4404 (316L), 1.4571 (316Ti); Fixed connector: stainless steel 1.4404 (316L), PBT GF 6.5 Material (Wetted parts): Process connection: stainless steel 1.4404 (316L), 1.4435 (316L) with low delta ferrite content; Protection tube: stainless steel 1.4404 (316L), 1.4435 (316L) Weight: Approx. 80g for thread connection and 100mm probe length Measuring Element: RTD temperature probe Pt1000, four-wire circuit Measuring probe length: 50mm or 100mm -
Type 8312 Pressure Transmitter with CANopen Interface
Material: Stainless steel 1.4305 (303) Non-wetted parts: Stainless steel 1.4305 (303) Wetted parts: Ceramic variant: stainless steel 1.4305 (303), Metallic variant: stainless steel 1.4571 (316Ti) Measuring Element: Ceramic Al2O3 (96%), Metallic variant: stainless steel 1.4435 (316L) Seal: Ceramic variant: FPM (FFPM on request), Metallic variant: none -
Type 8412 RTD Temperature Sensor with CANopen Interface
Material: Stainless steel 1.4571 (316Ti) Wetted parts: Stainless steel 1.4571 (316Ti) or 1.4435 (316L) Process Connection: G1/2 or NPT1/2, Clamp 3/4" Protection tube: Stainless steel 1.4571 (316Ti) or 1.4435 (316L) Weight: Approx. 80g -
Type 8412 RTD Temperature Sensor with CANopen Interface
Material: Stainless steel 1.4571 (316Ti) Wetted parts: Stainless steel 1.4571 (316Ti) or 1.4435 (316L) Process Connection: G1/2 or NPT1/2, Clamp 3/4 Protection tube: Stainless steel 1.4571 (316Ti) or 1.4435 (316L) Weight: Approx. 80g -
Type 8735 Multi-channel Mass Flow Controller/Meter
Seal Material: FKM or EPDM (depending on gas) Fluidic Material: PPS, stainless steel 1.4404/316L or others MFM Basic Block Material: Aluminium System Basic Block Material: Aluminium or stainless steel Total Weight: Approximately 750g (3-channel MFC system) -
8763 Pressure Controller
Operating Voltage: 18-35VDC Power Consumption: <6W (typical 24W, <12W for connected heating element) Working Medium: Non-corrosive gases (e.g., nitrogen, air) Operating Temperature: +15°C to +40°C Connection Type: G 1/4 threaded version -
8763 Pressure Controller
Supply Voltage: 18-35VDC Power Consumption: <6W (typical 24W, <12W for continuous operation) Operating Medium: Non-corrosive gases (e.g., nitrogen, air) Operating Temperature: +15°C to +40°C Connection Type: G 1/4 threaded connection -
Type 8316 Pressure Measuring Device
Material: Stainless steel 14404 (316L) Non-wetted parts: Stainless steel 14404 (316L) Wetted parts: Stainless steel 14404 (316L) Process Connection: Thread G1/4 or NPT1/4 Measuring Element: Ceramic Al2O3 (99.6%) for ≤0.6 bar, Ceramic Al2O3 (96%) for >0.6 bar and ≤60 bar, Stainless steel for 100 bar -
Type 8202 pH or ORP Transmitter
Probe Length: 120mm Measuring Range pH: 2...16pH or -580...+580mV Measuring Range ORP: -2000...+2000mV Measuring Range Temperature: -20...+130°C (-4...+266°F) Measurement Deviation pH: ±0.02pH or 0.5mV -
Type 8201 pH Measuring System
Sensor Tube: Enamelled steel tube Process Connection: Stainless steel 1.4404 Electrode Head: PVDF Diaphragm: Ceramic Seal: EPDM -
Type MS01 pH Sensor Cube
Housing Material: PPE+PS Lever Material: Zamak Lever Material: painted Seal Material: EPDM Compatibility: Type 8905 online water analysis system -
Type 8202 pH or ORP Transmitter
Material: PVC, PVDF, stainless steel 1.4571 (316Ti) Pipe Diameter: DN25...DN110 Temperature Sensor: Pt1000 integrated within the holder Temperature Compensation: Automatic, reference temperature 25°C Fluid Temperature: PVC: 0...+50°C, PVDF: 0...+130°C, PP: 0...+80°C, Metal: 0...+130°C -
8619 multiCELL Transmitter/Controller
Operating Voltage: 12-36VDC Maximum Current: 2A Display: LC display, 128x168 resolution Storage Card: 8GB SDHC Digital Input: 0-36VDC, 3kΩ, 0.5-2500Hz
