Selected
- Germany
Current Category:
Subcategory:
- 3D Scanner(4)
- Beam Profilers(6)
- Conventional Microscopes(17)
- Displacement Gages(30)
- Sensors(230)
- Fiber Inspection Tools(31)
- Fiber Test & Measurement(120)
- Gas Analysis(48)
- Interferometers(12)
- Laser Scanning and Ranging(4)
- LiDAR(41)
- Material Analysis and Forensics(13)
- Measurement Devices(17)
- Metrology Accessories(43)
- Microscope Accessories(19)
- Microscopes(36)
- Optical Cells(1)
- Optical Inspection(23)
- Optical Metrology(48)
- Optical Power Meters(42)
- Optical Spectrum Analyzers(18)
- Optical Surface Profiler(15)
- Optical Wavelength Meters(7)
- Scanners and Rangefinders(5)
- Size Measurement(18)
- Spectrometers(27)
- Terahertz(11)
- Thermal Solutions(24)
- Waveform Generators and Analyzers(5)
- Other(639)
- Probe Station(49)
- Probe Station Accessories(125)
Country:
More
Photonics Source provides 62 products. Download datasheets, request quotes, and compare function, price, and availability.
-
TruFiber Series
Laser Power TruFiber S 1000 S: 1000 Laser Power TruFiber S 2000 S: 2000 Laser Power TruFiber S 3000 S: 3000 Laser Power TruFiber S 4000 S: 4000 Laser Power TruFiber S 5000 S: 5000 -
TruFiber Series
Laser Power TruFiber S: 1000-50000W Typical Power Stability TruFiber S: ±1% Adjustable Power Range TruFiber S: 2-100% Typical Beam Quality TruFiber S: 2-6mm-mrad Available LLK Diameter TruFiber S: ≥50-≥150μm -
Type 8203 pH and ORP Probes
Measuring Range (mV): -2000...+2000 Fluid Temperature (°C): -10...+140 Fluid Minimum Conductivity (µS/cm): 2 Maximum Pressure at Max. Temperature (bar): 10 Electrical Connection: S7/S8 connector, Variopin 6.0 -
Type 8110 Vibrating Level Switch
Material: Plastic PEI (Polyetherimide) and stainless steel 316L (1.4404) Surface Quality: Ra<3.2μm (thread)/Ra<0.8μm (clamp) Weight: Approx. 250g Measured quantity: Limit level of liquids Operating Mode: Min/max changeover by electrical connection -
Type 8140 Radar Filling Level Meter
Material: Stainless steel 316L (1.4404), glass (inspection window) Non-wetted parts: Stainless steel 316L (1.4404), EPDM, PA Grounding Terminal and Screw: Stainless steel 316L Cable Gland: PA Blind Plug: PA -
Type 8081 Ultrasonic Flowmeter
Material-Non-wetted parts: Cover: PA, Housing: PPS, Screw: Stainless steel, Fixed connector: Silicone Material-Wetted parts: Fitting body: Brass, Measuring tube: PES, Seal: EPDM Pipe Diameter: DN15...DN25 Measuring range: 0.06...200l/min Measuring Element: 2 ultrasound emitter-receiver cells -
Type 8007 Flowmeter for Gases
Material Seal: NBR, FKM (for oxygen) Material Body: Standard variant: stainless steel 1.4301/304, heavy duty variant: stainless steel 1.4571/316Ti Material Electronics Housing: Standard variant: polycarbonate, heavy duty variant: die-cast aluminium Probe Length: Standard variant: 220mm, other lengths on request Nominal Flow Range: Up to 44,030Nm³/h (air) -
Type TCD001 Pressure Switch
Housing Material: Brass Housing Material: Galvanized steel Housing Material: Stainless steel Diaphragm Material: NBR Diaphragm Material: UR seal -
5120 Model
Dimensions: 20mm Material (in contact with media): PEEK Material (in contact with media): FFKM Material (in contact with media): ETFE Sampling needle: 0.51mm or 0.95mm -
Type ME44 I/O Module
Dimensions: 82.6mm×123mm×21mm Weight: 0.3kg Material: PC (polycarbonate) Status Display: RGB LED according to NAMUR NE107, one status LED per channel Ambient Temperature: -20°C...+60°C -
Type 8762 Electronic Pressure Controller (EPC)
Dimensions: Refer to section 4 Material: FKM or EPDM (depending on fluid) Housing: Pressure-resistant Base: Stainless steel 1.4401/316L Materials in contact with medium: Stainless steel 1.4301/302,1.4113/434,1.4305/303,1.4404/316L -
Flow Sensor
Flow range: 0.03-3 l/min Temperature range: -10°C to +90°C Accuracy: ±2% of measured value Display: Digital OLED Connection Size: G1/4 -
Type TST001 Resistance Thermometer
Dimensions: Refer to dimensions section Protection Tube Material: Stainless steel 1.4571 Circuit Type: 2-wire circuit Connection: External thread G½A Output Signal: 4-20mA (0-150°C) -
8762型Email 压力控制器 (EPC)
Dimensions: Refer to section 4 Material: FKM or EPDM (depending on fluid) Pressure Rating: 0.4bar abs Flow range: <200l/min Control Accuracy: ±0.25% -
Type 8762 Electronic Pressure Controller (EPC)
Dimensions: Refer to section 4 Material: FKM or EPDM, stainless steel 1.4401/316L Weight: Approx. 500g Pressure Range: 0.4bar abs Flow Range (Q): <200l/min -
Type 8131 Radar Filling Level Meter
Material: PBT (polyester), PVDF Non-wetted parts: Cover: PBT (polyester), Housing: PBT (polyester), Seal: Silicone O-ring, Cable gland seal: EPDM Wetted parts: Process connection: PVDF, Antenna: PVDF, Seal: FKM or EPDM depending on variant Display: LCD with graphical support Weight: Approx. 0.7kg -
8750 Gas Flow Controller
Dimensions: DN15-DN100 Material: Stainless steel Material: PTFE Nominal Pressure: PN25 (DIN EN 1333), Class 150 (DIN EN 1759) Control Valve Pressure Range: 0-16bar -
8221 Type Conductivity Sensor
Measuring Range (μS/cm) 四电极电导率探头1: 0.1-500 Measuring Range (μS/cm) 四电极电导率探头2: 1-300 Measuring Range (μS/cm) 四电极电导率探头3: 1-20 Measuring Range (μS/cm) 双电极电导率探头1: 0.05-20 Measuring Range (μS/cm) 双电极电导率探头2: 1-200
