ps Optical fiber Laser
The picosecond fiber laser uses high-performance rare-earth fiber, precise dispersion compensation and an active servo system to provide stable picosecond pulses in the 1560nm band. One-button self-starting, long-term stable maintenance-free operation, ultrashort pulses and high peak power support optical frequency combs, supercontinuum generation and terahertz (THz) applications. Wavelength, pulse width, power and repetition rate can be specified or customized.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Wavelength [Customizable] | typical:1540~1560 nm |
| Spectral Width | typical:0.5~50 nm |
| Pulse Width [Customizable] | typical:1/10/50/100 |
| Output Power [Customizable] | typical:1~100 mW |
| Power instability | typical:< ±1% |
| Repetition Rate [*Optional repetition-rate adjustment] | typical:10~1000 MHz |
| Repetition frequency instability [@1hour] | typical:<100 Hz |
| Single-pulse energy | typical:0.1~1 nJ |
| Polarization state | Linear polarization |
| Fiber and connector [Slow axis Alignment] | PM1550，FC/APC |
| Warm-up time | typical:< 0.5 min |
| Control Method [Benchtop] | Touchscreen / RS232 serial communication |
| Control Method [Module] | Buttons / RS232 or USB communication |
| Synchronous electrical signal interface [Benchtop] | SMA |
| Synchronous electrical signal interface [Module] | SMA |
| Power supply [Benchtop] | AC 100~240V , 30W |
| Power supply [Module] | DC12V, <20W |
| Dimensions [Benchtop] | B2: 255(W)×322(D)×115(H) mm |
| Operating Temperature | 5 ~ 35°C |
| Operating Humidity | 0~70% |
Applications
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
100W Subnanosecond Infrared Laser
Laser Modules & Systems
Guoshunlaser
M² Beam quality: ＜1.6 Average Output Power: ＞100 Power adjustment Range: 0~100 %
-
100W Picosecond Green Fiber Laser
Laser Modules & Systems
Guoshunlaser
M² Beam quality: ＜1.3 Average Output Power: ＞100 Power adjustment Range: 0~100 %
-
100W Nanosecond Infrared Fiber Laser
Laser Modules & Systems
Guoshunlaser
M² Beam quality: ＜1.4 Average Output Power: ＞100 Power adjustment Range: 0~100 %
-
100W Femtosecond Infrared Laser
Laser Modules & Systems
Guoshunlaser
M² Beam quality: ＜1.3 Average Output Power: ＞100 Power adjustment Range: 0~100 %
-
10W Compact Picosecond Infrared Laser
Laser Modules & Systems
Guoshunlaser
M² Beam quality: ＜1.2 Average Output Power: ＞10 Power adjustment Range: 0~100 %
Related Articles
As a core precision optical component for wavelength screening, frequency locking and spectral demodulation, optical etalons are widely used in high-end scientific research and precision laser equipment.
As a vital emerging sector of modern three-dimensional spatial economy, the low-altitude economy has become a new global growth driver. It covers a wide range of commercial scenarios, including UAV navigation and obstacle avoidance, precise airspace management, aerial mapping, low-altitude logistics distribution, security monitoring and emergency disaster rescue. Nevertheless, frequent extreme weather, complex terrain obstacles and increasingly dense low-altitude flight activities pose severe challenges to the safety and stability of low-altitude aircraft operations.
Laser pump sources are the core energy input component of solid-state lasers and laser amplifiers, and their performance directly determines the output power, beam quality and service life of the entire laser system. In scenarios such as industrial processing, scientific research experiments and high-end equipment, improper pump source selection will not only result in substandard system performance, but also bring a series of problems such as rapid device degradation and high operation and maintenance costs. This article sorts out the core selection logic and key pitfalls of pump source procurement, and provides selection references based on mature, mass-produced high-reliability products to help purchasers efficiently screen suitable products.
Shandong Haucore Optoelectronics Co., Ltd. introduces the HGLD‑792‑COS‑D‑10WB semiconductor laser within its COS series. Delivering an output power of 10 W at a central wavelength of 792 nm, this device adopts gold‑tin bonding COS packaging. Featuring high reliability and long service life, it serves as a preferred pump source for solid‑state lasers and is widely deployed in industrial processing, laser display, medical & aesthetic treatment, scientific research and other fields.
Loading...
Name
Phone
Organization
Use Case
Database Platform