LETO HS532 Green Laser LETOHS532-50mW
The LETOHS532 green laser provides 532nm single-longitudinal-mode output with stable power options of 50mW/100mW, excellent beam quality and ultra-low noise. It is widely suitable for Raman spectroscopy, DNA sequencing and other fields.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Wavelength | 532nm |
| Operating method | CW |
| Output Power | 50mW |
| Spatial Mode | TEM₀₀ |
| Power stability [rms, over 24 hours] | <±1% |
| Coherence Length | >100m |
| Beam quality M² | <1.05 |
| Spectral Line Bandwidth | < 3MHz |
| Spot diameter | <1.0 mm( Typical 0.8 mm) |
| Beam Divergence Angle ( Full Angle ) | < 1.0 mrad |
| Spot roundness | >95% |
| Beam Pointing Stability [3 hours ，25+2°C] | <10 μrad |
| Mean-Square Noise Value [0 Hz to 20 Mhz] | < 0.1% rms |
| Linear polarization ratio [45°] | > 100:1 |
| Warm-Up Time | <10 minutes |
| Service life | >20,000 Hours |
| Voltage Input | 95-250VAC,5VDC |
| Total power consumption | < 40W |
| Dimensions | 100 mm × 50.8 mm × 35.5 mm |
| Operating temperature | 10℃~35℃℃ |
| Storage temperature | -20°C~+70°C |
Datasheet
Supplier Information
Related Products
-
100W Subnanosecond Infrared Laser
Laser Modules & Systems
Guoshunlaser
M² Beam quality: ＜1.6 Average Output Power: ＞100 Power adjustment Range: 0~100 %
-
100W Picosecond Green Fiber Laser
Laser Modules & Systems
Guoshunlaser
M² Beam quality: ＜1.3 Average Output Power: ＞100 Power adjustment Range: 0~100 %
-
100W Nanosecond Infrared Fiber Laser
Laser Modules & Systems
Guoshunlaser
M² Beam quality: ＜1.4 Average Output Power: ＞100 Power adjustment Range: 0~100 %
-
100W Femtosecond Infrared Laser
Laser Modules & Systems
Guoshunlaser
M² Beam quality: ＜1.3 Average Output Power: ＞100 Power adjustment Range: 0~100 %
-
10W Compact Picosecond Infrared Laser
Laser Modules & Systems
Guoshunlaser
M² Beam quality: ＜1.2 Average Output Power: ＞10 Power adjustment Range: 0~100 %
Related Articles
As a core precision optical component for wavelength screening, frequency locking and spectral demodulation, optical etalons are widely used in high-end scientific research and precision laser equipment.
As a vital emerging sector of modern three-dimensional spatial economy, the low-altitude economy has become a new global growth driver. It covers a wide range of commercial scenarios, including UAV navigation and obstacle avoidance, precise airspace management, aerial mapping, low-altitude logistics distribution, security monitoring and emergency disaster rescue. Nevertheless, frequent extreme weather, complex terrain obstacles and increasingly dense low-altitude flight activities pose severe challenges to the safety and stability of low-altitude aircraft operations.
Laser pump sources are the core energy input component of solid-state lasers and laser amplifiers, and their performance directly determines the output power, beam quality and service life of the entire laser system. In scenarios such as industrial processing, scientific research experiments and high-end equipment, improper pump source selection will not only result in substandard system performance, but also bring a series of problems such as rapid device degradation and high operation and maintenance costs. This article sorts out the core selection logic and key pitfalls of pump source procurement, and provides selection references based on mature, mass-produced high-reliability products to help purchasers efficiently screen suitable products.
Shandong Haucore Optoelectronics Co., Ltd. introduces the HGLD‑792‑COS‑D‑10WB semiconductor laser within its COS series. Delivering an output power of 10 W at a central wavelength of 792 nm, this device adopts gold‑tin bonding COS packaging. Featuring high reliability and long service life, it serves as a preferred pump source for solid‑state lasers and is widely deployed in industrial processing, laser display, medical & aesthetic treatment, scientific research and other fields.
Loading...
Name
Phone
Organization
Use Case
Database Platform