F1000
V1-B200/F1000 is a compact 200W blue + 1000W fiber composite laser welding module for welding copper, gold, stainless steel and other highly reflective and dissimilar materials. The spot can be customized, with stable power output, achieving low-spatter welds with smooth surfaces. Product features: blue laser output power: 200W; power adjustment range: 10%-100%; focused spot size: 0.4 mm; compatible fiber laser power: up to 1000W; welding head weight: ≤4 kg; power supply weight: ≤8 kg; input voltage: ~220V/50Hz, power consumption <700W; operating temperature: 10-40 ℃; cooling requirements: ≥5 L/min water flow, rated cooling capacity 1000W
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Blue Laser Parameter 1 - Blue Laser Output Power | 200W |
| Blue Laser Parameter 1 - Power Adjustment Range | 10%~100% |
| Blue Laser Parameter 1 - Focused Spot Size | 0.4mm |
| Blue Laser Parameter 1 - Cable Length from Laser to Power Supply | 3m |
| Blue Laser Parameter 1 - Input Voltage Vop | ~220V/50Hz |
| Blue Laser Parameter 1 - Rated Power Consumption | ＜700W |
| Maximum Tolerable Blue Laser Power | 200W |
| Maximum Tolerable Fiber Laser Power | 1000W |
| Working Distance (Copper Nozzle to Workpiece Surface) | 5±5mm adjustable |
| Number of Protective Windows | 2 |
| Coaxial Gas Nozzle | Yes |
| Rated Heat Dissipation Capacity | 1000 (chiller selection should be determined by the power consumption of the fiber laser)W |
| Cooling Water Flow Rate | ≥5L/min |
| Weight - Laser Welding Head Weight | ≤4kg |
| Weight - Power Supply Weight | ≤8kg |
| Remarks | All parameter tests are conducted at 25°C. |
Applications
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
10G DFB Distributed Feedback Laser
Laser Modules & Systems
Hchiptech
Working temperature: -40–85 °C Output Power: Min 6.9 mW，typical 9 mW（T=25°C，Ith+30mA）
-
A word
Laser Modules & Systems
Gan-semi
-
1550 nm PZT narrow-line wide laser
Laser Modules & Systems
Ovlink
Central wavelength: 1550.12nm Lorenz's wide: ≤300Hz (customable) Size: ≤1KHz (customable)
PZT FM ultra narrow-wire lasers are external cavity feedback using high Q quality factors; ultra low phase noise is achieved by self-injecting locking; and ultra narrow line wide laser output; encapsulation sizes are small; power consumption is lower; environmental disturbance resistance is better; it is widely applied to fibre-optic sensors; dry communications; compact laser radar; quantum technology, etc. Very narrow line width; very low to 1Hz resistant to environmental interference Very low long-term frequency drift Low phase intensity (RIN) noise Stabilization of single-frequency work Non-jumping Small size low power PZT band bandwidth up to 100 kHz wavelengths (1 μm, C-band; L-band)
-
1550 nm high power mono-frequency continuous fibre-optic laser
Laser Modules & Systems
Ovlink
Central wavelength: typ: 1550 2nm Width: typ: ≤ 300kHz
The laser uses the MOPA technology system; takes full advantage of the technological advantages of fibre-optic laser noise suppression and pre-magnification; obtains a high power output while maintaining the maximum beam mass, the high oscillation distillation ratio, the high optical noise ratio; and is the ideal light source for successive Doppler laser wind radars. Typical applications are on-board wind radars, short-range dry wind radars. Nationally manufactured equipment Human eye safety wavelength 1550 nm single frequency, single luminum, full fibre-optic structure 100kHz volume laser width wide working temperature range
-
905 nm 50 W FP Fabry–Pérot Laser
Laser Modules & Systems
Hchiptech
Peak Output Power: 50 W Emission Wavelength: 895–915 nm, typical 905 nm
Related Articles
Precise spectral screening is essential for high-precision medical detection, spectroscopic analysis and intelligent imaging systems. Tailored for visible and near-infrared spectral separation, the SP900 shortpass optical filter delivers high-efficiency light transmission and deep infrared blocking performance. It effectively eliminates stray light interference, improves signal-to-noise ratio (SNR), and serves as a core optical component for biomedical instruments, scientific analysis equipment and machine vision systems.
As a professional ultraviolet‑laser solution provider, Precilasers has launched its 266 nm narrow‑linewidth industrial laser, delivering reliable single‑frequency output for high‑precision interference lithography, semiconductor inspection and precision metrology applications.
Founded in November 2017, TIANJIN H‑CHIP TECHNOLOGY GROUP CORPORATION is a professional manufacturing‑service provider dedicated to micro‑nano optoelectronic chips. It holds multiple prestigious qualifications, including National High‑Tech Enterprise, one of Tianjin’s first Gazelle‑certified Enterprises, Specialized‑Refined‑Differentiated‑Innovative SME, and Leading Enterprise for Strategic Emerging Industries.
Recently, the key laboratory of Functional Crystal Materials of Tianjin University has published a cutting-edge research paper titled Enhanced Second-Harmonic Generation in Quadratically Nonlinear Weyl Semimetal NbAs for Broadband Photodetection Applications on Advanced Science, a top-tier international academic journal.
Loading...
Name
Phone
Organization
Use Case
Database Platform