Quartz Glass ZS-1
Product description. JGS1 silica plates/sheets. ZS-1 far-UV optical silica glass corresponds to JGS1. High-purity oxyhydrogen fusion produces high OH content (2000ppm) and excellent UV transmission, particularly short-wave UV, exceeding all other glasses. Transmission reaches 90% at 185μm. Synthetic silica has a strong 2730nm absorption peak and no granular structure, making it excellent over 185-2500mμ. Transmission spectrum at 1.0mm thickness. JGS2 silica plates/sheets. ZS-2 UV optical silica corresponds to JGS2. Quartz raw material and oxyhydrogen flames produce glass with tens of ppm metallic impurities, a 2730nm absorption peak, OH content 100-200ppm, striae, and granular structure. It transmits well over 220-2500μm. Silica-sheet properties: special industrial glass made from silicon dioxide, an excellent basic material. 1. Heat resistance: softening point approximately 1730℃; continuous use at 1100℃ and short-term up to 1450℃. 2. Corrosion resistance: almost no reaction with acids except hydrofluoric acid. Acid resistance is 30 times ceramic and 150 times stainless steel; high-temperature stability is described as unmatched by other engineering materials. 3. Thermal stability: extremely low expansion withstands rapid changes; glass heated to around 1100℃ does not crack in room-temperature water. 4. Transmission: good UV-to-IR transmission, visible >93%, UV maximum above 80. 5. Electrical insulation: resistance is ten thousand times ordinary glass, providing excellent insulation and good electrical properties even at room temperature. Chemical composition. Transmission spectrum at 1.0mm thickness. JGS3 silica sheets. HS infrared optical silica corresponds to JGS3. Vacuum electric fusion of quartz produces tens of ppm metal impurities, small bubbles, granular structure, and striae, virtually no OH, and IR transmission above 85%. Application range: 260-3500μm. Transmission spectrum at 1.0mm thickness.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Material | Quartz Glass JGS1, JGS2 and JGS3 Transmits Far-UV, Visible and Near-Infrared Light. Very Low Thermal Expansion, Good Chemical Stability, Uniform Bubbles and Striae, with Spectral Curves from 200 nm to 2500 nm. |
| Number of Surfaces | 0/0，40/2080/50 |
| Surface Accuracy | 1/10 into，1/4 into2 into |
| Thickness | ±0.01mm±0.02mm |
| Centration Error | 5Arc second1Arc Minute |
| Processing Range | Minimum Thickness Down to 0.2mm |
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
Sapphire A-R-M Special Crystal-Orientation Substrate
Optical Material
Jmwafer
A-M-R Orientation Single-Crystal Sapphire Substrate (2~6 Inches) - Material Composition: >99.99%，High Purity， Mono-crystalline Al2O3 (KY) Sapphire A/M/R-Plane Single-Crystal Substrate (2~6 Inches) - End-Face Crystal Orientation [Diameter: 50.8mm]: A-plane (11-20) ± 0.1° Sapphire A/M/R-Plane Single-Crystal Substrate (2~6 Inches) - End-Face Crystal Orientation [Diameter: 100mm]: A-plane (11-20) ± 0.1°
α-Al2O3 Hexagonal Lattice,Chemically Stable/Water-Insoluble/Strong Acid-Alkali Resistant,Mohs9,Melts2050℃/Boils3500℃,Operating up to1900℃,Good Transmission/Thermal Conduction/Insulation/Mechanics,Wear/Scratch Resistance.
-
N-Type Silicon Carbide Epitaxy
Optical Material
Jmwafer
N-Type Silicon Carbide Epitaxial Substrate (2~8 Inches) - Substrate Diameter: 2 inch - 50.8mm N-Type Silicon Carbide Epitaxial Substrate (2~8 Inches) - Substrate Diameter: 4 inch - 100mm N-Type Silicon Carbide Epitaxial Substrate (2~8 Inches) - Substrate Diameter: 6 inch - 150mm
N-Type SiC Epitaxy Grows N-Doped Layer on SiC,High Electron Mobility/Thermal Conductivity/Breakdown Field.
-
Silicon-Based GaN Epitaxial Template
Optical Material
Jmwafer
Silicon-Based GaN Epitaxial Template Substrate (2~8 Inches) - Substrate Diameter: 50.8mm Silicon-Based GaN Epitaxial Template Substrate (2~8 Inches) - Substrate Diameter: 100mm Silicon-Based GaN Epitaxial Template Substrate (2~8 Inches) - Substrate Diameter: 150mm
GaN-on-Si Epitaxy Grows GaN Films on Silicon,Combining GaN Performance with Low-Cost Silicon.
-
High-Borosilicate Glass BF33
Optical Material
Jmwafer
High-Borosilicate Glass - Material: BF33 High-Borosilicate Glass - Diameter: 50.8mm High-Borosilicate Glass - Diameter: 100mm
BF33 Special Borosilicate Glass with Low Expansion,Heat Resistance,Chemical Stability and Excellent Transmission.
-
Sapphire-Based GaN Epitaxial Template
Optical Material
Jmwafer
Sapphire-Based GaN Epitaxial Template Substrate (2~8 Inches) - Substrate Diameter: 50.8mm Sapphire-Based GaN Epitaxial Template Substrate (2~8 Inches) - Substrate Diameter: 100mm Sapphire-Based GaN Epitaxial Template Substrate (2~8 Inches) - Substrate Diameter: 150mm
GaN-on-Sapphire Epitaxial Template Grows GaN Film on Al₂O₃,Common Substrate for Heat/Chemical Stability/Cost Advantages.
Related Articles
Raybowlaser, a professional manufacturer of high-power laser chips, has officially launched its upgraded new-generation 1470nm high-performance laser chip. Achieving groundbreaking progress in rated output power and wall-plug efficiency (WPE), this innovative laser chip delivers superior and reliable core light source solutions for medical cosmetology, industrial processing, agricultural applications and scientific research equipment.
Electro-optic deflectors (EODs) are optical devices used to steer or deflect light beams by applying an electric field to a specialized optical crystal. Unlike mechanical beam steering systems that rely on moving mirrors, electro-optic deflectors enable high-speed, non-mechanical beam control with exceptional precision and responsiveness. They are widely used in laser scanning, optical communications, microscopy, laser printing, spectroscopy, and scientific research, where rapid and accurate laser beam positioning is essential.
Founded in 2004, Wuhan Union Optic Inc. is a National Specialized, Refined, Unique & Innovative "Little Giant" high-tech enterprise located in Wuhan East Lake High-Tech Development Zone.
Precise spectral screening is essential for high-precision medical detection, spectroscopic analysis and intelligent imaging systems. Tailored for visible and near-infrared spectral separation, the SP900 shortpass optical filter delivers high-efficiency light transmission and deep infrared blocking performance. It effectively eliminates stray light interference, improves signal-to-noise ratio (SNR), and serves as a core optical component for biomedical instruments, scientific analysis equipment and machine vision systems.
Loading...
Name
Phone
Organization
Use Case
Database Platform