405nm Laser System —V24M
Save to Favorites
Specifications
| Parameter | Value |
|---|---|
| Output Power [20℃] | Typical:24 W |
| Center wavelength [20℃] | Typical:400-405 nm |
| Spectral Width (90% Energy) [20℃] | Typical:<6.0 nm |
| Fiber core diameter [20℃] | Typical:400 μm |
| Fiber length [20℃] | Typical:2 m |
| Fiber connector [20℃] | Typical:SMA905-SMA905 |
| Control Interface [20℃] | Typical:D-sub-15 |
| Control Mode [20℃] | Typical value: analog voltage and RS232/RS485 |
| Power adjustment Range [20℃] | Typical:0-24W |
| Protective Closed-Loop Feedback [20℃] | Typical value: overvoltage/overcurrent/overtemperature protection |
| Power supply - Voltage [20℃] | Typical:DC24 |
| Power Supply - Current [20℃] | Typical:5.0 A |
| Power Supply - Electrical Power [20℃] | Typical:120 W |
| Water Cooling-Cooling Capacity Requirement [20℃] | Typical:120 W |
| Water Cooling - Min Water Flow Rate [20℃] | Typical:2.0 L/min |
| Water Cooling-Inlet Pressure [20℃] | Typical:0.3 MPa |
| Water Cooling - Operating temperature [20℃] | Typical:20-25 ℃ |
| Water Cooling-Water-Quality Requirements [20℃] | Typical value: purified water / deionized water / distilled water |
Applications
Key Features
Datasheet
Supplier Information
Related Products
-
100W Subnanosecond Infrared Laser
Laser Modules & Systems
Guoshunlaser
M² Beam quality: ＜1.6 Average Output Power: ＞100 Power adjustment Range: 0~100 %
-
100W Picosecond Green Fiber Laser
Laser Modules & Systems
Guoshunlaser
M² Beam quality: ＜1.3 Average Output Power: ＞100 Power adjustment Range: 0~100 %
-
100W Nanosecond Infrared Fiber Laser
Laser Modules & Systems
Guoshunlaser
M² Beam quality: ＜1.4 Average Output Power: ＞100 Power adjustment Range: 0~100 %
-
100W Femtosecond Infrared Laser
Laser Modules & Systems
Guoshunlaser
M² Beam quality: ＜1.3 Average Output Power: ＞100 Power adjustment Range: 0~100 %
-
10W Compact Picosecond Infrared Laser
Laser Modules & Systems
Guoshunlaser
M² Beam quality: ＜1.2 Average Output Power: ＞10 Power adjustment Range: 0~100 %
Related Articles
In photonics and laser technology, devices that manipulate optical signals via the electro-optic effect form the backbone of precision optical systems. Electro-optic phase modulators and electro-optic deflectors are two prominent examples of this device category. As a critical hardware solution for high-speed, high-accuracy laser beam direction control, electro-optic deflectors are widely deployed across industrial and research settings. Below is a detailed overview of their core structure, key performance drivers, and primary use cases.
As a top‑tier supplier of tunable laser chips, Shandong Zhongxin Optoelectronics Technology Company has newly launched the world’s first budget‑friendly fiber‑Bragg‑grating (FBG) demodulator and scanning module.
A laser bar is an array semiconductor laser chip integrated with dozens of emitters, which realizes hundred-watt quasi-continuous output on a single chip. With regular emitter arrangement and controllable fill factor, integrated thermal design and superior wall-plug efficiency compared to single chips, it acts as the core light source for high-power pumping, medical lasers and precision processing.
BEIJING JIEPU TREND supplies YAG+Er:YAG+YAG bonded composite slab laser crystals for high‑power solid‑state laser systems. The monolithic slab consists of two undoped YAG end‑cap layers and a central Er‑doped YAG gain segment. The overall dimension is 9 mm×9 mm×9 mm.
Loading...
Name
Phone
Organization
Use Case
Database Platform