Polarization Maintaining lsolator & WDM Hybrid
The 1550 nm Polarization Maintaining lsolator WDM Hybrid is ideal for filber amplifier application to combinesignal and pump wavelengths with very stable 1550 nm signal isolation.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Signal Channel-Center Wavelength, λc | 1550 nm |
| Signal Channel-Operating Wavelength Range | ±15 nm |
| Signal Channel-Max. Insertion Loss, λc ± 15 nm, 23 °C [Signal Channel；Stage=Single；λc ± 15 nm；23 °C；IL is 0.3 dB higher, RL is 5 dB lower, and ER is 2 dB lower for each connector added. Connector key is aligned to slow axis.] | 0.9 dB |
| Signal Channel-Max. Insertion Loss, λc ± 15 nm, 23 °C [Signal Channel；Stage=Dual；λc ± 15 nm；23 °C；IL is 0.3 dB higher, RL is 5 dB lower, and ER is 2 dB lower for each connector added. Connector key is aligned to slow axis.] | 1.0 dB |
| Signal Channel-Typ. Peak Isolation [Signal Channel；Stage=Single] | 40 dB |
| Signal Channel-Typ. Peak Isolation [Signal Channel；Stage=Dual] | 52 dB |
| Signal Channel-Min. Isolation, λc ± 15 nm, 23 °C [Signal Channel；Stage=Single；λc ± 15 nm；23 °C] | 28 dB |
| Signal Channel-Min. Isolation, λc ± 15 nm, 23 °C [Signal Channel；Stage=Dual；λc ± 15 nm；23 °C] | 45 dB |
| Signal Channel-Min. Channel Isolation (Com to Pass @ Ref Wavelength) [Signal Channel；Com to Pass @ Ref Wavelength] | 30 dB |
| Signal Channel-Min. Extinction Ratio at 23°C [Signal Channel；23°C；IL is 0.3 dB higher, RL is 5 dB lower, and ER is 2 dB lower for each connector added. Connector key is aligned to slow axis.] | 20 dB |
| Reflection Channel-Center Wavelength, λc | 960 to 990 nm |
| Reflection Channel-Max. Insertion Loss, 23 °C [Reflection Channel；23 °C；IL is 0.3 dB higher, RL is 5 dB lower, and ER is 2 dB lower for each connector added. Connector key is aligned to slow axis.] | 0.6 dB |
| Reflection Channel-Min. Channel Isolation (Com to Ref @ Pass Wavelength) [Reflection Channel；Com to Ref @ Pass Wavelength] | 15 dB |
| Reflection Channel-Min. Extinction Ratio at 23°C [Reflection Channel；23°C；IL is 0.3 dB higher, RL is 5 dB lower, and ER is 2 dB lower for each connector added. Connector key is aligned to slow axis.] | 18 dB |
| Min. Return Loss [Reflection Channel Parameters；IL is 0.3 dB higher, RL is 5 dB lower, and ER is 2 dB lower for each connector added. Connector key is aligned to slow axis.] | 50 dB |
| Max. Optical Power (CW) [Reflection Channel Parameters；CW] | 300 mW |
| Max. Tensile Load [Reflection Channel Parameters] | 5 N |
| Fiber Type for Pass Port | Corning PM1550 Panda fiber |
| Fiber Type for Reflection Port | HI 1060 or PM 980 Panda Fiber for Reflect Port |
| Operating Temperature [Reflection Channel Parameters] | -5 to +70 °C |
| Storage Temperature [Reflection Channel Parameters] | -40 to +85 °C |
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
10G SFP LR CWDM(10Km) OSFP-10CWDM10
Wavelength-Division Multiplexing (WDM)
O-send
Emission wavelength [CW]: DM Specification: 10Km
This enhanced small-form-factor pluggable (SFP) fiber transceiver includes digital diagnostic monitoring (DDM). It complies with Ethernet standards and is ideal for 10Gbps data communications. DDM alarms and warnings are integrated through an I2C serial interface under the SFF-8472 multisource agreement (MSA), version 10.4. The transceiver supports data rates from 155Mbps to 1.25Gbps and provides a solution for 1310nm transmission over up to 20 kilometers of single-mode fiber. Subwatt consumption and excellent EMI performance support high port density. It is RoHS compliant and designed and tested to industry safety standards, and is a Class I laser product under US FDA/CDRH and international IEC-60825 standards. The SFP LR connects to a standard 20-contact SFP connector for hot swapping, allowing configuration changes or maintenance by replacing the transceiver without switching off the host. Transmitter and receiver DATA interfaces are internally AC-coupled. An LV-TTL transmitter-disable input and loss-of-signal (LOS) output are also provided. A bail latch permits easy module removal and complies with the SFP MSA. A single +3.3V supply powers operation at case temperatures of 0°C to +70°C commercially or -40°C to +85°C industrially. The metal case protects against electromagnetic interference.
-
1310Tx and 1550Rx WDM BOSA Kit OW-X-X-X-X-XX-X
Wavelength-Division Multiplexing (WDM)
O-send
Absolute Maximum Ratings - Storage Temperature: -40°C~+100°C Absolute Maximum Ratings - Operating temperature: -25°C~+85°C Absolute Maximum Ratings-Lead Solder Temperature: 260°C
The 1310Tx and 1550Rx WDM BOSA kit is mainly used for bidirectional transmission. It includes WDM, a DFB laser and a 2.5Ghz InGaAs detector, with low threshold current and high output power.
-
1310/1490/1550nm FWDM Module OF-X-X-X-X
Wavelength-Division Multiplexing (WDM)
O-send
Pass Wavelength: 1550±10nm Reflection wavelength: 1310±50/1490±10nm Insertion loss: Reflection ≤0.6dB, Transmission ≤0.6dB
The 1310/1490/1550nm FWDM module is mainly used in FTTH optical receivers and CATV WDM systems.
-
2CH CWDM 1610T-1550R OCWDM-M-X-X-X-X-X-X-X
Wavelength-Division Multiplexing (WDM)
O-send
Absolute Parameters-Storage Temperature: -40~+85°C Absolute Parameters-Operating Temperature: -20~+70°C Absolute Parameters-Storage Relative Humidity: 95%
CWDM for FTTX CATV and related applications, RoHs-certified, with customization.
-
3CH FWDM Module
Wavelength-Division Multiplexing (WDM)
O-send
Operating wavelength Range: 1260~1620nm Center wavelength: 1310&1490 1550 1610nm Passband@0.5dB [0.5dB；@0.5dB]: 1310±50. 1490/1550/1625±6.5nm
Related Articles
icrolight is a high-tech enterprise specializing in the R&D, manufacturing and sales of active and passive photonic devices for microwave photonics, LiDAR ranging, gas sensing, fiber optics and photomedicine.
Against the evolving demands for military‑grade hardware, rail transit equipment and heavy‑duty machinery that run under high‑shock vibrating conditions, anti‑loose connectors serve as indispensable hardware for stable power delivery and high‑speed signal transmission.
For low-frequency RF, electromagnetic testing and power combining systems, conventional resistive power dividers bring high insertion loss, while standard directional couplers cannot provide equal-amplitude signals with 180° phase shift. They fail differential circuits, balanced amplifiers and signal cancellation systems.
For pulsed laser and full-spectrum optical testing, photodiodes and thermopiles have inherent drawbacks. Photodiodes show weak response in infrared band, while thermopiles feature slow response and cannot capture nanosecond narrow pulses.
Loading...
Name
Phone
Organization
Use Case
Database Platform