Laser Wavelength Meter
Yongli CO2 Laser Wavelength Meter: Precision spectral analysis over 9-12μm for researchers and engineers, ensuring wavelength consistency in medicine, marking and specialty-material processing, where absorption and results depend on wavelength. Measurement: Precision diffraction and thermal imaging convert invisible mid-IR into visible data. Each scale division resolves0.02μm, showing shifts under different excitation conditions, standard 10.6μm output and spectral purity. Structure: A precision adjustable base uses three bottom rollers for micrometer alignment. A lifting shutter protects optics during alignment. A clear observation window and simple thermosensitive medium allow direct readings at 9.26μm, 9.54μm or 10.6μm without complex photoelectric conversion. Safety: Power density must remain<40W/cm^2. Instructions emphasize pulse control and attenuation to protect the instrument and maintain professional operating practice. The meter links laboratory theory and industrial use, enabling close understanding of laser-energy properties.
Save to Favorites
Overview
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
Optical Frequency Analyzer (A0070A)
Optical Wavelength Meters
Sufastech
Optical Wavelength Range: Min. 1520 nm; Max. 1625 nm Optical Frequency Modulation Repetition Rate: Max. 370 kHz Optical Frequency Deviation [Repetition Rate: 10 kHz]: Max. 560 GHzpp
The A0070A Optical Frequency Analyzer is a revolutionary system for evaluating FMCW LiDAR lasers, capable of observing optical frequency modulation waveforms in real time just like an oscilloscope. By using a unique method, it extracts only the optical frequency modulation component without being affected by optical intensity modulation. No adjustment is required before measurement; the waveform is displayed immediately after laser input. High linearity ensures accurate measurement over a wide optical frequency deviation.;The A0070A accelerates the development and manufacturing of FMCW LiDAR.
-
Fast Wavelength Meter (FWM8612)
Optical Wavelength Meters
Sufastech
Wavelength Range: 1250~1650 nm(182~240 THz) Wavelength Accuracy [1550nm；1550nm)]: ±0.33 ppm(±0.5 pm@1550 nm) Wavelength Repeatability [1550nm；1550nm)]: ±0.07 ppm(+0.1 pm@1550 nm)
As the demand for communication data continues to grow, larger-capacity optical communication transmission systems are required, which drives optical component and network equipment manufacturers to use coherent communication modules based on wavelength-tunable lasers in transmission backbone networks. Currently, the scope of use of wavelength-tunable lasers and coherent modules will further extend down to metropolitan area networks and even access networks. A very important test for tunable lasers is precise measurement and wavelength calibration. As communication channels continue to increase, from the initial 40 channels to the current maximum of 800 channels, fast and accurate wavelength testing is more critical than ever.
-
Laser Wavelength Tester
Optical Wavelength Meters
Jnewtech
Laser wavelength detector: 2048 CMOS detection pixels measure the center wavelength of lasers anywhere from 200 - 1100nm. Integrating-sphere diameters of 25mm, 38mm and 50mm are available. The software tests laser power stability and center-wavelength drift. The figure below shows center-wavelength variation over 10 hours, with a deviation of approximately 0.1nm. Another figure shows that, just after startup, the TEC temperature controller has not reached its ideal state, so intensity is not very stable and optical output power fluctuates slightly. Contact our sales team with further laser-testing questions.
-
High-Precision Wavelength Meter Servo-A10(DP)
Optical Wavelength Meters
Dospectrum
Overall dimensions: 450mmX402mmX120mm Operating voltage / Current: 12V/2A Control Method: Ethernet port Communication
Related Articles
As a core precision optical component for wavelength screening, frequency locking and spectral demodulation, optical etalons are widely used in high-end scientific research and precision laser equipment.
As a vital emerging sector of modern three-dimensional spatial economy, the low-altitude economy has become a new global growth driver. It covers a wide range of commercial scenarios, including UAV navigation and obstacle avoidance, precise airspace management, aerial mapping, low-altitude logistics distribution, security monitoring and emergency disaster rescue. Nevertheless, frequent extreme weather, complex terrain obstacles and increasingly dense low-altitude flight activities pose severe challenges to the safety and stability of low-altitude aircraft operations.
Laser pump sources are the core energy input component of solid-state lasers and laser amplifiers, and their performance directly determines the output power, beam quality and service life of the entire laser system. In scenarios such as industrial processing, scientific research experiments and high-end equipment, improper pump source selection will not only result in substandard system performance, but also bring a series of problems such as rapid device degradation and high operation and maintenance costs. This article sorts out the core selection logic and key pitfalls of pump source procurement, and provides selection references based on mature, mass-produced high-reliability products to help purchasers efficiently screen suitable products.
Shandong Haucore Optoelectronics Co., Ltd. introduces the HGLD‑792‑COS‑D‑10WB semiconductor laser within its COS series. Delivering an output power of 10 W at a central wavelength of 792 nm, this device adopts gold‑tin bonding COS packaging. Featuring high reliability and long service life, it serves as a preferred pump source for solid‑state lasers and is widely deployed in industrial processing, laser display, medical & aesthetic treatment, scientific research and other fields.
Loading...
Name
Phone
Organization
Use Case
Database Platform