30W Infrared Femtosecond Laser (BFL-1030-30BS)
The BWT BFL-1030-30BS is a 30W infrared femtosecond laser developed by Tianjin BWT Laser Technology Co., Ltd., a national high-tech enterprise founded in 2017 and a holding subsidiary of Beijing BWT Optoelectronics Technology Co., Ltd. Operating at a center wavelength of 1030±2nm with an ultra-narrow pulse width of 300fs and a repetition rate of 1-300KHz, this water-cooled ultrafast laser delivers a maximum single pulse energy of 100μJ with TEM00 beam quality (M²<1.30) and excellent power stability (2.0% rms). Featuring a compact enclosure of L728×W345×H163.5mm, intelligent real-time monitoring, a simple control interface, and a maintenance-free, low-cost design, it is engineered for high-precision industrial micromachining. BWT Laser operates a 2,000-square-meter R&D and production facility with a 700-square-meter cleanroom and a joint laboratory with Tianjin University, and has mass-produced more than ten ultrafast laser models serving industrial micro-processing, precision marking, medical aesthetics, and scientific research.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Product Power (W) | 30W |
| Center Wavelength (nm) | 1030±2nm |
| Repetition Rate (Hz) | 1-300K |
| Pulse Width (fs) | 300 |
| Output Average Power (W) | 30W |
| Maximum Single Pulse Energy (μJ) | 100μJ |
| Maximum Pulse Energy @300KHz (μJ) | >100μJ |
| Spot circularity | 90% |
| Polarization Direction | Vertical polarization |
| Polarization Ratio | 100:1 |
| Operating Voltage (V) | 220V |
| Power Supply | 110V~260V AC |
| Warm-up Time (min) | 20min |
| Operating Ambient Temperature (℃) | 25°C |
| Operating Ambient Humidity | 10%-80% |
| Chiller Set Temperature (℃) | 22°C |
Applications
Key Features
Datasheet
Supplier Information
Related Products
-
100W Subnanosecond Infrared Laser
Laser Modules & Systems
Guoshunlaser
M² Beam quality: ＜1.6 Average Output Power: ＞100 Power adjustment Range: 0~100 %
-
100W Picosecond Green Fiber Laser
Laser Modules & Systems
Guoshunlaser
M² Beam quality: ＜1.3 Average Output Power: ＞100 Power adjustment Range: 0~100 %
-
100W Nanosecond Infrared Fiber Laser
Laser Modules & Systems
Guoshunlaser
M² Beam quality: ＜1.4 Average Output Power: ＞100 Power adjustment Range: 0~100 %
-
100W Femtosecond Infrared Laser
Laser Modules & Systems
Guoshunlaser
M² Beam quality: ＜1.3 Average Output Power: ＞100 Power adjustment Range: 0~100 %
-
10W Compact Picosecond Infrared Laser
Laser Modules & Systems
Guoshunlaser
M² Beam quality: ＜1.2 Average Output Power: ＞10 Power adjustment Range: 0~100 %
Related Articles
In photonics and laser technology, devices that manipulate optical signals via the electro-optic effect form the backbone of precision optical systems. Electro-optic phase modulators and electro-optic deflectors are two prominent examples of this device category. As a critical hardware solution for high-speed, high-accuracy laser beam direction control, electro-optic deflectors are widely deployed across industrial and research settings. Below is a detailed overview of their core structure, key performance drivers, and primary use cases.
As a top‑tier supplier of tunable laser chips, Shandong Zhongxin Optoelectronics Technology Company has newly launched the world’s first budget‑friendly fiber‑Bragg‑grating (FBG) demodulator and scanning module.
A laser bar is an array semiconductor laser chip integrated with dozens of emitters, which realizes hundred-watt quasi-continuous output on a single chip. With regular emitter arrangement and controllable fill factor, integrated thermal design and superior wall-plug efficiency compared to single chips, it acts as the core light source for high-power pumping, medical lasers and precision processing.
BEIJING JIEPU TREND supplies YAG+Er:YAG+YAG bonded composite slab laser crystals for high‑power solid‑state laser systems. The monolithic slab consists of two undoped YAG end‑cap layers and a central Er‑doped YAG gain segment. The overall dimension is 9 mm×9 mm×9 mm.
Loading...
Name
Phone
Organization
Use Case
Database Platform