NL-D6521-01 (Point Light Source)
NL-D6521-01 is a high-performance PIN Point LED. A specially designed package eliminates stray leakage/reflections;optimized optics produce a clean,uniform circular spot. Emitting aperture:170um. Package dimensions:2.1×2.1×1.0,similar to2121;no package-dimension unit is supplied in this paragraph. The supplied model-specific PDF introduction identifies a red LED point source with Φ170μm emitting size.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Emitting-Area Dimensions [Product Introduction / Features on Page 1; Dimension Drawing Not Used] | Φ170 |
| Forward Current I_F [Maximum Ratings；Ta=25°C] | 70 mA |
| Pulse Current I_FP [Maximum Ratings; Ta=25°C; Pulse Width 300μs / Duty Cycle 5%] | 1000 mA |
| Reverse Voltage V_R [Maximum Ratings；Ta=25°C] | 3 V |
| Junction Temperature Tj [Maximum Ratings；Ta=25°C] | 115 °C |
| Operating Temperature Topr. [Maximum Ratings；Ta=25°C] | -40~+85 °C |
| Storage Temperature Tstg. [Maximum Ratings；Ta=25°C] | -40~+85 °C |
| Forward Voltage Drop V_F [Electro-Optical Characteristics；Ta=25°C；I_F=20mA] | min:1.8 V; typical:2.0 V; max:2.8 V |
| Reverse Current I_R [Electro-Optical Characteristics；Ta=25°C；V_R=3V] | max:10 μA |
| Output Power P_O [Electro-Optical Characteristics；Ta=25°C；I_F=20mA] | min:2.5 mW; typical:3.0 mW; max:3.5 mW |
| Peak Wavelength λ_P [Electro-Optical Characteristics；Ta=25°C；I_F=20mA] | typical:650 nm |
| Half-Width Δλ [Electro-Optical Characteristics；Ta=25°C；I_F=20mA] | typical:18 nm |
| Half-Value Angle Δθ [Electro-Optical Characteristics；Ta=25°C；I_F=20mA] | typical:±60 deg. |
| Storage Temperature after Unpacking [Independent Note on Page 4] | 5~30 °C |
| Storage Humidity after Unpacking [Independent Note on Page 4] | <60 % |
| Reflow-Soldering Time Limit after Unpacking [Independent Note on Page 4] | 72 小时 |
| Post-Soldering Cleaning Conditions [Independent Note on Page 4; Alcohol Cleaning Recommended; Pretest before Ultrasonic Cleaning to Confirm Whether LEDs Are Damaged] | 30°C/3 Minutes or 50°C/30 Seconds |
Applications
Key Features
Datasheet
Supplier Information
Related Products
-
Monochromatic LED Fluorescence Module STL-MOFL-U
Light-Emitting Diodes (LEDs)
Situoli
Light Source: 10W Adjustable LED Service Life: >60000 小时 Light-Intensity Control Range: 0%~100% Linear Adjustment
SITUOLI's monochromatic LED illumination unit provides brightfield or fluorescence illumination for upright microscopes. Stable performance and efficient fluorescence illumination serve varied applications. A short optical path increases brightness and fluorescence excitation efficiency for better signal detection; adjustable intensity reduces photobleaching. The specially designed LED source lasts 60,000 hours. Combined with objectives, tube lenses, camera interfaces and cameras, it forms a direct microscopy imaging system. Advanced STL-IMCS video/image-processing software supplied with the camera supports life-science and other research. It integrates into automation such as automatic slide readers and pathology slide scanners, primarily for fungal, microbial and gynecological testing.
-
Monochromatic LED Fluorescence Module STL-MOFL-B
Light-Emitting Diodes (LEDs)
Situoli
Light Source: 10W Adjustable LED Service Life: >60000 小时 Light-Intensity Control Range: 0%~100% Linear Adjustment
SITUOLI's monochromatic LED illumination unit provides brightfield or fluorescence illumination for upright microscopes. Stable performance and efficient fluorescence illumination serve varied applications. A short optical path increases brightness and fluorescence excitation efficiency for better signal detection; adjustable intensity reduces photobleaching. The specially designed LED source lasts 60,000 hours. Combined with objectives, tube lenses, camera interfaces and cameras, it forms a direct microscopy imaging system. Advanced STL-IMCS video/image-processing software supplied with the camera supports life-science and other research. It integrates into automation such as automatic slide readers and pathology slide scanners, primarily for fungal, microbial and gynecological testing.
-
Sapphire-Based GaN Epitaxial LED
Light-Emitting Diodes (LEDs)
Jmwafer
Sapphire-Based GaN LED Epitaxy (2~8 Inches) - Substrate Diameter: 50.8 mm Sapphire-Based GaN LED Epitaxy (2~8 Inches) - Substrate Diameter: 100mm Sapphire-Based GaN LED Epitaxy (2~8 Inches) - Substrate Diameter: 150mm
Sapphire-Based Epitaxial GaN LED Is a Light-Emitting Diode with GaN Grown on Sapphire.
-
Silicon-Based GaN Epitaxial LED
Light-Emitting Diodes (LEDs)
Jmwafer
Silicon-Based GaN LED Epitaxy (2~8 Inches) - Substrate Diameter: 50.8mm Silicon-Based GaN LED Epitaxy (2~8 Inches) - Substrate Diameter: 100mm Silicon-Based GaN LED Epitaxy (2~8 Inches) - Substrate Diameter: 150mm
GaN-on-Si LED Epitaxy Combines Efficient GaN Emission/Low-Cost Silicon for LED Chips,Important Research Direction.
-
Gallium Arsenide Epitaxial LED
Light-Emitting Diodes (LEDs)
Jmwafer
GaAs Red LED Epitaxy (2~6 Inches) - Substrate Diameter: 2 inch - 50.8mm GaAs Red LED Epitaxy (2~6 Inches) - Substrate Diameter: 4 inch - 100mm GaAs Red LED Epitaxy (2~6 Inches) - Substrate Diameter: 6 inch - 150mm
Epitaxial P/N/MQW Layers on GaAs,Primarily IR/NIR Emission700–1100nm.
Related Articles
In photonics and laser technology, devices that manipulate optical signals via the electro-optic effect form the backbone of precision optical systems. Electro-optic phase modulators and electro-optic deflectors are two prominent examples of this device category. As a critical hardware solution for high-speed, high-accuracy laser beam direction control, electro-optic deflectors are widely deployed across industrial and research settings. Below is a detailed overview of their core structure, key performance drivers, and primary use cases.
GYOPTICS 30 W collimated isolator is a highly‑reliable passive optical component optimized for 1064 nm high‑power laser systems. Characterized by low insertion loss and superior backward‑light suppression capability, it effectively blocks reflected light traveling back toward the laser resonator, eliminating back‑reflection‑induced instability and protecting fiber or solid‑state laser sources during long‑term operation.
For 1D optical detection scenarios such as spectrum acquisition, dimensional measurement and optical scanning, area array CMOS/CCD suffer redundant pixels, high cost and slow row readout speed.
Laser pump sources are the core energy input component of solid-state lasers and laser amplifiers, and their performance directly determines the output power, beam quality and service life of the entire laser system. In scenarios such as industrial processing, scientific research experiments and high-end equipment, improper pump source selection will not only result in substandard system performance, but also bring a series of problems such as rapid device degradation and high operation and maintenance costs. This article sorts out the core selection logic and key pitfalls of pump source procurement, and provides selection references based on mature, mass-produced high-reliability products to help purchasers efficiently screen suitable products.
Loading...
Name
Phone
Organization
Use Case
Database Platform