Microscope Body Stand IMA-BRA400

JCOPTIX microscope frames comprise a vertical support rail and breadboards at both ends. Five rail heights—350 mm, 400 mm, 500 mm, 750 mm, 1000 mm—form the basis of modular custom imaging equipment. Precision-machined 95 mm profile rails are perpendicular to the microscope table, providing stable long-term support and vibration damping. Each face has a 95 mm dovetail for flexible module positioning. Parts/assemblies can be selected freely. The top breadboard's female D1N dovetail, Ø53.2 mm and α=60°, and SM1 aperture precisely position modular optical axes 196.5 mm from the frame support. Top breadboard. Model: IMA-TP1. Top female D1N dovetail, Ø53.2mm, α=60°; bottom SM1 aperture; M6 through-threads at 25 mm pitch; 66 mm and 95 mm profile-rail mounting holes; 60 mm cage compatibility. JCOPTIX top boards have 66 mm and 95 mm rail holes and mount directly to the end faces of 66 mm and 95 mm rails. With IMA-BP1/IMA-BP2 bottom boards and 95 mm rails they form microscope frames. Custom wide-field observation, epi-illumination, or other modules mount on top. An Ø38.1 mm through-hole has a female D1N dovetail above, Ø53.2mm and α=60°, and an SM1 threaded mounting recess below. Elsewhere, M6 through-threads at 25 mm pitch allow mounting from either side. Four Ø6 mm through-holes near the Ø38.1 mm aperture fit 60 mm cages; side M4 locking screws accept a 2 mm key. Bottom breadboards. Models: IMA-BP1, IMA-BP2. M6 holes at 25 mm pitch; 66 mm/95 mm rail mounting; stainless-steel or marble versions. JCOPTIX bottom boards have 66 mm and 95 mm rail holes and accept 66 mm and 95 mm rails directly. With IMA-TP1 top boards and 95 mm rails they form microscope frames. M6 through-thread arrays at 25 mm pitch permit either-side mounting. Stainless-steel and marble versions are available. Microscope frame. Model: IMA-BRA400. 95 mm dovetail profile for flexible expansion-module placement; dovetail-center distance from rail 196.5 mm; top/bottom breadboards have M6 through-threads at 25 mm pitch; compatible with 60 mm cages. JCOPTIX frames comprise a vertically installed 400 mm-long 95 mm rail and two breadboards at the ends of the 95 mm rail, forming a modular custom-imaging base. Precision-machined 95 mm rails are perpendicular to the microscope table for stable support and damping. Each face has a 95 mm-wide dovetail for flexible positioning. The top breadboard has a female D1N dovetail, Ø53.2mm and α=60°, and SM1 aperture, locating modular optical axes 196.5 mm from the support rail. Top/bottom breadboards have M6 through-threads at 25 mm pitch for either-side installation. Breadboard handles are included. 95 mm profile rails.Models: MRR95-350, MRR95-400, MRR95-500, MRR95-750, MRR95-1000. Cross-section 95 mm × 95 mm; full-length laser marks at 1 mm intervals; lengths 350-1000 mm; end M6 holes and Ø3 dowel holes; two sides have M6 holes and Ø6.5 mm through-holes at 50 mm spacing. JCOPTIX MRR95 rails are 95 mm wide for stable horizontal/vertical paths. Adjacent sides have M6 holes at 50 mm pitch and Ø6.5 mm through-holes for MRR-300, MRR40-300, MRR66D-500, or TB-1250 breadboards. End M6 holes fit vertical plates. Dovetail carriers snap on anywhere. Full-length 1 mm laser graduations measure carrier movement. Standard lengths are 350-1000 mm.

Save to Favorites