90° Flip Mount MFP-90

JCOPTIX flip mounts are compact, convenient, and flexible, inserting/removing optics from paths. Round-optic 90° mounts have precision detents at 0°/90°. Two nylon-tipped screws accepting 1.5 mm keys lock anywhere between 0° and 90°. MFP-90 90° platforms use two nylon screws for 25.4 mm or rectangular optics, with pivots holding almost any angle from 0° to 90°. 90° mounts for round optics. Models: MFR05-90, MFR1-90, MFR2-90. For Ø12.7 mm, Ø25.4 mm, Ø50.8 mm optics. Repeatability <25 µrad at 0°/90°. Holding force at 0º/90º, lockable throughout travel. JCOPTIX 90° mounts accept Ø12.7 mm/Ø25.4 mm/Ø50.8 mm optics and bottom M4 post mounting. Stops hold 0° or 90°; two nylon screws with 1.5 mm keys lock anywhere between 0°/90°. A central hole accepts a cage rod, secured by 1 side M3 cup-point screw using a 1.5mm key. Tightening M3 secures the mount. These 90° mounts do not fit cage systems, although several 90° mounts can be linked on rods. Each includes a retaining ring and 1.5 mm wrench. Factory-set slotted detent screws must not be turned. 90° mount for round/rectangular optics. Model: MFP-90. For Ø25.4 mm optics or rectangles 24 × 10 mm to 50 × 50 mm, up to 7 mm thick. Angular repeatability <25 µrad at 0°. JCOPTIX 90° clamps accept Ø25.4 mm round optics or 24 × 10 mm to 50 × 50 mm rectangles up to 7 mm thick. Two nylon-tipped clamp screws prevent scratches. For greater force, retract nylon tips and use aluminum arms directly. Fixing/nylon locking screws use the supplied 2 mm key. The pivot stops at almost any angle from 0° to 90° without extra locking force. Magnets at 0°/90° add holding force and draw the mount through small closing angles near 0°/90°. The 90° base has M6 and M4 countersunk holes for posts.

Save to Favorites