KD*P
EOM

KD*P

Supplier
Optoaxis
Category
EOM
Origin
China

KD*P crystal is widely applied for electro-optic application as Q-switch and Pockels cells. KD*P is routinely used for Q-switching applications from the uv out to about 1.1 µm where absorption limits its use in active cavities, although it can be useful at longer wavelengths when a few percent of absorption can be tolerated. KD*P has high optical uniformity and is useful for large aperature applications. The device of longitudinal Pockels' cell using crystal of >98% deuterated DKDP is normally used for Q-switch of laser radiation. These Pockels' cells are manufactured from the crystals that have been specially selected for their low optical loss and strain free property. The crystal is in the form of a cylinder and two silver ring electrodes are used to produce the longitudinal electric field. Physical and Chemical Properties: Please view E-O crysals physical Properities (dpf format) The Sellmeier equations (l in µm ): no2 = 1.9575544 + 0.2901391/(l2 - 0.0281399) - 0.02824391l2 ne2 = 1.5005779 + 0.6276034/(l2 - 0.0131558) - 0.01054063l2 Optical and Spectral Properties: Please view E-O crysals optical and electric-optical Properities (dpf format)

Request a Quote Download Datasheet
Save to Favorites Save to Favorites

Overview

KD*P crystal is widely applied for electro-optic application as Q-switch and Pockels cells. KD*P is routinely used for Q-switching applications from the uv out to about 1.1 µm where absorption limits its use in active cavities, although it can be useful at longer wavelengths when a few percent of absorption can be tolerated. KD*P has high optical uniformity and is useful for large aperature applications. The device of longitudinal Pockels' cell using crystal of >98% deuterated DKDP is normally used for Q-switch of laser radiation. These Pockels' cells are manufactured from the crystals that have been specially selected for their low optical loss and strain free property. The crystal is in the form of a cylinder and two silver ring electrodes are used to produce the longitudinal electric field. Physical and Chemical Properties: Please view E-O crysals physical Properities (dpf format) The Sellmeier equations (l in µm ): no2 = 1.9575544 + 0.2901391/(l2 - 0.0281399) - 0.02824391l2 ne2 = 1.5005779 + 0.6276034/(l2 - 0.0131558) - 0.01054063l2 Optical and Spectral Properties: Please view E-O crysals optical and electric-optical Properities (dpf format)

Specifications

ParameterValue
Dimension tolerance±0.1mm
Flatness [@633nm]<l/8 @633nm
Surface quality: Scratch/Dig10/5
Parallelismbetter than 20 arc sec.
Perpendicularitybetter than 15 arc min
Angle tolerance△q < 0.5°, △f < 0.5°
AR coatingUncoatings
Clear aperture>90% central area
Transmitting wavefront distortion [@633nm]less than l/8 @ 633nm

Key Features

High Damage Threshold High Extinction and Contrast Ratio Low cost

Datasheet

Please provide your email to download the datasheet.

Your name
Email Address

Invalid email format. Please try again.

Send Request

Supplier Information

Op
Optoaxis
View Supplier →
Optoaxis Photonics Inc was established in Sep,2008. Which specializes in laser lensesfeaturing from the UV-Visible-IR, including F-Theta flat field scanning lenses, telecentric scanning lenses, beam expanders, focus lenses , spherical lenses ( PCX,PCC,DCX,DCC, Achromatic ), asphericallenses, windows, mirrors, prism, Laser crystals. We also provide many kinds of Anti Reflective Coatings(AR), Partial Reflective Coatings, High Reflective Coatings(HR).

Request a Quote

Our team responds within 24–48 hours
KD*P
Optoaxis · EOM
Direct from Manufacturer
Your inquiry will be sent directly to the manufacturer
Photonics Source Platform
We handles the inquiry on your behalf
Your information is protected and will never be shared without consent.
Contact Us

Loading...

GetExperimental Plan

Name

Phone

+86

Organization

Use Case

AI Parametric Selection
Smart Match · Precise Recs
Enter Specifications
AI Smart Matching
Get Best Matches
Skip Manual Comparison
Find Best Solutions Fast
Select Now →