YT-M916 Specification
The 16-way integrated adjacent-frequency modulation front-end, is one of the CATV front-end equipment.
Request a Quote
Download Datasheet
Overview
The 16-way integrated adjacent-frequency modulation front-end, is one of the CATV front-end equipment. To achieve 16-channel video / audio signal in the 47 ~ 870MHz range of any channel RF modulation. The modulator allows input of 0.7 to 1.4V video source signals such as satellite receivers, TV cameras or TV demodulators. In the normal frequency offset conditions, through the external continuous adjustment can be input 0.775V ± 10dB / 10KΩ audio signal. The modulator uses intermediate frequency processing, the use of SAW filter processing, effectively ensuring the residual sideband characteristics, making it more suitable for adjacent frequency transmission system. IF and local oscillator circuits are used phase-locked loop technology, high frequency stability. The use of high selectivity channel filter, effectively guarantee the entire CATV band good parasitic output suppression and carrier to noise ratio performance. The product 16-channel modulator for the independent module, channel configuration is convenient, mixed amplification output. The product has been completed before the factory finished the internal level of the matching debugging, the construction site to be modulated AV signal can be modulated, integrated installation, easy to operate. 5、Panel operating instructions Front panel (1) Output level adjustment: counterclockwise to reduce the output level, and vice versa. (2) A / V adjustment: Image sound carrier power ratio adjustment (factory preset at -17dB). (3) Audio frequency offset adjustment: adjust the volume size, clockwise adjustment is increased (factory preset to ± 50KHz). (4) Video modulation adjustment: adjust the image brightness, clockwise adjustment to increase (factory preset to 87.5%). Rear panel (5) audio / video input: RCA socket, 1-16 road. (6) -20dB test port (7) RF output: modulation signal output, F-type British connector. (8) Output level adjustment: 0 ~ -20dB (9) AC power socket: for power supply in series. (10) Power input: Connect 220V / 50Hz AC power supply. Installation Use: Note: After the completion of this equipment, must be connected to the power supply machine for more than 15 minutes and then make the following adjustments: 1, the standard audio and video signals with audio and video lines are connected to the machine rear panel audio input and video input port. 2, the use of multiple sets of modulators, the upper part of the power adapter plug (10) into the lower modulator (9), the last modulator power plug into the power supply board; single-group modulator use, The power plug (10) can be inserted directly into the power supply board. 3, the product has been completed before the factory finished level matching debugging, construction site input to be modulated AV signal can be. 4, the rear panel of the RF output (7) access CATV system. 5, adjust the corresponding channel (3) and (4), with the TV observation, sound and image can be the best. 6, A / V at the factory has been preset to -18dB, no need to adjust. In case of failure can not be ruled out, please power dealers or company branches. Do not disassemble yourself to avoid permanent damage! (Subject to change without notice.)
Specifications
| Parameter | Value |
|---|---|
| Video options-Input level | 0.7~1.4 |
| Radio frequency options-Carrier frequency accuracy | ≤5 kHz |
| Video options-input resistance | 75 Ω |
| Radio frequency options-Carrier frequency spacing accuracy | ≤100 Hz |
| Video options-Modulation degree | 87.5 % |
| Radio frequency options-Standard output level | ≥105 dBμV |
| Video options-In-band flatness | ≤±1.5 |
| Radio frequency options-A / V (externally adjustable) | -10 … -20 |
| Video options-Differential gain | ≤5 % |
| Radio frequency options-Output impedance | 75 Ω |
| Video options-Differential phase | ≤5 ° |
| Radio frequency options-Output reflection loss | ≥12 dB |
| Video options-Color brightness delay | ≤60 ns |
| Radio frequency options-With internal and external parasitic output | ≤-60 dB |
| Video options-Signal to noise ratio | ≥55 dB |
| Radio frequency options-Side band suppression | ≥60 dB |
| Video options-K2T coefficient | ≤5 % |
| Radio frequency options-Output level adjustable range | 0 … -20 |
| Video options-Input reflection loss | ≥20 dB |
| Radio frequency options-In-band carrier-to-noise ratio | ≥60 dB |
| Audio-Input level (externally adjustable) | 0.775V±10 |
| normal-Supply voltage | AC220 |
| Audio-Input impedance (unbalanced) | 10k |
| normal-Power consumption | ≤80 W |
| Audio-Frequency offset | ±50 kHz |
| normal-Working temperature | -10 … +55 |
| Audio-Pre-emphasis | 50 μs |
| normal-Video and audio connector type | “RCA” |
| Audio-Flatness (40Hz ... 15kHz) | ≤±1.5 |
| normal-RF connector type | “F” |
| Audio-Distortion (fm = 1kHz △ f = 50kHz) | ≤1 % |
| normal-Dimensions (L × W × H) | 483 mm × 210 mm × 176 mm |
| Audio-Signal to noise ratio | ≥60 dB |
| normal-weight | 10 kg |
Key Features
1,47 ~ 870MHz band any sixteen channels;
2, IF modulation, the use of surface acoustic wave filter processing, superior performance;
3, IF and local oscillator circuits are used phase-locked loop technology, high frequency stability;
4, video modulation, audio frequency deviation, RF output level, A / V front panel adjustable;
5, high performance, high reliability and easy operation.
The use of high-quality switching power supply, to ensure that the machine perennial stable work.
Datasheet
Please provide your email to download the datasheet.
Your name
Email Address
Invalid email format. Please try again.
Send Request
Supplier Information
Yantai Yatai Photoelectricity Equipment Co., Ltd. was founded in 1997. We have a factory covering 1000m2 dust-free workshops. We have 150 workers in total and 21 years of experience. Since established, we have worked with many domestic and overseas government projects for CATV. We are ISO-certificated. This is how we keep good quality and reliable cooperation for global valued customers.
Yatai Company can independently develop and produce YOC-1550nm external modulated optical transmitters, YOT-1310nm series optical transmitters, YOA-1550nm series erbium-doped fiber amplifiers, erbium ytterbium co-doped high-power fiber amplifiers and FTTH products. HD modulator, EDFA, RF power amplifier, epon onu, ftth node, fusion Splicer and ftth optical receiver are very popular.
Our company is located in a beautiful coastal city - Yantai. We integrate manufacturing, development, production, and sale as a whole. As a high-tech enterprise, we have high-quality talents.
We insist on the principle of "Devoted to communications technology and IT industry; pursuing remarkable quality". We value talents and regard first-class products and services as the final pursuit.
Contact Us
Loading...
GetExperimental Plan
Name
Phone
+86
Organization
Use Case

Global Photonics Products
Database Platform
Database Platform
With 16 years of experience, we provide high-quality products and services to universities, research institutes, and industry.
50+ Detailed Categories · 3,000+ Global Brands · 100,000+ Photonics Products
1 Million+
In-depth analysis of professional academic resources in photonics
300,000
ProductsDatasheets Available Free
We will keep your personal information strictly confidential.
Product Quote
+86
* Select the quoting party:
By submitting, you agree to the User Service Agreement and Privacy Policy