Multilayer Perovskite Spin Coater
The full automatic multilayer piping machine is suitable for coating of the coating of the plating material, semiconductor, crystal, CD-ROM, copy preparation etc. The machine automatically completes the entire process of dripping, twitching, drying; it can also cover two thin film lines in turn, each of which has a maximum of 500 times, and achieves lacquering of the mill. The machine can be used for preparation of coatings of acid, alkaline coating solutions. The equipment is designed for vacuum suctions of different sizes, depending on the size of the sample, by using vacuum suction to fix the base.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Installation conditions - electricity [It has to be good.] | AC220V 50Hz, must be well located. |
| Installation Conditions - Gas | Condensed gaseous cargo, protected by its own regulations |
| Installation conditions - workstations - dimensions | 600mm×600mm×900mm |
| Installation conditions - workstation - load | 50 kgs and above |
| Host - Power | 24 V |
| Wrinkle pump - power | 24 V |
| Heating - Power | 220V 50HZ |
| Total Power | 1200 W |
| Heating - Power | 1350 W |
| Rotation speed [* Small increment is 1rpm.] | 500-10000rpm (* small increment 1rpm). |
| Run Program | Each coating operation can use two program groups, A and B. Each group runs in six segments and can cycle 500 times. Together, the two groups can coat up to 1000 film layers. |
| Rate of increase and reduction settings [Increment is an integer multiple of 10] | 10rpm/s-2000rpm/s (integers of 10 times the increment) |
| Heating range | RT-200°C (heat resistant and corrosive polytoxidants in cavity) (carbon fibre heating tubes) |
| Poly-tetrafluoro vacuum cleaners and aluminium suctions - Specification | 1 inch, 2 inches, 4 inches |
| Tiled machine -- dimensions | 450 mm × 400 mm × 580 mm |
| Wrinkle pump -- dimensions | 270 mm × 310 mm × 280 mm |
| Weight | 50 kg |
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
Large electron-beam evaporation optical coating equipment HCEB-2700 Optical Coatings Hcvac
Chamber dimensions [Customizable (Data for Reference Only)]: Φ2700 x H1850 Load capacity [Customizable (Data for Reference Only)]: 5.3 m2 Structure [Customizable (Data for Reference Only)]: Vertical, front-opening door, SUS304 stainless steel
This series was developed for mass-production market needs. Production-proven equipment offers high productivity and the lowest ownership cost for cost-optimized volume production of optical components. It can produce AR, UV/IR cutoff filters, AF, hard coatings, decorative coatings, ITO coatings, bandpass filters and HR coatings. Equipped with an electron gun, pocket-type, kidney-shaped or annular crucibles and an impedance-type evaporation source. Optical or quartz-crystal thickness monitoring enables automatic control of deposition rate and coating processes. Optional RF/Kaufman-type/Hall-type ion sources. AR coatings (substrate glass transmittance >91.5%): in the 420-680nm band, single-sided average transmittance >95% and reflectance less than 0.5% (average); double-sided average transmittance >98% and reflectance less than 0.5% (average). AS/AF coating test standards: initial contact angle 115±5°; steel-wool abrasion test using 0000# steel wool over 10*10mm, 40 strokes/min, load 1Kg: contact angle greater than 100° after 5000 reciprocating rubbing cycles; eraser test using a 6mm-diameter eraser, 25 strokes/min, load 1Kg: contact angle greater than 100° after 2500 reciprocating rubbing cycles. Note: glass test samples must be precision-polished glass specifically for touchscreen cover plates, with a clean, smooth surface.
-
Antireflection-coated sapphire window Optical Coatings Uni-lens
Abbe number: 72.24 Birefringence [Visible light orthogonal to the optical axis]: 0.008 Clear Aperture Dimension: ≥90%
Sapphire windows retain high strength at elevated temperatures, with good thermal properties and excellent transparency. They resist common acids and alkalis at temperatures up to 1000°C and hydrogen fluoride below 300°C. These properties support use in harsh environments requiring optical transmission from vacuum ultraviolet to near infrared.
-
BK7 antireflection-coated window Optical Coatings Uni-lens
Material [Question 1 in the body text]: N-BK7, Schott borosilicate Dimensional Tolerance [Standard; No unit stated in the table]: +0.0/-0.2 Thickness Tolerance [Standard; No unit stated in the table]: ±0.2
BK7 windows are the most common window type, with good performance in visible and near-infrared bands. BK7 windows are ideal where transmitted-beam deviation must be minimized and are suitable for AR coatings.
-
Antireflection-coated colored-glass window Optical Coatings Uni-lens
Material: Color Glass Type(Cut-off Glass, Absorption-Selective Glass, Neutral Glass) Dimensional Tolerance: +0.0, -0.1 Thickness Tolerance: ±0.1 mm
Colored glass modifies the spectral characteristics of optical radiation for scientific experiments and industrial applications requiring such changes. Colored-glass filters can be combined to modify the passband or increase attenuation.
-
Right-angle prism with broadband antireflection-coated hypotenuse Optical Coatings Uni-lens
Available materials [Series supply]: N-BK7, UV fused silica or other optical glass Dimensional Tolerance [Standards]: +0/-0.2 Dimensional Tolerance [Processing Upper Limit]: +0/-0.05
Right-angle prisms commonly alter optical paths or redirect beams by 90°. Designed with a 90° angle, they produce inverted or reversed left-handed images depending on orientation. Using two together is ideal for image or beam displacement. Also called mirror-image reflecting prisms.
Related Articles
Macro channel water-cooled stacked laser diodes integrate dozens of laser bars into one vertical stacked module with large-diameter macro flow cooling channels.
The CNGE 384 uncooled infrared core module is a high-performance core component for thermal imaging systems. Adopting mature uncooled infrared detection technology, it realizes all-weather thermal radiation perception and high-definition imaging without refrigeration equipment.
VCSEL, short for Vertical Cavity Surface Emitting Laser, is a widely used semiconductor laser component in modern optoelectronics. Unlike traditional edge-emitting lasers, VCSEL emits laser light vertically from its chip surface. Thanks to its low power consumption, stable beam quality, low cost, and easy integration, it has become the core light source for 3D sensing, wearable devices, and high-speed optical communication.
Founded in Beijing in 2011, Beijing FJR Opto-electronic Technology Co., Ltd. specializes in R&D, manufacturing and sales of infrared thermal imaging equipment and complete optoelectronic systems.
Loading...
Name
Phone
Organization
Use Case
Database Platform