40G QSFP+ active cable OTQ-40G-AOC-XX
OTQ-40G-AOC-XX is a high-performance active optical cable for short-range multilane data communication and interconnection. Four lanes in each direction provide 40Gbps aggregate bandwidth at 10Gbps per lane, with a nominal wavelength of 850nm. It uses multimode fiber in a QSFP+-to-QSFP+ configuration; the family description lists lengths from 1m to 30m. A 38-contact edge connector and QSFP-based modules at both cable ends provide full-duplex four-channel operation, hot-pluggable electrical interfaces, Rx Pre-Emphasis, EEPROM Serial-ID access over two wires and low power. Family QSFP interfaces comply with SFF-8436; operating case temperature is 0°C to +70°C, with Laser Class 1 IEC/CDRH compliance.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Data rate | 40 G/s |
| Wavelength | 850 nm |
| Fiber Type | MM |
| Source | VCSEL |
| Reach | 0-30M |
Applications
Datasheet
Supplier Information
Related Products
-
Tera2061 HDMI2.1 cable tester Fiber Cables & Bundles Terawan
Bit rate [Supports HDMI2.0/2.1/2.2 rates]: 1.25~12.5 Gb/s Bit error detection end: Differential Bit error reporting function: BER and total error bit
Tera2061 HDMI2.1 cable tester: Tests 8K and 4K HD HDMI2.1/2.0 cables, hybrid optical/electrical cables, and AOC. Bit rate 1.25~12.5Gb/s, supporting HDMI2.0/2.1/2.2 rates.
-
Tera2063 USB3.0 cable tester
Fiber Cables & Bundles
Terawan
Bit rate [Supports standards 3.1 and 3.2]: 5~12.5 Gb/s Pattern: PRBS 7、PRBS9、PRBS15、PRBS23、PRBS31 Transmitter output amplitude: 200~800 mVpp
-
Tera2141 40G/100G dual-port module/AOC tester Fiber Cables & Bundles Terawan
Power Supply: 9 V Test interface: QSFP+/QSFP28 Number of PRBS signal channels [QSFP+/QSFP28; 10G or 25G~28Gb/s]: 4 channels
The Tera2141 dual-port module/AOC tester supports 40G/56G/64G/100G. QSFP+/QSFP28 interfaces test services and performance of 100GE QSFP28 modules (SR, CWDM, PSM4, LR) and 40GE QSFP+ modules (SR, LR), with 4-channel precision 10G/25G bit-error testing. It also tests 100GE or 40GE AOC/DAC performance.
-
Tera2400 400G PAM4 bit-error-rate tester Fiber Cables & Bundles Terawan
The Tera2400-1 supports 50G/100G/200G/400G/800G electrical pattern generation and bit-error detection, plus optical-module analysis, generation, and error detection for 50G/100G QSFP+/QSFP28 and 200G/400G QSFPDD. Its 16 RF ports support 10G/25.7G/28.05Gb/s for 10GE/25GE/40GE/100GE/128GFC/200G/400G module/AOC development, providing up to 16 channels of 10G~28G NRZ and precision 50G/200G/400G PAM bit-error testing.
-
Type-c test board Fiber Cables & Bundles Terawan
Related Articles
For semiconductor, coating and laboratory vacuum chambers, thermal conductivity gauges suffer large measurement errors caused by gas type and ambient temperature.
Founded in Beijing in 2011, Beijing FJR Opto-electronic Technology Co., Ltd. specializes in R&D, manufacturing and sales of infrared thermal imaging equipment and complete optoelectronic systems.
A microlens array (MLA) is a high-precision optical component composed of hundreds or thousands of tiny, uniformly arranged micro lenses on a single flat substrate. Unlike traditional single lenses that focus one light beam, a microlens array can split, homogenize, and reshape light on a micro scale. It is widely paired with VCSELs, lasers, and image sensors, becoming a core part of modern miniature optical systems.
A laser bar is an array semiconductor laser chip integrated with dozens of emitters, which realizes hundred-watt quasi-continuous output on a single chip. With regular emitter arrangement and controllable fill factor, integrated thermal design and superior wall-plug efficiency compared to single chips, it acts as the core light source for high-power pumping, medical lasers and precision processing.
Loading...
Name
Phone
Organization
Use Case
Database Platform