WinCamD Series Beam Profiler S-WCD-QD-2000
1.1 WinCamD-LCM series laser beam profilers: WinCamD-LCM is a cost-effective general-purpose beam-profiler series with a broad 190-1610 nm wavelength range, beam diameters spanning 55 um-11 mm and high resolution of 4.2MPixel. It also offers an electronically triggered global shutter and update rates up to 60+Hz. The series works with full-featured software requiring no license fee, with unlimited installations and free software updates. Applications include continuous and pulsed laser profiling, real-time laser-system monitoring and M2 beam-quality measurement with the M2DU rail. 1.2 WinCamD-LCM-NE series near-infrared-enhanced beam profilers: the CMOS beam profiler uses a new 1-inch high-resolution CMOS sensor with no smearing. Shutter and trigger options simplify pulse capture for continuous and pulsed laser profiling. Spectral response is improved between 400 and 1000 nm, but sensor microlenses make it unsuitable for UV wavelengths, and a TEL phosphor coating is unavailable. 1.3 WinCamD-GCM series beam profilers for long-distance connections: designed for applications requiring long cables, the GCM uses the same sensor as the WinCamD-LCM (11.3 x 11.3 mm active area, 4.2 million pixels, 5.5 x 5.5μm pixels and global shutter). GigE Vision suits remote beam profiling requiring long-distance transmission of large data volumes. 1.4 WinCamD-QD series quantum-dot SWIR beam profilers: colloidal quantum-dot sensors provide high-quality profiling of visible, short-wave infrared (SWIR) and extended short-wave infrared (eSWIR) sources. With 15 µm pixels, a broad 350-2000 nm wavelength range and global shutter, the series offers outstanding beam profiling. Signal-to-noise ratio over 2100:1 enables ISO 11146-compliant measurements. The advanced colloidal quantum-dot sensor has very high sensitivity and a global shutter for pulsed-beam profiling. Highly customizable, user-centered software has no license fees, unlimited installations and free updates. It supports interfacing with external programs, data logging and fully automatic M2 measurements with the M2DU translation stage, all without extra fees. Sampling, absorptive and reflective attenuation options sufficiently attenuate higher-power beams before profiling. 1.5 WinCamD-IR-BB series mid-infrared beam-quality analyzers: an imaging solution for MWIR and FIR lasers covering near- to mid-infrared wavelengths (2um-16um), measuring continuous and pulsed lasers from microwatt beams to lasers at the kilowatt level and above. Its user-friendly software interface enables convenient, fast analysis and statistics of all beam-spot information. Maximum measurable collimated-beam diameter is 25mm. Accessories extend measurement to very small spots of a few um, very large spots above 25mm, beam quality M², divergence and other parameters. Adding accessories meets future requirements and maximizes use of one camera for different measurements without repeated camera purchases.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Detector [WinCamD-QD; S-WCD-QD-1550 / S-WCD-QD-2000; Specific Variants Follow the Model Identifiers in the Original Value] | Quantum-Dot Detector |
| Pixel Size [WinCamD-QD; S-WCD-QD-1550 / S-WCD-QD-2000; Specific Variants Follow the Model Identifiers in the Original Value] | 15 um × 15 um |
| Minimum Measurable Spot [WinCamD-QD; S-WCD-QD-1550 / S-WCD-QD-2000; Specific Variants Follow the Model Identifiers in the Original Value] | ~150 um |
| Signal-to-Noise Ratio SNR [WinCamD-QD; S-WCD-QD-1550 / S-WCD-QD-2000; Specific Variants Follow the Model Identifiers in the Original Value] | ≥2100:1 (33 dB optical / 66 dB electrical) |
| Digital-to-Analog Conversion [WinCamD-QD; S-WCD-QD-1550 / S-WCD-QD-2000; Specific Variants Follow the Model Identifiers in the Original Value] | 14位 |
| Shutter Type [WinCamD-QD; S-WCD-QD-1550 / S-WCD-QD-2000; Specific Variants Follow the Model Identifiers in the Original Value] | Global Shutter |
| Measurable Laser Types [WinCamD-QD; S-WCD-QD-1550 / S-WCD-QD-2000; Specific Variants Follow the Model Identifiers in the Original Value] | Measures both continuous and pulsed light |
| Dimensions [WinCamD-QD; S-WCD-QD-1550 / S-WCD-QD-2000; Specific Variants Follow the Model Identifiers in the Original Value] | 61 mm × 61 mm × 99 mm |
| Weight [WinCamD-QD; S-WCD-QD-1550 / S-WCD-QD-2000; Specific Variants Follow the Model Identifiers in the Original Value] | 407g |
| Resolution [WinCamD-QD；S-WCD-QD-1550 / S-WCD-QD-2000；Specific Variants Follow the Model Identifiers in the Original Value；model:S-WCD-QD-2000] | 640x512 |
| Effective Detection Area [WinCamD-QD；S-WCD-QD-1550 / S-WCD-QD-2000；Specific Variants Follow the Model Identifiers in the Original Value；model:S-WCD-QD-2000] | 9.5 mm × 7.68 mm |
Applications
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
Beam'R2 Series Slit-Scanning Beam Quality Analyzer Beam Profilers Sinteclaser
Wavelengths [Si Detector]: 190 至 1150 nm Wavelengths [InGaAs Detector]: 650 至 1800 nm Wavelengths [Si + InGaAs Detector]: 190 至 1800 nm
Beam'R2 suits diverse beam analysis. With standard2.5μm slits/larger knife edges,Beam'R2 measures beams down to2μm. Silicon,InGaAs or extended InGaAs let Beam'R2 cover190 nm to2500 nm. Beam'R2 scanning slits offer higher resolution than camera systems.
-
BeamMap2 Collimate Multiplane Slit-Scanning Beam Profiler Beam Profilers Sinteclaser
Wavelengths [Si Detector]: 190 至 1150 nm Wavelengths [InGaAs Detector]: 650 至 1800 nm Wavelengths [Si + InGaAs Detector]: 190 至 1800 nm
BeamMap2 represents a completely different approach to real-time beam profiling. It extends the measurement capabilities of Beam'R2 to multiple locations along the beam path. This real-time scanning-slit system uses pairs of XY slits in multiple Z planes on a rotating disk to simultaneously measure four beam profiles at four different Z positions. BeamMap2's unique design is particularly advantageous for real-time measurement of focal position, M², beam divergence, and pointing. Compared with the standard BeamMap2, BeamMap2 Collimate is specially designed with plane spacing significantly increased by 5 mm for well-collimated beams.
-
BeamMap2 Series Slit-Scanning Beam Quality Analyzer Beam Profilers Sinteclaser
Wavelengths [Si Detector]: 190 至 1150 nm Wavelengths [InGaAs Detector]: 650 至 1800 nm Wavelengths [Si + InGaAs Detector]: 190 至 1800 nm
BeamMap2 represents a completely different approach to real-time beam profiling. It extends the measurement capabilities of Beam'R2 to multiple locations along the beam path. This real-time scanning-slit system uses pairs of XY slits in multiple Z planes on a rotating disk to simultaneously measure four beam profiles at four different Z positions. BeamMap2's unique design is particularly advantageous for real-time measurement of focal position, M², beam divergence, and pointing.
-
TaperCamD-LCM Series Large-Aperture Beam Profiler Beam Profilers Sinteclaser
Response Wavelength: 355 - 1150 nm Photosensitive Area: 25 mm × 25 mm Resolution: 2048 x 2048
TaperCamD-LCM provides a 25 x 25 mm active area,4.2 Mpixels,12.5 x 12.5μm effective pixels, optical/electronic global-shutter triggering, and 2500:1 SNR, with the largest active sensor area and USB power. The source describes WinCamD-LCM as a large-beam profiler combining high SNR and a global shutter with a high-quality fiber taper. TaperCamD-LCM offers compact, easy measurement of varied large CW or pulsed lasers. TaperCam profilers suit CW/pulsed beam profiling, field laser-system servicing, optical components, instrument calibration, beam-drift monitoring/logging, OEM integration, and beam-processing quality control.
-
Beam Profiler Beam Profilers Spectra-line
Beam width parameters: FMHM,1/e2,4σ,statistical moments up to 4th for X and Y directions independently Fitting: Gauss ande Lorentz fit for X and Y direction independently; Returning destribution parameters Beam geometry: Astigmatic ande elliptical
Beam profilers use CCD or CMOS imaging with image-processing software to analyze spot characteristics and intensity distributions. Puxian Technology's Huaris series offers cost-effective profiling in a compact metal housing with a universal C-Mount for lenses and filters. An optional 7-inch android tablet, preinstalled and preconfigured for immediate use, enables portability. The laser cloud service supports remote access, data acquisition, and analysis.
Related Articles
Ytterbium‑doped fiber serves as the core energy‑conversion component inside a fiber laser. Pump light emitted by laser diodes is coupled into the gain fiber, and energy is transferred to signal laser beams via ytterbium ion energy‑level transition for power amplification. Two dominant pump wavelengths, 915 nm and 976 nm, have been widely adopted over decades. With the rapid progress of pump chip and wavelength‑locking technology, 976 nm edge‑emitting laser (EEL) pumps have gradually surpassed the 915 nm route and become the new industry mainstream. Shenzhen Lemon Photonics Technology Co., Ltd keeps developing high‑performance pump chips for fiber laser manufacturers.
The 850 nm and 940 nm infrared narrow‑bandpass filters launched by Innovation Photoelectric are core optical components specially designed for day‑and‑night security cameras. They effectively eliminate image interference during visible‑light and infrared‑illumination switching, delivering stable round‑the‑clock monitoring performance.
For low-frequency RF, electromagnetic testing and power combining systems, conventional resistive power dividers bring high insertion loss, while standard directional couplers cannot provide equal-amplitude signals with 180° phase shift. They fail differential circuits, balanced amplifiers and signal cancellation systems.
As fundamental refractive optical components, plano‑convex spherical lenses consist of one convex spherical surface and one flat surface.
Loading...
Name
Phone
Organization
Use Case
Database Platform