40G PIN-TIA Photodetector U2T (Finisar) MPRV1331A MPRV1331A-GM-LP
The Photodetector with fiber optic tails input, rate 43Gbps,PIN-TIA detector,typical sensitivity -10dBm@1550nm,-7dBm@1310nm;2100V/W conversion gain,output limit,difference swing maximum to 700mV,can be used for microwave photon communication;differential AC coupling radio frequency signal output,double GPPO port. The MPRV1331A is a differential photo-receiver module with very high differential conversion gain and high digital bandwidth of 43Gbps. The photo-receiver module MPRV1331A contains a waveguide-integrated PIN-photodiode (PD) and a trans-impedance amplifier (TIA) with limiting output buffer. An integrated feedback loop optimizes the performance in the frequency and/or time domain with respect to different optical input power.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Operating Case Temperature T_Case [Environmental Conditions] | min:0 °C；typical:35 °C；max:75 °C |
| Relative Humidity RH [Environmental Conditions / non condensing] | min:5 %；max:85 % |
| Storage Temperature T_sto [Environmental Conditions] | min:-40 °C；max:85 °C |
| Amplifier Bias Voltage V_CC [Operating Conditions] | min:3.135 V；typical:3.3 V；max:3.465 V |
| Wavelength Range λ_1 [Operating Conditions / λ_1] | min:1300 nm；typical:1310 nm；max:1330 nm |
| Wavelength Range λ_2 [Operating Conditions / λ_2] | min:1530 nm；typical:1550 nm；max:1570 nm |
| Photodiode Bias Voltage V_PD [Operating Conditions] | min:3.135 V；typical:3.3 V；max:3.465 V |
| Differential Conversion Gain CG [Typical optical and electrical specifications refer to typical operation conditions. / @λ_2 / Measurements performed single ended] | typical:2100 V/W |
| Differential Conversion Gain CG [Typical optical and electrical specifications refer to typical operation conditions. / @λ_1 / Measurements performed single ended] | typical:1600 V/W |
| Photodiode DC Responsivity R [Typical optical and electrical specifications refer to typical operation conditions. / @λ_2 / optimum polarization] | min:0.4 A/W；typical:0.6 A/W |
| Photodiode DC Responsivity R [Typical optical and electrical specifications refer to typical operation conditions. / @λ_1 / optimum polarization] | min:0.34 A/W；typical:0.45 A/W |
| Photodiode Dark Current I_dark [Typical optical and electrical specifications refer to typical operation conditions.] | typical:10 nA；max:1000 nA |
| Polarization Dependent Loss PDL [Typical optical and electrical specifications refer to typical operation conditions.] | typical:0.3 dB；max:0.9 dB |
| Optical Return Loss ORL [Typical optical and electrical specifications refer to typical operation conditions.] | min:27 dB；typical:30 dB |
| 3dB Cut-off Frequency f_3dB [Typical optical and electrical specifications refer to typical operation conditions. / P_opt=-3dBm] | typical:31 GHz |
| Low Frequency cut off f_3dB_L [Typical optical and electrical specifications refer to typical operation conditions.] | max:100 kHz |
| Output Reflection Coefficient S_22 [Typical optical and electrical specifications refer to typical operation conditions. / 0.5-15GHz] | typical:-17 dB；max:-10 dB |
| Output Reflection Coefficient S_22 [Typical optical and electrical specifications refer to typical operation conditions. / 15-50GHz] | typical:-5 dB；max:-2 dB |
| Differential Output Voltage Swing V_out_diff [Typical optical and electrical specifications refer to typical operation conditions. / P_opt≥0dBm] | typical:500 mV；max:700 mV |
| Sensitivity@1550nm P_sense [Typical optical and electrical specifications refer to typical operation conditions. / Evaluated from BER measurement at40Gb/s(BER≤10⁻¹², PRBS2³¹-1,1550nm, back to back)；@1550nm] | typical:-10 dBm；max:-8 dBm |
| Sensitivity@1550nm | max:-9 dBm |
| Sensitivity@1310nm P_sense [Typical optical and electrical specifications refer to typical operation conditions.；@1310nm] | typical:-7 dBm |
| Overload P_over [Typical optical and electrical specifications refer to typical operation conditions. / Evaluated from BER measurement at40Gb/s(BER≤10⁻¹², PRBS2³¹-1,1550nm, back to back)] | min:4 dBm；typical:6 dBm |
| Power Consumption P_con [Typical optical and electrical specifications refer to typical operation conditions. / V_CC=max] | typical:0.4 W；max:0.55 W |
Applications
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
Fiber-Optic Transceiver LF-121S-25KM
Transmitters and Receivers
Lifo-fj
Fiber interface: SC Single-Mode Dual-Fiber Fiber wavelength: 1310nm Optical fiber Rate: 100M
-
Fiber-Optic Transceiver LF-211S-20KM A
Transmitters and Receivers
Lifo-fj
Fiber interface: SC Single-Mode Single-Fiber Fiber wavelength [Transmit]: 1310nm Fiber wavelength [Reception]: 1550nm
-
1.25G~10G 1550nm Coaxial Laser Assembly OLD-5-X-X-X-X-X-X-XX-X-X-XX
Transmitters and Receivers
O-send
Absolute Maximum Ratings - Storage Temperature: -40~+85°C Absolute Maximum Ratings - Operating temperature: -20°C~+70°C Absolute Maximum Ratings -LD Forward Current: 120mA
For test/measurement and OTDR;1550nm with built-in monitor PD.
-
1000BASE SFP SR(850nm 550M) OSFP-108505
Transmitters and Receivers
O-send
Emission wavelength: 850nm Specification: 550m
This enhanced SFP transceiver includes DDM and meets Ethernet requirements for 1.25Gbps communications. Alarms/warnings follow SFF-8472 MSA version 10.4 through I2C. It supports 1.25G at 850nm over up to 550m of multimode fiber. Subwatt consumption and excellent EMI enable dense ports. RoHS compliance and industry safety design/testing include Class I laser conformity with US FDA/CDRH and IEC-60825. The SFP SR connects to a standard 20-contact SFP connector for hot swapping, allowing maintenance/configuration without host power removal. Transmit/receive DATA interfaces are internally AC-coupled. LV-TTL transmitter-disable input and LOS output are provided. A pull-ring latch enables easy release and meets SFP MSA. A +3.3V supply supports case temperatures 0°C to +70°C commercial or -40°C to +85°C industrial. A metal housing shields EMI.
-
1000Base SFP BIDI Module(1310nm/1550nm 20Km) OSFP-1131520
Transmitters and Receivers
O-send
Emission wavelength: 1310nm/1550nm Specification: 20KM
This enhanced small-form-factor pluggable (SFP) fiber transceiver includes digital diagnostic monitoring (DDM). It complies with Ethernet standards and is ideal for 1.25Gbps data communications. DDM alarms and warnings are integrated through an I2C serial interface under the SFF-8472 multisource agreement (MSA), version 10.4. The transceiver supports 155Mbps to 1.25Gbps and provides a solution for 1310nm transmission over up to 20 kilometers of single-mode fiber. Subwatt consumption and excellent EMI performance support high port density. It is RoHS compliant and designed and tested to industry safety standards, and is a Class I laser product under US FDA/CDRH and international IEC-60825 standards. The SFP LR connects to a standard 20-contact SFP connector for hot swapping, allowing configuration changes or maintenance by replacing the transceiver without switching off the host. Transmitter and receiver DATA interfaces are internally AC-coupled. An LV-TTL transmitter-disable input and loss-of-signal (LOS) output are provided. A bail latch permits easy module removal and complies with the SFP MSA. A single +3.3V supply powers operation at case temperatures of 0°C to +70°C commercially or -40°C to +85°C industrially. The metal case protects against electromagnetic interference.
Related Articles
icrolight is a high-tech enterprise specializing in the R&D, manufacturing and sales of active and passive photonic devices for microwave photonics, LiDAR ranging, gas sensing, fiber optics and photomedicine.
Against the evolving demands for military‑grade hardware, rail transit equipment and heavy‑duty machinery that run under high‑shock vibrating conditions, anti‑loose connectors serve as indispensable hardware for stable power delivery and high‑speed signal transmission.
For low-frequency RF, electromagnetic testing and power combining systems, conventional resistive power dividers bring high insertion loss, while standard directional couplers cannot provide equal-amplitude signals with 180° phase shift. They fail differential circuits, balanced amplifiers and signal cancellation systems.
For pulsed laser and full-spectrum optical testing, photodiodes and thermopiles have inherent drawbacks. Photodiodes show weak response in infrared band, while thermopiles feature slow response and cannot capture nanosecond narrow pulses.
Loading...
Name
Phone
Organization
Use Case
Database Platform