Flatbed Printer 60020UV Area Light Source LP-SP600202W0-BA
UV60020 printing area source: UV flatbed printers mainly print on rigid materials such as wood boards, cardboard and rubber tubes. Used overseas for many years, they offer a lower-cost alternative to short-run screen printing, especially for large-format images where conventional screen printing is expensive. The UV60020 curing source is an efficient, energy-saving, environmentally friendly and long-life UV unit using imported 380-410 LED chips, providing irradiance of 2W per square centimeter. It has 2 irradiation heads with an area of 600×20(MM) and optimum irradiation height of 3MM-10MM.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Wavelength Range | 380--410(NM) |
| Irradiance | 2W/cm^2 |
| Effective Irradiation Area | 600*20(MM) |
| Recommended Irradiation Height | 3-10(MM) |
| Cooling method | Forced Fan Cooling |
| Irradiation Head Dimensions | 620*130*173(MM) |
| Irradiation Head Weight | 6KG |
| Control Method | Switch-Signal Control/High-Low-Level Control |
| Input Power supply | 110V,220V/50HZ |
| Power consumption | 1500W/Irradiation Head |
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
40x50 Water-Cooled Inkjet Coding Area Light Source LP-UV-4050
Lighting Solutions
Szlamplic
UV Wavelength: 395-405nm Irradiation Area: 40mm*50mm Irradiation Height: 5-10mm
-
PCB Curing Collimated 600*75 Area-Source Photocuring System
Lighting Solutions
Szlamplic
Ambient Temperature: 0℃--40℃ Ambient Humidity: 20%--80% Input Power Supply: 220VAC
The PCB collimated-curing 600*75 area source uses LED chips instead of mercury, halogen or electrodeless lamps. It provides a pure single wavelength, high optical power, strong collimation, balanced illumination uniformity, environmental friendliness and energy savings.
-
1.0μm Point Light Source
Lighting Solutions
Dlphoton
Wavelength Range: 1030-1080 nm Optical Wave Mode: Single Transverse Mode, Continuous Wave Output Power: Max ：200 mW
The 1.0μm point source is a single-mode continuous-wave fiber laser. A Fabry-Pérot cavity and single-clad fiber pumping provide high-performance output up to 200mW with nearly diffraction-limited beam quality, supporting research, experimental teaching and device testing and measurement.
-
1.5μm Point Light Source
Lighting Solutions
Dlphoton
Wavelength Range: Min ：1530 nm； Typical ：1550 nm； Max ：1560 nm Optical Wave Mode: Single Transverse Mode, Continuous Wave Output Power: 25 mW
The 1.5 μm laser point source is a miniature device operating in the infrared eye-safe band with excellent optical performance. Eye safety, high peak power, miniature packaging and environmental stability make it ideal for lidar, quantum technology and precision medicine.
-
2.0μm Point Light Source
Lighting Solutions
Dlphoton
Center wavelength: 1950 nm Optical Wave Mode: Single Transverse Mode, Continuous Wave Output Power: Typical ：25 mW
The 2.0 μm laser point source is a miniature device for precise spatial positioning, eye safety and strong environmental adaptability. Eye safety, micrometer-level spot positioning, high peak power, automotive-grade robustness and multiband customization make it key to next-generation LiDAR, precision medicine and industrial processing.
Related Articles
As a core precision optical component for wavelength screening, frequency locking and spectral demodulation, optical etalons are widely used in high-end scientific research and precision laser equipment.
As a vital emerging sector of modern three-dimensional spatial economy, the low-altitude economy has become a new global growth driver. It covers a wide range of commercial scenarios, including UAV navigation and obstacle avoidance, precise airspace management, aerial mapping, low-altitude logistics distribution, security monitoring and emergency disaster rescue. Nevertheless, frequent extreme weather, complex terrain obstacles and increasingly dense low-altitude flight activities pose severe challenges to the safety and stability of low-altitude aircraft operations.
Laser pump sources are the core energy input component of solid-state lasers and laser amplifiers, and their performance directly determines the output power, beam quality and service life of the entire laser system. In scenarios such as industrial processing, scientific research experiments and high-end equipment, improper pump source selection will not only result in substandard system performance, but also bring a series of problems such as rapid device degradation and high operation and maintenance costs. This article sorts out the core selection logic and key pitfalls of pump source procurement, and provides selection references based on mature, mass-produced high-reliability products to help purchasers efficiently screen suitable products.
Shandong Haucore Optoelectronics Co., Ltd. introduces the HGLD‑792‑COS‑D‑10WB semiconductor laser within its COS series. Delivering an output power of 10 W at a central wavelength of 792 nm, this device adopts gold‑tin bonding COS packaging. Featuring high reliability and long service life, it serves as a preferred pump source for solid‑state lasers and is widely deployed in industrial processing, laser display, medical & aesthetic treatment, scientific research and other fields.
Loading...
Name
Phone
Organization
Use Case
Database Platform