0-30kW Water-Cooled Light Collector Dospectrum DP-45mm-10KW-P
Save to Favorites
Specifications
| Parameter | Value |
|---|---|
| Absorption Range | 0.8-25 μm |
| Max Power | 10 kW |
| Absorber Type | PT |
| Detection Aperture | 45 mm |
| Max Average Power Density | 3kW/cm² |
| Incident Beam Irradiation Requirements | To Prevent Damage to the Collector, Observe These Incident-Beam Position and Tilt Requirements: ① Center the Beam on the Probe Cone, with Position Offset No Greater Than 1/4 of the Spot Diameter; ② Maximum Incident-Beam Tilt ±5 Degrees |
| Specifications | Φ146×70 |
| Cooling method | Water cooling |
| Cooling water Flow rate | 8-10 L/min |
Datasheet
Supplier Information
Related Products
-
XNY-T6 Rotating Sensor Probe (Six Probes)
Metrology Accessories
Cdxnyzk
The rotating sensor head is used in demanding coating processes involving very thick films and multiple materials. Advantages: 1. Six crystals are placed in a thermally shielded, water-cooled tray to maintain excellent performance at ambient temperatures up to 300°C. 2. Pneumatic indexing of six crystal positions uses purely mechanical positioning with good repeatability and no cumulative error, with an in-position detection switch signal. 3. Easy installation, with main-body size Φ72 and customizable vacuum interface and insertion length. 4. Imported integrated MICRODOT TO BNC connector. 5. Replacing six crystals at once improves productivity and supports deposition of thicker films. 6. Rugged, durable construction with a complete 304 steel cylindrical housing.
-
Probe Flange
Metrology Accessories
Cdxnyzk
-
0-30kW Water-Cooled Light Collector Dospectrum DP-55mm-15KW-P
Metrology Accessories
Dospectrum
Absorption Range: 0.8-25 μm Max Power: 15 kW Absorber Type: PT
-
0-30kW Water-Cooled Light Collector Dospectrum DP-80mm-30KW-P
Metrology Accessories
Dospectrum
Absorption Range: 0.8-25 μm Max Power: 30 kW Absorber Type: PT
Related Articles
icrolight is a high-tech enterprise specializing in the R&D, manufacturing and sales of active and passive photonic devices for microwave photonics, LiDAR ranging, gas sensing, fiber optics and photomedicine.
Against the evolving demands for military‑grade hardware, rail transit equipment and heavy‑duty machinery that run under high‑shock vibrating conditions, anti‑loose connectors serve as indispensable hardware for stable power delivery and high‑speed signal transmission.
For low-frequency RF, electromagnetic testing and power combining systems, conventional resistive power dividers bring high insertion loss, while standard directional couplers cannot provide equal-amplitude signals with 180° phase shift. They fail differential circuits, balanced amplifiers and signal cancellation systems.
For pulsed laser and full-spectrum optical testing, photodiodes and thermopiles have inherent drawbacks. Photodiodes show weak response in infrared band, while thermopiles feature slow response and cannot capture nanosecond narrow pulses.
Loading...
Name
Phone
Organization
Use Case
Database Platform