LMTS-15G Motorized Focusing Stage OSMC-1U
The LMTS-15G motorized focusing stage provides precise vertical positioning for optical focusing, vertical sample positioning and precision alignment.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Drive Voltage | DC 12V-24V |
| Drive Current [Max] | 2A Max |
| Drive Type | 16 bit PWM Control |
| Control Algorithm | PID |
| High-Resolution Stepping [For a Two-Phase Motor with 1.8-Degree Step Angle] | For a two-phase motor with 1.8-degree step angle; 51200 microsteps per turn |
| Microstep Subdivision Factor [Software Adjustment] | 16X-256X(Software Adjustment) |
| Encoder Feedback Bandwidth | 500 Hz |
| Position Counter | 32 bit |
| Operation Mode | Position, Speed, Motion Cycle |
| Acceleration/Deceleration Method | S-Shaped |
| External trigger Control | Frequency Identification |
| Power-Off Memory | Yes, holds position |
| Communication Protocol | Open ASCII Commands |
| Supports System | All Platforms |
| Secondary Development SDK | Protocol Documentation |
| Motor Connector (Dsub26 Type ) Open-Loop Control Is MDR20 Type - Motor Drive Output | Two-Phase DC Type |
| Motor Connector (Dsub26 Type), Open-Loop Control Uses MDR20 Type-Quadrature Encoder (QEP) Input | PID |
| Motor Connector (Dsub26 Type), Open-Loop Control Uses MDR20 Type-Limit-Switch Input | Positive Limit, 0-Position Limit |
| Motor Connector (Dsub26 Type ) Open-Loop Control Is MDR20 Type - Encoder Power Supply | DC 5V |
| Front Panel Controls-Joystick | Hall-Effect Stepless Speed Control |
| Input Power Supply Requirements - Voltage | DC12V-24V |
| Input Power Supply Requirements - Max Output Current | 2A Max |
| Enclosure dimensions | 76.0 mm × 74.2 mm × 47.0 mm |
| Weight | 183.5g |
| Specifications | 76.0 mm × 74.2 mm × 47.0 mm |
Key Features
Datasheet
Supplier Information
Related Products
-
Dual-Channel Screen Splitter
Microscope Accessories
Kayjaopt
One camera simultaneously records images at two different optical wavelengths/polarization states.
-
Four-Color Imaging Module
Microscope Accessories
Kayjaopt
This highly integrated modular fluorescence microscopy module provides rapid imaging. Up to 4 LED wavelengths are modulated and collimated, and an integrated imaging path enables excitation and imaging within one module. Different detectors connect through C/F interfaces, and Olympus objectives are supported. With a controller, it provides CW or millisecond-pulsed output, continuously adjustable intensity, computer remote control and support for customer development.
-
Laser Autofocus Module
Microscope Accessories
Kayjaopt
Laser Wavelength: 650/850 nm Product Dimensions (Length * Width * Height): 205 mm × 146.5 mm × 54 mm Output Power: <0.5mW
The autofocus module supports microscope imaging from 4X to 100X for microstructure inspection, semiconductor inspection, fluorescence microscopy and panoramic biological tissue imaging. A laser marks the specified focal plane. During long experiments or large-field stitched imaging, it prevents focusing errors from temperature differences, vibration, uneven surfaces or slight equipment tilt, ensuring good experimental images.
-
High-Speed Laser-Scanning Photobleaching Module FRAP
Microscope Accessories
Kayjaopt
Scanning Range: Matches the Standard Full Field of View of the Microscope Small-Angle Step Response Time: ＜250μs Galvanometer Minimum Angular Step: 0.004°
The high-speed laser-scanning FRAP photobleaching module uses galvanometers for microscopy, with monochromatic/multicolor lasers via single-mode PM fiber input. Multiple ROIs of different sizes, positions and shapes can be precisely targeted simultaneously for bleaching, localized cell illumination and programmed paths. Applications include photobleaching, photoactivation/photoconversion in biology/materials. Highly integrated, easy to install and compatible with Olympus, Nikon and other commercial microscopes, it studies intracellular protein dynamics economically without point-scanning confocal equipment. Scanning: Precision high-speed XY motors with highly reflective mirrors focus the beam and trace preset vectors, such as rapid spots or area fills, delivering high energy to selected ROIs for immediate bleaching/activation. TTL control enables microsecond switching and dynamic power, limiting illumination to ROIs and reducing off-target phototoxicity. Kayja's dedicated software integrates path planning, pattern drawing, power modulation and camera acquisition. Patterns include points, lines, serpentine fills and custom closed curves. Laser switching synchronizes with scanning and stays off otherwise. Millisecond external hardware triggers accurately send/receive TTL for zero-delay synchronization with sCMOS shutters. Optical/mechanical expansion connects to upright/inverted microscopes through dedicated adapters; fine lens adjustment calibrates wavelength-dependent chromatic aberration and sample focal planes.
-
High-Speed Laser-Scanning Photobleaching Module FRAP
Microscope Accessories
Kayjaopt
Scanning Range: Matches the Standard Full Field of View of the Microscope Small-Angle Step Response Time: ＜250μs Galvanometer Minimum Angular Step: 0.004°
The high-speed laser-scanning FRAP photobleaching module uses galvanometers for microscopy, with monochromatic/multicolor lasers via single-mode PM fiber input. Multiple ROIs of different sizes, positions and shapes can be precisely targeted simultaneously for bleaching, localized cell illumination and programmed paths. Applications include photobleaching, photoactivation/photoconversion in biology/materials. Highly integrated, easy to install and compatible with Olympus, Nikon and other commercial microscopes, it studies intracellular protein dynamics economically without point-scanning confocal equipment. Scanning: Precision high-speed XY motors with highly reflective mirrors focus the beam and trace preset vectors, such as rapid spots or area fills, delivering high energy to selected ROIs for immediate bleaching/activation. TTL control enables microsecond switching and dynamic power, limiting illumination to ROIs and reducing off-target phototoxicity. Kayja's dedicated software integrates path planning, pattern drawing, power modulation and camera acquisition. Patterns include points, lines, serpentine fills and custom closed curves. Laser switching synchronizes with scanning and stays off otherwise. Millisecond external hardware triggers accurately send/receive TTL for zero-delay synchronization with sCMOS shutters. Optical/mechanical expansion connects to upright/inverted microscopes through dedicated adapters; fine lens adjustment calibrates wavelength-dependent chromatic aberration and sample focal planes.
Related Articles
Electro-optic deflectors (EODs) are optical devices used to steer or deflect light beams by applying an electric field to a specialized optical crystal. Unlike mechanical beam steering systems that rely on moving mirrors, electro-optic deflectors enable high-speed, non-mechanical beam control with exceptional precision and responsiveness. They are widely used in laser scanning, optical communications, microscopy, laser printing, spectroscopy, and scientific research, where rapid and accurate laser beam positioning is essential.
The 850 nm and 940 nm infrared narrow‑bandpass filters launched by Innovation Photoelectric are core optical components specially designed for day‑and‑night security cameras. They effectively eliminate image interference during visible‑light and infrared‑illumination switching, delivering stable round‑the‑clock monitoring performance.
Within cutting‑edge ultrafast photonics research, asynchronous optical sampling (ASOPS) and synchronous sampling serve as fundamental technologies for terahertz excitation detection, coherent Raman imaging and other time‑resolved spectroscopy experiments.
Shanghai Connet Laser Technology Co., Ltd. focuses on technological innovation, delivering cutting-edge photonic products & solutions for industrial lasers, LiDAR, fiber optic sensing, coherent telecom, cold atom physics and precision spectroscopy research & mass manufacturing.
Loading...
Name
Phone
Organization
Use Case
Database Platform