ARHT high-speed rotary stage (ARHT-200)
Save to Favorites
Specifications
| Parameter | Value |
|---|---|
| Table Diameter | 200 mm |
| Maximum Load | 5 kg |
| Rotational Speed | 5500 rpm |
| Acceleration | 1000 rpm/s |
| Positioning Accuracy | ±2 arc sec |
| Repeatability | ±1 arc sec |
| Homing Repeatability | ±1 arc sec |
| Axial Synchronous Error | 200 nm |
| Radial Synchronous Error | 200 nm |
| Static Stability | 0.5 arc sec |
| Minimum step | 0.5 arc sec |
| Resolution | 0.019 arc sec |
| Velocity Uniformity | 0.01 % |
| Following Error | ±0.005 ° |
| Weight | 35 kg |
| Central Vacuum Level | >80 kPa |
| Air Consumption | 60 L/min |
| Air Supply Pressure | 0.5-0.6MPa |
| Failure-free Operating Time | 20000h |
| Supply Voltage | 380VAC |
Applications
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
AS11075-XY Motorized XY Scanning Stage
Motorized Stages
Oeabt
Specifications: 281.0 mm × 252.8 mm × 32.3 mm Total travel: 110mm(X axis)*75mm(Y axis) Max Load: 1kg
The automated, high-precision four-inch two-axis stage provides a large 110*75mm XY travel range for microscopy, industrial inspection and precision processing.
-
AS11075-XY Motorized XY Scanning Stage OM-4X
Motorized Stages
Oeabt
Specifications: Four-Axis Motion Controller/Driver
The automated, high-precision four-inch two-axis stage provides a large 110*75mm XY travel range for microscopy, industrial inspection and precision processing.
-
AS11075-XY Motorized XY Scanning Stage OM-4CP
Motorized Stages
Oeabt
Specifications: Four-Axis Motion-System Hand Controller
The automated, high-precision four-inch two-axis stage provides a large 110*75mm XY travel range for microscopy, industrial inspection and precision processing.
-
AS11075-XY Motorized XY Scanning Stage OSMC-1U
Motorized Stages
Oeabt
Specifications: 76.0 mm × 74.2 mm × 47.0 mm Weight: 183.5g
The automated, high-precision four-inch two-axis stage provides a large 110*75mm XY travel range for microscopy, industrial inspection and precision processing.
-
LMTS Series Stepper-Motor Translation Stage LMTS-D28
Motorized Stages
Oeabt
Specifications: 253.0 mm × 70.0 mm × 24.0 mm Travel: 28mm Actuator Type: 28BYG-B Motor with Shaft Outputs at Both Ends
LMTS-series motorized linear translation stages provide 28mm travel and are optimized for moderate loads and high-resolution measurement and inspection. Special microstepping design enables smaller, smoother low-speed movements with less vibration noise than DC servomotors.
Related Articles
icrolight is a high-tech enterprise specializing in the R&D, manufacturing and sales of active and passive photonic devices for microwave photonics, LiDAR ranging, gas sensing, fiber optics and photomedicine.
Against the evolving demands for military‑grade hardware, rail transit equipment and heavy‑duty machinery that run under high‑shock vibrating conditions, anti‑loose connectors serve as indispensable hardware for stable power delivery and high‑speed signal transmission.
For low-frequency RF, electromagnetic testing and power combining systems, conventional resistive power dividers bring high insertion loss, while standard directional couplers cannot provide equal-amplitude signals with 180° phase shift. They fail differential circuits, balanced amplifiers and signal cancellation systems.
For pulsed laser and full-spectrum optical testing, photodiodes and thermopiles have inherent drawbacks. Photodiodes show weak response in infrared band, while thermopiles feature slow response and cannot capture nanosecond narrow pulses.
Loading...
Name
Phone
Organization
Use Case
Database Platform