AS11075-XY Motorized XY Scanning Stage
The automated, high-precision four-inch two-axis stage provides a large 110*75mm XY travel range for microscopy, industrial inspection and precision processing.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Specifications | 281.0 mm × 252.8 mm × 32.3 mm |
| Total travel | 110mm(X axis)*75mm(Y axis) |
| Max Load | 1kg |
| Tabletop dimensions | 260.0 mm × 172.7 mm |
| Lead screw Type | Ø6mm Threaded Leadscrew, Lead 2mm |
| Guide-Rail Type | Dual Linear Guide Rails |
| Maximum Speed | 6.25mm/s |
| Minimum Speed | 0.78mm/s |
| Handwheel Minimum Resolution | ≤2.5μm |
| Repeatability | ±5μm |
| Axial Error | 0.02mm |
| Reversal error | 0.01mm |
| Motor Type | Direct-Coupled Stepper Motor, 28BYG Stepper Motor |
| Sensor Type | Slot-type photoelectric sensor (NPN normally open, active high) |
| Operating voltage | DC 12V |
| Operating current | 2A |
| Accessories | Includes the SHX-A rectangular sample insert, compatible with Petri dishes of Ø30~60mm and microscope slides of 25~26.5mm width. |
| Recommended Driver / Controller | O’motion Four-Axis Motion Control System (OM-4X Controller/Driver and OM-4CP Hand Controller), OSMC-1U Single-Axis Stepper Controller*2 |
| Lead screw Type - Lead | 2mm |
| Accessories - Compatible dimensions | Petri dish :Ø30~60mm; Microscope slide Width ：25~26.5mm |
Key Features
Datasheet
Supplier Information
Related Products
-
AS11075-XY Motorized XY Scanning Stage OM-4X
Motorized Stages
Oeabt
Specifications: Four-Axis Motion Controller/Driver
The automated, high-precision four-inch two-axis stage provides a large 110*75mm XY travel range for microscopy, industrial inspection and precision processing.
-
AS11075-XY Motorized XY Scanning Stage OM-4CP
Motorized Stages
Oeabt
Specifications: Four-Axis Motion-System Hand Controller
The automated, high-precision four-inch two-axis stage provides a large 110*75mm XY travel range for microscopy, industrial inspection and precision processing.
-
AS11075-XY Motorized XY Scanning Stage OSMC-1U
Motorized Stages
Oeabt
Specifications: 76.0 mm × 74.2 mm × 47.0 mm Weight: 183.5g
The automated, high-precision four-inch two-axis stage provides a large 110*75mm XY travel range for microscopy, industrial inspection and precision processing.
-
LMTS Series Stepper-Motor Translation Stage LMTS-D28
Motorized Stages
Oeabt
Specifications: 253.0 mm × 70.0 mm × 24.0 mm Travel: 28mm Actuator Type: 28BYG-B Motor with Shaft Outputs at Both Ends
LMTS-series motorized linear translation stages provide 28mm travel and are optimized for moderate loads and high-resolution measurement and inspection. Special microstepping design enables smaller, smoother low-speed movements with less vibration noise than DC servomotors.
Related Articles
Recently, our R&D crew carried‑out performance tests on domestically‑made third‑party LiDAR hardware. The original built‑in sensor chip was replaced by Optics‑Valley Quantum’s new‑generation D‑XXLA200‑02 chip.
Founded in 2019, Jilin JC Ultrafast Equipment Co., Ltd. is a high-tech enterprise incubated by the Ultrafast Optoelectronics Center of Jilin University. Our R&D team owns 15 years of profound experience in femtosecond laser micro-nano fabrication.
An infrared transmitter (IR transmitter) is a basic electronic component that sends invisible infrared light signals for short-range wireless control. It is widely used in daily electronics, smart home devices, and industrial equipment due to its low cost, low power consumption, and stable performance.
As a top‑tier supplier of tunable laser chips, Shandong Zhongxin Optoelectronics Technology Company has newly launched the world’s first budget‑friendly fiber‑Bragg‑grating (FBG) demodulator and scanning module.
Loading...
Name
Phone
Organization
Use Case
Database Platform