Prism
Widely used in optical systems such as endoscopes and surgical microscopes, it serves to fold the optical path or split light. In addition to conventional 90° and 45° steering prisms, we also mass-produce prisms with different viewing angles such as 12°, 25°, 30°, and 70°. Besides the precision control of angle and dimensions, coating is also a key factor affecting the final imaging effect, which is also one of our advantages.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Dimensions [Processing Capability] | 1.5~20 mm |
| Dimensions [Inspection Equipment] | Digital Micrometer, Image Measuring Instrument |
| Dimensional Tolerance [Processing Capability] | ±0.005 mm |
| Dimensional Tolerance [Inspection Equipment] | Digital Micrometer or Image Measuring Instrument |
| Prism Angle Error [Processing Capability] | 30 arcsec |
| Prism Angle Error [Inspection Equipment] | Goniometer |
| Fan Local Error [Processing Capability] | 0.1λ per inch |
| Fan Local Error [Inspection Equipment] | Interferometer |
| Surface Defects [Processing Capability] | 2*0.016 |
| Surface Defects [Inspection Equipment] | Microscope |
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
Pentaprism
Prisms
Sunday-optics
Material: BK7, UV fused silica, sapphire, ZnSe, Caf2, Si, Ge, etc. Dimensions: 3mm-380mm Dimensional tolerance [Customer requirements]: +/-0.02mm or Customer requirements
Pentaprisms are widely used in laser levels, imaging, precision systems and optics. Their 90° deviation is independent of prism orientation, making them especially important where orientation cannot be precisely controlled. We manufacture high-precision pentaprisms with customer-specified coatings.
-
Littrow Prism
Prisms
Sunday-optics
Material: BK7, UV fused silica, sapphire, ZnSe, Caf2, Si, Ge, etc. Dimensions: 0.5mm-300mm Dimensional tolerance [Customer requirements]: +/-0.02mm or Customer requirements
A Littrow prism is usually a 30°/60°/90° prism with a reflective coating on its hypotenuse. A coated Littrow dispersion prism deflects the line of sight by 60°. An uncoated Littrow dispersion prism disperses light into its component spectrum.
-
Half-Pentaprism
Prisms
Sunday-optics
Material: BK7, UV fused silica, sapphire, ZnSe, Caf2, Si, Ge, etc. Dimensions: 3mm-380mm Dimensional tolerance [Customer requirements]: +/-0.02mm or Customer requirements
Sunday-optics manufactures half-pentaprisms to customer dimensions/drawings.
-
Anamorphic Prism
Prisms
Sunday-optics
Material: N-SF11 Dimensional tolerance: +/-0.05mm CA: >80%
Anamorphic prism pairs convert elliptical laser-diode beams into nearly circular beams. Operation near Brewster's angle and angle-specific antireflection coatings tailored to SF11 glass achieve 95% average throughput.
-
Solar Energy Prism
Prisms
Sunday-optics
Material [or Customer requirements 。]: BK7, UV Fused Silica or Customer-Specified Material Dimensions: 0.5mm-300mm Dimensional tolerance [Customer requirements]: +/-0.1mm or Customer requirements
The CPV solar prism collects sunlight for solar concentrators, concentrated photovoltaic (CPV) systems and solar power generation. It is a principal optical component for converting solar energy into electricity.
Related Articles
As a core precision optical component for wavelength screening, frequency locking and spectral demodulation, optical etalons are widely used in high-end scientific research and precision laser equipment.
As a vital emerging sector of modern three-dimensional spatial economy, the low-altitude economy has become a new global growth driver. It covers a wide range of commercial scenarios, including UAV navigation and obstacle avoidance, precise airspace management, aerial mapping, low-altitude logistics distribution, security monitoring and emergency disaster rescue. Nevertheless, frequent extreme weather, complex terrain obstacles and increasingly dense low-altitude flight activities pose severe challenges to the safety and stability of low-altitude aircraft operations.
Laser pump sources are the core energy input component of solid-state lasers and laser amplifiers, and their performance directly determines the output power, beam quality and service life of the entire laser system. In scenarios such as industrial processing, scientific research experiments and high-end equipment, improper pump source selection will not only result in substandard system performance, but also bring a series of problems such as rapid device degradation and high operation and maintenance costs. This article sorts out the core selection logic and key pitfalls of pump source procurement, and provides selection references based on mature, mass-produced high-reliability products to help purchasers efficiently screen suitable products.
Shandong Haucore Optoelectronics Co., Ltd. introduces the HGLD‑792‑COS‑D‑10WB semiconductor laser within its COS series. Delivering an output power of 10 W at a central wavelength of 792 nm, this device adopts gold‑tin bonding COS packaging. Featuring high reliability and long service life, it serves as a preferred pump source for solid‑state lasers and is widely deployed in industrial processing, laser display, medical & aesthetic treatment, scientific research and other fields.
Loading...
Name
Phone
Organization
Use Case
Database Platform