JW8610 Rotating Polarization State Analyzer
丨 The JW8610 polarization analyzer is designed specifically for measuring the polarization characteristics of free-space collimated light and fiber light sources. It adopts the classic rotating waveplate method to accurately measure the degree of polarization at a rate of 8Hz, and can display the polarization state in real time and intuitively on a Poincare sphere interface. It can also be used with the JW8612 polarization state thermal cycling heater to achieve high-precision analysis of the polarization extinction ratio (PER) of narrowband light through a unique thermally induced polarization change measurement technique.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Wavelength Range | 1270-1650nm |
| SOP accuracy | 0.25 ° |
| DOP accuracy | 1 % |
| PER measurement range | 0-40dB |
| PER Resolution | 0.1 dB |
| Input optical power range | -40~+25 dBm |
| Sampling Rate | 8 hz |
| Interface | FC or free-space collimated light |
| Clear Aperture Dimension | 3 mm |
| Maximum deviation angle of collimated light | 2 ° |
| Chassis dimensions | 235 mm × 104 mm × 300 mm |
Applications
Key Features
Datasheet
Supplier Information
Related Products
-
Optical System for Plastic Film Thickness Measurement UVS3-180-500
Optical Metrology
Jnewtech
Wavelength Range: 180-500nm Grating: 1200line/mm Resolution (FWHM) [MIN FWHM]: 0.2nm (MIN FWHM)
Plastic-film thickness optical system: UV xenon lamp, UV spectrometer and probe. White-light interference uses d = (wave2 - wave1)/deltaWave * K, where wave is wavelength, deltaWave the two-peak separation and K the refractive coefficient. Typical range is 0.5um -100um: approximately 200nm UV for 0.5um films, 500-600nm visible for 10-50um, and 800nm IR for around 80um. Above 100um, vernier calipers are recommended. Transparent films use transmission; opaque films, such as semiconductor etch endpoints, use reflection. A CMOS UV spectrometer and xenon source provide a cost-effective solution, with a JPN detector and USA/Germany hardware. 1. Integrated CMOS/xenon UV system simplifies measurement. 2. A high-performance flashing xenon lamp gives stable UV measurements. 3. Low-cost integration reduces complexity and provides a complete solution.
-
LP1000 Phase Retardation Measurement Instrument
Optical Metrology
Leice
Standard Light Source Wavelength: 633nm（632.8nm） Phase Retardation Measurement Interval: 0°~180° Measurement Repeatability: 0.2°
The LP1000 phase-retardation meter has received a second-class national invention award, and the company participated in drafting the national standard. Traceability, high precision, temperature compensation and multiwavelength conversion support stress and phase testing of waveplates, crystals and other optics. The core P1000 technology received the second-class National Technological Invention Award. We helped draft GB/T 26827-2011, Calibration Method for Waveplate Phase Retardation Measurement Devices. LP1000 is Leice's main traceable birefringence measurement model, intended for precision calibration of internal stress and phase retardation in optical elements. It tests transmissive materials such as waveplates, optical glass, display panels and crystals. A precision translation stage and temperature-compensation module are included, with customized nonstandard scanning solutions available.
-
Beam-Pointing Stabilization System
Optical Metrology
Lumi-universe
Correction Capability [Single mirror, X,Y directions; correction range increases with multiple mirrors.]: Single mirror X,Y directions ± 0.4 mrad (correction range increases with multiple mirrors). Minimum Stride: ≤0.1μrad Direction LockingAccuracy [(@RMSE, Focal Point)]: ≤1urad (@RMSE, Focal Point)
In precision optics, thermal drift and stress relaxation can cause low-frequency beam disturbances and sustained spot drift. A highly sensitive camera detects disturbances in real time, while intelligent control dynamically steers an electrically controlled mirror to maintain a preset direction. Unlike other pointing-lock systems, camera detection with small pixels improves locking accuracy. During locking, users can observe spot shape and monitor beam power and its changes in real time.
-
GMP-F Glass Mask Target
Optical Metrology
Oeabt
Specifications [±0.25]: 75*25*1.0mm（±0.25） Material: Quartz SiO₂, Chromium Coating Weight: 4.9g
Placing different masks, slits and apertures in the optical path at the Fourier plane before the beamsplitter allows pattern changes to be observed on the viewing screen.
-
Laser Linewidth Test System
Optical Metrology
Dlphoton
Donglai Technology's laser linewidth test system uses delayed self-heterodyne interferometry, with an AOM as the interferometer's frequency shifter. The system includes a high-gain optical receiver/photodetector, a low-noise RF amplifier (LNA) and a high-resolution optical spectrum analyzer for measurement. High sensitivity permits measurement and analysis of laser linewidths down to 2kHz.
Related Articles
As a core precision optical component for wavelength screening, frequency locking and spectral demodulation, optical etalons are widely used in high-end scientific research and precision laser equipment.
As a vital emerging sector of modern three-dimensional spatial economy, the low-altitude economy has become a new global growth driver. It covers a wide range of commercial scenarios, including UAV navigation and obstacle avoidance, precise airspace management, aerial mapping, low-altitude logistics distribution, security monitoring and emergency disaster rescue. Nevertheless, frequent extreme weather, complex terrain obstacles and increasingly dense low-altitude flight activities pose severe challenges to the safety and stability of low-altitude aircraft operations.
Laser pump sources are the core energy input component of solid-state lasers and laser amplifiers, and their performance directly determines the output power, beam quality and service life of the entire laser system. In scenarios such as industrial processing, scientific research experiments and high-end equipment, improper pump source selection will not only result in substandard system performance, but also bring a series of problems such as rapid device degradation and high operation and maintenance costs. This article sorts out the core selection logic and key pitfalls of pump source procurement, and provides selection references based on mature, mass-produced high-reliability products to help purchasers efficiently screen suitable products.
Shandong Haucore Optoelectronics Co., Ltd. introduces the HGLD‑792‑COS‑D‑10WB semiconductor laser within its COS series. Delivering an output power of 10 W at a central wavelength of 792 nm, this device adopts gold‑tin bonding COS packaging. Featuring high reliability and long service life, it serves as a preferred pump source for solid‑state lasers and is widely deployed in industrial processing, laser display, medical & aesthetic treatment, scientific research and other fields.
Loading...
Name
Phone
Organization
Use Case
Database Platform