DKDP switch
DKDP DKDP Crystal Device, Series
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| DKDP(KD*P)-Chemical Formula | KD₂PO₄ |
| DKDP(KD*P)-Lattice Parameter | 7.4697 |
| DKDP(KD*P)-Lattice Parameter | 6.9766 |
| DKDP(KD*P)-Density | 2.355g/cm³ |
| DKDP(KD*P)-Mohs Hardness | 2.5 |
| DKDP(KD*P)-Light Transmission Range | 200~2150nm |
| DKDP(KD*P)-Nonlinear Coefficient | 0.40pm/V |
| DKDP(KD*P)-Electro-optic Coefficient | 8.8pm/V |
| DKDP(KD*P)-Electro-optic Coefficient | 25pm/V |
| DKDP(KD*P)-Absorptivity | 0.006/cm |
| DKDP(KD*P)-Laser Damage Threshold | >3GW/cm² |
| DKDP(KD*P)-Extinction Ratio | 30dB |
| DKDP(KD*P)-Deliquescence Characteristic | Yes |
Applications
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
LGS Electro-Optic Q-Switch
Electro-Optics
Crystro
Lattice Parameter: a=b=7.453A. c=6.293A Transmission Band: 242~3200nm Refractive Index: 1.89nm
LGS Electro-Optic Q-Switch LGS Silicon Q. LGS Series Q. DKDP, RTP Li NbO3 Series Q.
-
Faraday Rotator
Electro-Optics
Crystro
Faraday Rotator Faraday Rotator Can. Faraday Rotator.
-
LiIO3
Electro-Optics
Zcoptic
Spatial Structure: Hexagonal, point group P63 Transmission Range: 300-5000 nm Nonlinear Coefficient: d15=-5.5×10-12 m/V
Lithium iodate (LiIO3) is a nonlinear crystal with early industrial application and a relatively high nonlinear coefficient, usable for frequency doubling, tripling and mixing of low- and medium-power lasers. Zhongce provides large-size LiIO3 crystals with excellent optical uniformity, along with polishing, coating services and sealed mounts. This crystal is prone to deliquescence and must be stored in a dry, sealed environment; its damage threshold is low, and it is not recommended for high-power lasers.
-
Acousto-Optic & Electro-Optic Crystals
Electro-Optics
Laiogd
LiNbO3: LiNbO3 crystal is widely used in electro-optic modulators and Q-switches in Nd:YAG, Nd:YLF and Ti:Sapphire lasers, as well as in modulators in optical fibers. Standard: Z-cut with gold-coated X faces. LiTO3: LiTaO3 crystal is an electro-optic crystal widely used in electro-optic devices; it has excellent nonlinear optical and electro-optic properties and a high damage threshold.
Acousto-optic & electro-optic crystals include LiNbO3 and LiTaO3. LiNbO3 crystals are conventionally Z-cut with gold coating on the X face; LiTaO3 is a widely used electro-optic crystal with excellent nonlinear optical and electro-optic properties and a high damage threshold.
Related Articles
Fiber lasers and fiber amplification systems require excitation sources with stable wavelength, narrow spectral linewidth and consistent output power.
BEIJING JIEPU TREND supplies YAG+Er:YAG+YAG bonded composite slab laser crystals for high‑power solid‑state laser systems. The monolithic slab consists of two undoped YAG end‑cap layers and a central Er‑doped YAG gain segment. The overall dimension is 9 mm×9 mm×9 mm.
The MSL‑T series water‑cooled continuous‑wave single‑longitudinal‑mode lasers from Changchun New Industries Optoelectronics (CNI) deliver key research wavelengths including 369 nm, 405 nm and 770 nm.
Ytterbium‑doped fiber serves as the core energy‑conversion component inside a fiber laser. Pump light emitted by laser diodes is coupled into the gain fiber, and energy is transferred to signal laser beams via ytterbium ion energy‑level transition for power amplification. Two dominant pump wavelengths, 915 nm and 976 nm, have been widely adopted over decades. With the rapid progress of pump chip and wavelength‑locking technology, 976 nm edge‑emitting laser (EEL) pumps have gradually surpassed the 915 nm route and become the new industry mainstream. Shenzhen Lemon Photonics Technology Co., Ltd keeps developing high‑performance pump chips for fiber laser manufacturers.
Loading...
Name
Phone
Organization
Use Case
Database Platform