H-K9L
H-K9L is the most commonly used colorless optical glass, widely used in visible and near-infrared optical components. ★ Transmission range: 330 nm~2100 nm ★ Thermal expansion coefficient: 7.5X10 ^-6 /K ★ Density: 2.52 g/cm ^3
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Coefficient of Thermal Expansion | 7.5X10 ^-6 /K |
Datasheet
Supplier Information
Related Products
-
RCUT fully automated sapphire cutting device
Optical Material
Hglaser
Average output power: ≥30W/≥70W Pulse width: ＜10ps Single pulse energy: ＞270u（j 150KHz）
The rapid cutting of sapphire mobile phone windows is being developed; new technologies for leather-second lasers are being introduced; and the processing of original lasers has the advantage of speed, fall edge and no cone. Devices can also be used for sapphire lens caps, home key cutting; various optical glass cuttings; wide application
-
Full automatic leather seconds laser sapphire cutting/fissile equipment
Optical Material
Hglaser
• Use of leather-second laser processing; efficient cutting of transparent materials such as sapphire, glass, etc. • High processing accuracy; no cones; drop edges of less than 10 m; precise optical circuit design with high-speed high-precision straight-line electric power; and guaranteed quality laser transmission. • Equipment of automated processing systems
-
Silicon tablet laser cutting intelligence equipment
Optical Material
Hglaser
Flat: <0.15mm Parallel degrees: <0.3mm
Laser cutting for flat-wire silicon steel. They consist mainly of marble racks, XY-line electrical platforms, visual capture systems, super-fast laser systems and cooling systems
-
TO Large Power Blue Light Laser (Silon Carbide Thermal Deposition)
Optical Material
Iqpackage
Seal Size: TO5 Materials: Deforestable alloy/copper Driver current: 3.2A
Our company's blue-light lasers use carbide silica heat; they significantly increase dispersive performance; they use nitrogen containment to improve product reliability; they apply to laser lighting, laser engraving, laser welding, laser display, etc
-
Sapphire window
Optical Material
Gem-oe
Optical valid calibre: Φ1; Φ0.85; Φ1.6; Φ2.2; Φ3.2; Φ11; Φ26; 8.58.59; 137; 16x4 Metalized area: ≥Φ1.25; ≥Φ1.15; ≥Φ1.8; ≥Φ2.4; ≥Φ3.4; ≥Φ11.4; ≥Φ26.4; ≥8.98.9; ≥13.47.4; ≥16.4x4.4
The flat windows should be used in areas such as light communications, photoelectronics and sensors that can be seen in near-infrared bands; the main products are sapphire, stone, and K9 glass windows. The main specifications for sapphire flat windows are: φ1.8 x 0.28; φ2.0 x 0.28; φ2.5 x 0.28; φ2.87 x 0.28; φ2.9 x 0.28; etc.; customisation as required by the client
Related Articles
A laser bar is an array semiconductor laser chip integrated with dozens of emitters, which realizes hundred-watt quasi-continuous output on a single chip. With regular emitter arrangement and controllable fill factor, integrated thermal design and superior wall-plug efficiency compared to single chips, it acts as the core light source for high-power pumping, medical lasers and precision processing.
Driven by the continuous pursuit of higher precision and efficiency in optical communication and optoelectronic device manufacturing, OLCR-1000 Low-Coherence Interferometer, independently developed by Wuhan Guanggu Interconnect Technology Co., Ltd., provides an innovative technical solution for distributed return loss testing of optical fibers and optoelectronic devices.
Fluoride crystal glass and K9 optical glass are two core optical substrates widely used in precision optical systems, laser equipment and photoelectric scientific research.
For pulsed laser and full-spectrum optical testing, photodiodes and thermopiles have inherent drawbacks. Photodiodes show weak response in infrared band, while thermopiles feature slow response and cannot capture nanosecond narrow pulses.
Loading...
Name
Phone
Organization
Use Case
Database Platform