Potassium Titanyl Phosphate (KTiOPO4, KTP)

Potassium Titanyl Phosphate (KTiOPO4, KTP)

Supplier
Lambdaoptics
Category
Optical Crystals
Origin
China

KTP (KTiOPO4) serves commercial/military lasers, laboratory/medical systems, rangefinders, lidar, optical communications and industrial lasers. It commonly doubles Nd:YAG/other Nd lasers at low-to-medium power densities. Intracavity/extracavity doubled Nd lasers are described as gradually replacing visible dye/tunable sapphire lasers and serving green-light research sources. Figures reference typeII doubling in XY/XZ. SHG/optical parametric amplification tunes Nd-ion systems from visible600nm to mid/far-IR4500nm. High-rate, mW-average-power operation can give stable continuous trains of fs pulses. Nd:YAG1064nm pumping converts to2120nm at about66% efficiency. Figures reference532nm-pumped OPO in XZ/XY. Another use amplifies pump light from X-cut KTP using noncritical phase matching:700–1000nm pumps yield1040–1450nm signal and2150–3200nm idler with about45% conversion and narrowband high-quality output. Insulating properties also suit tunable electro-optics; referenced tables compare E-O modulators/waveguide materials. AR1064/532nm gives R<0.2% at1064nm and R<0.5% at532nm. The damage entry is retained as “>300MW/cm2@1064,532nm0MW/cm2@1064,532nm”. Other options are broadband AR and HR1064nm/HT532nm with R>99.8% and T>90%. Dimensions are width±0.1mm×height±0.1mm×length+0.1/-0.1mm for length<2.5mm. No visible internal path is stated under a50mW green laser. A separate entry is “>0.3 for532nm,TEM00,10ns,10HZ(AR-coated)”. Sellmeier equations (l in μm): n_x²=3.0065+0.03901/(l²-0.04251)-0.01327l²; n_y²=3.0333+0.04154/(l²-0.04547)-0.01408l²; n_z²=3.3134+0.05694/(l²-0.05658)-0.01682l².

Specification Snapshot
Chemical and Structural Properties - Crystal Structure
Orthorhombic Crystal System, Space Group Pna2₁, Point Group mm2
Chemical and Structural Properties - Density
3.01 g/cm³
Optical and Nonlinear Optical Properties - Transmission Wavelength-Band Range
350~4500nm
Optical and Nonlinear Optical Properties - SHG Phase-Matching Range [Type II]
497 ~ 1800nm (Type II)
Flatness [633nm]
Less Than λ/8
Wavefront Distortion [633nm]
Less Than λ/8
Request a Quote Download Datasheet
Save to Favorites Save to Favorites

Overview

KTP (KTiOPO4) serves commercial/military lasers, laboratory/medical systems, rangefinders, lidar, optical communications and industrial lasers. It commonly doubles Nd:YAG/other Nd lasers at low-to-medium power densities. Intracavity/extracavity doubled Nd lasers are described as gradually replacing visible dye/tunable sapphire lasers and serving green-light research sources. Figures reference typeII doubling in XY/XZ. SHG/optical parametric amplification tunes Nd-ion systems from visible600nm to mid/far-IR4500nm. High-rate, mW-average-power operation can give stable continuous trains of fs pulses. Nd:YAG1064nm pumping converts to2120nm at about66% efficiency. Figures reference532nm-pumped OPO in XZ/XY. Another use amplifies pump light from X-cut KTP using noncritical phase matching:700–1000nm pumps yield1040–1450nm signal and2150–3200nm idler with about45% conversion and narrowband high-quality output. Insulating properties also suit tunable electro-optics; referenced tables compare E-O modulators/waveguide materials. AR1064/532nm gives R<0.2% at1064nm and R<0.5% at532nm. The damage entry is retained as “>300MW/cm2@1064,532nm0MW/cm2@1064,532nm”. Other options are broadband AR and HR1064nm/HT532nm with R>99.8% and T>90%. Dimensions are width±0.1mm×height±0.1mm×length+0.1/-0.1mm for length<2.5mm. No visible internal path is stated under a50mW green laser. A separate entry is “>0.3 for532nm,TEM00,10ns,10HZ(AR-coated)”. Sellmeier equations (l in μm): n_x²=3.0065+0.03901/(l²-0.04251)-0.01327l²; n_y²=3.0333+0.04154/(l²-0.04547)-0.01408l²; n_z²=3.3134+0.05694/(l²-0.05658)-0.01682l².

Specifications

ParameterValue
Chemical and Structural Properties - Crystal StructureOrthorhombic Crystal System, Space Group Pna2₁, Point Group mm2
Chemical and Structural Properties - Lattice Parametersa=6.404?, b=10.616?, c=12.814?, Z=8
Chemical and Structural Properties - Melting PointAbout 1172°C
Chemical and Structural Properties - Mohs Hardness5
Chemical and Structural Properties - Density3.01 g/cm³
Chemical and Structural Properties - Thermal Conductivity13W/m/K
Chemical and Structural Properties - Thermal Expansion Coefficientaₓₐyₐ_z₌₀.₆ₓ₁₀⁻⁶/⁰C ₌₉ₓ₁₀⁻⁶/⁰C, =11x10⁻⁶/⁰C
Optical and Nonlinear Optical Properties - Transmission Wavelength-Band Range350~4500nm
Optical and Nonlinear Optical Properties - SHG Phase-Matching Range [Type II]497 ~ 1800nm (Type II)
Optical and Nonlinear Optical Properties - Thermo-Optic Coefficient (/°C)dnx/dT=1.1X10⁻⁵dny/dT=1.3X10⁻⁵dnz/dT=1.6X10⁻⁵
Optical and Nonlinear Optical Properties - Absorption Coefficient<0.1%/cm at 1064nm <1%/cm at 532nm
Temperature Acceptance [For Type II SHG of a Nd:YAG laser at 1064nm]24 °C-cm
Spectral Acceptance [For Type II SHG of a Nd:YAG laser at 1064nm]0.56 nm-cm
Angular Acceptance [For Type II SHG of a Nd:YAG laser at 1064nm;φ]14.2 mrad-cm
Angular Acceptance [For Type II SHG of a Nd:YAG laser at 1064nm;q]55.3 mrad-cm
Walk-off Angle [For Type II SHG of a Nd:YAG laser at 1064nm]0.55 °
Optical and Nonlinear Optical Properties - Nonlinear Coefficientdₑff(II)? (d₂₄ - d₁₅)sin2fsin2q - (d₁₅sin²f + d₂₄cos²f)sinq
Optical and Nonlinear Optical Properties - Nonvanishing Nonlinear Magnetization Coefficientd₃₁=6.5 pm/V d₂₄=7.6 pm/V; d₃₂= 5 pm/V d₁₅=6.1 pm/V; d₃₃=13.7 pm/V
Electro-Optic Coefficient R [KTP; Electro-Optic Regulator; Phase]35.0 pm/V
k(10-6/°C) [KTP; Electro-Optic Regulator; Phase]31
Electro-Optic Performance Coefficient N7r2/e [KTP; Electro-Optic Regulator; Phase]6130 (pm/V)2
Electro-Optic Coefficient r [KTP; Electro-Optic Regulator; Amplitudee]27.0 pm/V
k(10-6/°C)°C) [KTP; Electro-Optic Regulator; Amplitudee]11.7
Electro-Optic Performance Coefficient n7r2/e [KTP; Electro-Optic Regulator; Amplitudee]3650 (pm/V)2
Electro-Optic Coefficient r [KTP; Electro-Optic Optical Waveguide Material]35 pm/V
eeff(e11e33)1/2₃₃)¹/² [KTP; Electro-Optic Optical Waveguide Material]13
Electro-Optic Coefficient n3r/eeff [KTP; Electro-Optic Optical Waveguide Material]17.3 pm/V
Dimensional Tolerance [Length ≥2.5mm](Width ±0.1mm)x(Height ±0.1mm)x(Length +0.5/-0.1mm)
Dimensional Tolerance [Length <2.5mm](Width ±0.1mm)x(Height ±0.1mm)x(Length +0.1/-0.1mm)
Clear Aperture DimensionCentral 90%
Flatness [633nm]Less Than λ/8
Wavefront Distortion [633nm]Less Than λ/8
Edge Chamfer [45°]≤0.2mm@45°
Edge Chipping≤0.1mm
Surface Finish [MIL-PRF-13830B]Less Than 10/5
Clear-Surface ParallelismLess Than 20 Inches
Side-Face Perpendicularity≤5'
Angular Tolerance△θ≤0.25°, △ф≤0.25°
Damage Threshold [1064nm, TEM00, 10ns, 10HZ (AR-coated)]>0.5 GW/cm
Damage Threshold [532nm, TEM00, 10ns, 10HZ (AR-coated)]>0.3 GW/cm

Applications

15W Diode Pumping of0.5% Nd:YVO4/KTP Can Yield8W Green;Our2×2×5mm KTP and3×3×1mm2% Nd:YVO4 Convert1W Diode Pump to200mW Green;180mw LD-Pumped Bonded Nd:YVO4/KTP Can Yield2–5mw Green;KTP Also Mixes Intracavity810nm Diode Pump/1064nm Nd:YAG for Blue and Doubles1300nm Nd:YAG/Nd:YAP;Table1 Describes High Damage Threshold,Wide Optical Transmission Band(>15GHZ),Thermal/Chemical Stability,Low Absorption,Making KTP More Suitable than LiNbO3 for E-O Devices;Ion Exchange on KTP Produces Low-Absorption Waveguides,Expanding Integrated-Optic Uses

Key Features

Large Nonlinear Coefficient/Acceptance Angle;Small Walk-Off;Wide Temperature/Spectral Bandwidth;High Photoelectric Coefficient/Low Dielectric Constant;Large Antiresistance Ratio(抗阻比值);Nonhygroscopic/Stable

Datasheet

Please provide your email to download the datasheet.

Your name
Email Address

Invalid email format. Please try again.

Send Request

Supplier Information

La
Lambdaoptics
View Supplier →
Fuzhou Lambda Optics Co., Ltd. is located in Fuzhou, Fujian Province, the central city of the West Strait Economic Zone. It is a cold-processing optical enterprise specializing in the research, development, processing and sales of optical crystals and high-precision optical components. The company has a modern standard factory building of 1,200 square meters, over 60 employees, and is equipped with high-precision production and testing equipment such as single-axis machines, two-axis machines, inner circle cutting machines, coating machines, laser plane interferometers, and ultra-clean benches. The company has passed ISO9001:2015 system certification. Products are widely used in laser systems, optical communication equipment, medical equipment, optical instruments, etc. Main products include optical components (prisms, mirrors, optical windows, waveplates, beam splitters, filters, etc.) and optical thin films (anti-reflection coatings, beam splitter coatings, metallic reflective coatings, dielectric high-reflection coatings, etc.). The company adheres to the philosophy of 'quality first, continuous improvement, customer satisfaction, industry pioneer', and its product quality and service have been well received by domestic and foreign customers. On the premise of sustainable development, based on quality, the company is dedicated to providing customers with cost-effective products and first-class service, and is willing to conduct in-depth exchanges and cooperation with domestic and foreign production and scientific research institutions pursuing high quality.

Request a Quote

Our team responds within 24–48 hours
Potassium Titanyl Phosphate (KTiOPO4, KTP)
Lambdaoptics · Optical Crystals
Direct from Manufacturer
Your inquiry will be sent directly to the manufacturer
Photonics Source Platform
We handles the inquiry on your behalf
Your information is protected and will never be shared without consent.
Contact Us

Loading...

GetExperimental Plan

Name

Phone

+86

Organization

Use Case

AI Parametric Selection
Smart Match · Precise Recs
Enter Specifications
AI Smart Matching
Get Best Matches
Skip Manual Comparison
Find Best Solutions Fast
Select Now →