NL-D6521-06 (Point Light Source)
NL-D6521-06 is a high-performance PIN Point LED. A specially designed package eliminates stray leakage/reflections;optimized optics produce a clean,uniform circular spot. Emitting aperture:160um. Package dimensions:2.1×2.1×1.0,similar to2121;no package-dimension unit is supplied in this paragraph. The supplied model-specific PDF introduction identifies a red LED point source with Φ160μm emitting size.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Emitting-Area Dimensions [Product Introduction / Features on Page 1; Dimension Drawing Not Used] | Φ160 |
| Forward Current I_F [Maximum Ratings；Ta=25°C] | 100 mA |
| Pulse Current I_FP [Maximum Ratings; Ta=25°C; Pulse Width 300μs / Duty Cycle 5%] | 1000 mA |
| Reverse Voltage V_R [Maximum Ratings；Ta=25°C] | 3 V |
| Junction Temperature Tj [Maximum Ratings；Ta=25°C] | 125 °C |
| Operating Temperature Topr. [Maximum Ratings；Ta=25°C] | -40~+105 °C |
| Storage Temperature Tstg. [Maximum Ratings；Ta=25°C] | -40~+125 °C |
| Forward Voltage Drop V_F [Electro-Optical Characteristics；Ta=25°C；I_F=20mA] | typical:2.1 V; max:2.8 V |
| Reverse Current I_R [Electro-Optical Characteristics；Ta=25°C；V_R=3V] | max:10 μA |
| Output Power P_O [Electro-Optical Characteristics；Ta=25°C；I_F=20mA] | typical:3.3 mW |
| Peak Wavelength λ_P [Electro-Optical Characteristics；Ta=25°C；I_F=20mA] | typical:650 nm |
| Half-Width Δλ [Electro-Optical Characteristics；Ta=25°C；I_F=20mA] | typical:17 nm |
| Half-Value Angle Δθ [Electro-Optical Characteristics；Ta=25°C；I_F=20mA] | typical:±60 deg. |
| Storage Temperature after Unpacking [Independent Note on Page 5] | 5~30 °C |
| Storage Humidity after Unpacking [Independent Note on Page 5] | <60 % |
| Reflow-Soldering Time Limit after Unpacking [Independent Note on Page 5] | 72 小时 |
| Post-Soldering Cleaning Conditions [Independent Note on Page 5; Alcohol Cleaning Recommended; Pretest before Ultrasonic Cleaning to Confirm Whether LEDs Are Damaged] | 30°C/3 Minutes or 50°C/30 Seconds |
Applications
Key Features
Datasheet
Supplier Information
Related Products
-
Monochromatic LED Fluorescence Module STL-MOFL-U
Light-Emitting Diodes (LEDs)
Situoli
Light Source: 10W Adjustable LED Service Life: >60000 小时 Light-Intensity Control Range: 0%~100% Linear Adjustment
SITUOLI's monochromatic LED illumination unit provides brightfield or fluorescence illumination for upright microscopes. Stable performance and efficient fluorescence illumination serve varied applications. A short optical path increases brightness and fluorescence excitation efficiency for better signal detection; adjustable intensity reduces photobleaching. The specially designed LED source lasts 60,000 hours. Combined with objectives, tube lenses, camera interfaces and cameras, it forms a direct microscopy imaging system. Advanced STL-IMCS video/image-processing software supplied with the camera supports life-science and other research. It integrates into automation such as automatic slide readers and pathology slide scanners, primarily for fungal, microbial and gynecological testing.
-
Monochromatic LED Fluorescence Module STL-MOFL-B
Light-Emitting Diodes (LEDs)
Situoli
Light Source: 10W Adjustable LED Service Life: >60000 小时 Light-Intensity Control Range: 0%~100% Linear Adjustment
SITUOLI's monochromatic LED illumination unit provides brightfield or fluorescence illumination for upright microscopes. Stable performance and efficient fluorescence illumination serve varied applications. A short optical path increases brightness and fluorescence excitation efficiency for better signal detection; adjustable intensity reduces photobleaching. The specially designed LED source lasts 60,000 hours. Combined with objectives, tube lenses, camera interfaces and cameras, it forms a direct microscopy imaging system. Advanced STL-IMCS video/image-processing software supplied with the camera supports life-science and other research. It integrates into automation such as automatic slide readers and pathology slide scanners, primarily for fungal, microbial and gynecological testing.
-
Sapphire-Based GaN Epitaxial LED
Light-Emitting Diodes (LEDs)
Jmwafer
Sapphire-Based GaN LED Epitaxy (2~8 Inches) - Substrate Diameter: 50.8 mm Sapphire-Based GaN LED Epitaxy (2~8 Inches) - Substrate Diameter: 100mm Sapphire-Based GaN LED Epitaxy (2~8 Inches) - Substrate Diameter: 150mm
Sapphire-Based Epitaxial GaN LED Is a Light-Emitting Diode with GaN Grown on Sapphire.
-
Silicon-Based GaN Epitaxial LED
Light-Emitting Diodes (LEDs)
Jmwafer
Silicon-Based GaN LED Epitaxy (2~8 Inches) - Substrate Diameter: 50.8mm Silicon-Based GaN LED Epitaxy (2~8 Inches) - Substrate Diameter: 100mm Silicon-Based GaN LED Epitaxy (2~8 Inches) - Substrate Diameter: 150mm
GaN-on-Si LED Epitaxy Combines Efficient GaN Emission/Low-Cost Silicon for LED Chips,Important Research Direction.
-
Gallium Arsenide Epitaxial LED
Light-Emitting Diodes (LEDs)
Jmwafer
GaAs Red LED Epitaxy (2~6 Inches) - Substrate Diameter: 2 inch - 50.8mm GaAs Red LED Epitaxy (2~6 Inches) - Substrate Diameter: 4 inch - 100mm GaAs Red LED Epitaxy (2~6 Inches) - Substrate Diameter: 6 inch - 150mm
Epitaxial P/N/MQW Layers on GaAs,Primarily IR/NIR Emission700–1100nm.
Related Articles
VCSEL, short for Vertical Cavity Surface Emitting Laser, is a widely used semiconductor laser component in modern optoelectronics. Unlike traditional edge-emitting lasers, VCSEL emits laser light vertically from its chip surface. Thanks to its low power consumption, stable beam quality, low cost, and easy integration, it has become the core light source for 3D sensing, wearable devices, and high-speed optical communication.
As fundamental refractive optical components, plano‑convex spherical lenses consist of one convex spherical surface and one flat surface.
FiDAR, the fiber‑optic radar vehicle positioning and tracking system developed by Jianhe Bafang, is a high‑sensitivity distributed fiber‑sensing solution designed for intelligent traffic road monitoring. It outputs real‑time spatial coordinates of every vehicle across the full road section around‑the‑clock, delivering a brand‑new sensing technology for vehicle‑road cooperation, smart highway construction and urban traffic management.
Raybowlaser, a professional manufacturer of high-power laser chips, has officially launched its upgraded new-generation 1470nm high-performance laser chip. Achieving groundbreaking progress in rated output power and wall-plug efficiency (WPE), this innovative laser chip delivers superior and reliable core light source solutions for medical cosmetology, industrial processing, agricultural applications and scientific research equipment.
Loading...
Name
Phone
Organization
Use Case
Database Platform