2940nm Er:YAG Laser PM2940-2500MSU-E
2940nm Er:YAG,>2.5J/Pulse,up to15Hz,Imported Xenon Lamp/Crystal Rod/Barium-Sulfate Cavity,for Aesthetic/Orthopedic/Dental Device R&D,Materials/Research.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Wavelength | 2940±0.5nm |
| Repetition Frequency | 1-15Hz |
| Pulse Width | 100-400μs |
| Pulse Energy [10Hz] | 2.5J@10Hz |
| Beam Divergence Angle | <15mrad |
| Energy Stability [RMS over 2 hours] | ±3% RMS over 2 hours |
| Operating Voltage [AC] | 90-260V AC |
| Cooling Method | Water-Cooled |
Applications
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
ND:YAG Crystal (Neodymium-Doped Yttrium Aluminum Garnet)
Laser Crystals
U-photonics
Chemical Formula: Y ₃Al ₅O ₁₂ Crystal Structure: Cubic Lattice Parameters: 12.01Å
Nd:YAG Is among Earliest/Best-Known Laser Crystals,Still Common for Near/Far-IR Solid-State Lasers,Doubling/Tripling due to Strong Basic Properties.
-
ND:YVO4 (Neodymium-Doped Yttrium Orthovanadate)
Laser Crystals
U-photonics
Atomic Density [Nd1.0%]: 1.26x10²⁰ atoms/cm³ (Nd1.0%) Crystal Structure: Tetragonal, Space Group D₄ₕ-I4/amd, a=b=7.1193A, c=6.2892A Density: 4.22g/cm³
Nd:YVO₄ is an excellent laser crystal for diode-pumped lasers, particularly low/medium power. Compared with Nd:YAG, it has higher pump absorption and a larger stimulated-emission cross section. Uses include machinery, materials processing, spectroscopy, wafer inspection, displays, medical testing, laser printing and data storage. The referenced comparison table covers Nd:YVO₄/Nd:YAG stimulated-emission cross section(σ), absorption coefficient(α), fluorescence lifetime(τ), absorption length(La), threshold power(Pth) and pump quantum efficiency(η).
-
YB:YAG (Ytterbium-Doped Yttrium Aluminum Garnet Crystal)
Laser Crystals
U-photonics
Material and Specifications - Doping Concentration: Yb: 5~15 at% Materials and Specifications - Wavefront Distortion: ≤0.125λ/Inch Materials and Specifications - Extinction Ratio: ≥28 dB
Yb:YAG is a promising solid-state laser medium particularly suited to diode pumping compared with traditional Nd-doped systems. Its broader absorption bandwidth than Nd:YAG reduces diode-laser temperature-management requirements. Upper-state lifetime is longer, and thermal load per unit pump power is stated as 3–4 times lower. Yb:YAG at 1030nm can replace Nd:YAG at 1064nm, while its 515nm second harmonic can replace 514nm argon-ion lasers.
-
Cr4+YAG (Chromium-Doped Yttrium Aluminum Garnet Crystal)
Laser Crystals
U-photonics
Cr4+:YAG Basic Properties - Crystal Structure: Cubic Crystal System Cr4+:YAG Basic Properties - Doping Concentration: 0.5 mol% ~ 3 mol% Cr4+:YAG Basic Properties - Mohs Hardness: 8.5
Cr⁴⁺:YAG is an excellent passive-Q-switch crystal for Nd:YAG, Nd:YLF, Nd:YVO4 and other Nd- or Yb-doped lasers operating at 0.8–1.2μm. A passive Q-switch or saturable absorber provides substantial pulses without an electro-optic switch. Good chemical stability, durability, UV resistance, thermal conductivity, high damage threshold (>500MW/cm²) and easy handling make it a strong option for 1um Nd lasers, described as replacing conventional LiF and dyes in passive Q-switching.
-
Erbium Glass (er:glass)
Laser Crystals
U-photonics
Erbium Laser Glass Characteristics - Large Excitation Wavelength lm: 1535.861nm Erbium Laser Glass Characteristics - Fluorescence Half-Width (dl): 29.9nm Erbium Laser Glass Characteristics - Fluorescence Lifetime t: > 8.2ms
Erbium-doped phosphate laser glass(er:glass) is described as emitting eye-safe1.54mm laser light,with stimulated-emission cross section written8´10-21cm⁻² and fluorescence lifetime>8.2ms. Uses include field ranging,target designation,medical devices,LiDAR,vehicle collision prevention,helicopter cable avoidance,atmospheric observation and communications. Rod sizes are written f1–20(d)×10–120(l)mm,with sheets also available. A typical xe-lamp-pumped f3×30 version has threshold<6j and slope efficiency>1.8%for ranging. LD-pumped versions use different Er/Yb concentrations for waveguide/fiber amplifiers and communications.
Related Articles
Laser pump sources are the core energy input component of solid-state lasers and laser amplifiers, and their performance directly determines the output power, beam quality and service life of the entire laser system. In scenarios such as industrial processing, scientific research experiments and high-end equipment, improper pump source selection will not only result in substandard system performance, but also bring a series of problems such as rapid device degradation and high operation and maintenance costs. This article sorts out the core selection logic and key pitfalls of pump source procurement, and provides selection references based on mature, mass-produced high-reliability products to help purchasers efficiently screen suitable products.
Shandong Haucore Optoelectronics Co., Ltd. introduces the HGLD‑792‑COS‑D‑10WB semiconductor laser within its COS series. Delivering an output power of 10 W at a central wavelength of 792 nm, this device adopts gold‑tin bonding COS packaging. Featuring high reliability and long service life, it serves as a preferred pump source for solid‑state lasers and is widely deployed in industrial processing, laser display, medical & aesthetic treatment, scientific research and other fields.
Fomoptic delivers integrated one‑stop optical solutions covering precision optical fabrication and custom vacuum coating services. Supported by complete processing production lines, comprehensive metrology equipment and experienced engineering team, we provide full‑chain customized components, ranging from blank shaping, ultra‑precision polishing to thin‑film coating, for laser systems, infrared imaging, industrial optics and scientific‑research projects.
Fiber lasers and fiber amplification systems require excitation sources with stable wavelength, narrow spectral linewidth and consistent output power.
Loading...
Name
Phone
Organization
Use Case
Database Platform