10G SFP+ 1310nm 20KM Dual Fiber Optical Transceiver Module FYPPB-4596-80B
Flyin's 10G SFP+ transceiver module is individually tested to be used on a series of switches, routers, servers, network interface cards etc. Featuring low power consumptionand and high speed, this 10G SFP+ transceiver is ideal for data centers, enterprise wiring closets, service provider transport applications, Radio & Baseband Units, etc. 10Gb/s SFP+ Dual Fiber Optical Transceiver Remark: Above "**" refers to the corresponding wavelength. For CWDM models, it refers to the wavelength 1270nm~1610nm. For DWDM models, it refers to the wavelength C17(1563.86)~C61(1528.77nm).
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| 10Gb/s SFP+BIDI Single Mode Optical Transceiver-Rate | 10Gb/s |
| 10Gb/s SFP+BIDI Single Mode Optical Transceiver-Wavelength | Tx1490/Rx1550nm |
| 10Gb/s SFP+BIDI Single Mode Optical Transceiver-Transmission Distance | 80KM |
| 10Gb/s SFP+BIDI Single Mode Optical Transceiver-Output Opt. Pwr. | 0~5dBm |
| 10Gb/s SFP+BIDI Single Mode Optical Transceiver-Rx. Sensitivity | ≤-23dBm |
| 10Gb/s SFP+BIDI Single Mode Optical Transceiver-Laser | EML |
| 10Gb/s SFP+BIDI Single Mode Optical Transceiver-Interface | LC |
Applications
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
100G QSFP28 Active Optical Cable OM3 FYOC-QDD-**MB Transmitters and Receivers Opticres
Rate [Rate: 400Gb/s to 400Gb/s；Interface: QSFP-DD to QSFP-DD]: 400Gb/s to 400Gb/s Interface [Rate: 400Gb/s to 400Gb/s；Interface: QSFP-DD to QSFP-DD]: QSFP-DD to QSFP-DD Transmission Distance [Rate: 400Gb/s to 400Gb/s；Interface: QSFP-DD to QSFP-DD；Remark: Above “**”refers to the corresponding meters.]: **M(<100M)
This product is a high data rate parallel active optical cable (AOC), to overcome the bandwidth limitation of traditional copper cable. This product converts the parallel electrical input signals into parallel optical signals (light), by a driven Vertical Cavity Surface Emitting Laser (VCSEL) array. The light propagates through the ribbon fiber individually, and be captured by the photo diode array. The optical signals are converted into parallel electrical signals and outputted. Consequently, each terminal of the cable has 8 ports, 4 for data transmission and 4 for data receiving, to provide totally 100Gb/s data exchange. Remark: Above “**”refers to the corresponding meters.
-
100G QSFP28 Active Optical Cable OM3 FYOC-OSS-**MB Transmitters and Receivers Opticres
Rate [Rate: 400Gb/s to 400Gb/s；Interface: OSFP to OSFP]: 400Gb/s to 400Gb/s Interface [Rate: 400Gb/s to 400Gb/s；Interface: OSFP to OSFP]: OSFP to OSFP Transmission Distance [Rate: 400Gb/s to 400Gb/s；Interface: OSFP to OSFP；Remark: Above “**”refers to the corresponding meters.]: **M(<30M)
This product is a high data rate parallel active optical cable (AOC), to overcome the bandwidth limitation of traditional copper cable. This product converts the parallel electrical input signals into parallel optical signals (light), by a driven Vertical Cavity Surface Emitting Laser (VCSEL) array. The light propagates through the ribbon fiber individually, and be captured by the photo diode array. The optical signals are converted into parallel electrical signals and outputted. Consequently, each terminal of the cable has 8 ports, 4 for data transmission and 4 for data receiving, to provide totally 100Gb/s data exchange. Remark: Above “**”refers to the corresponding meters.
-
100G QSFP28 Active Optical Cable OM3 FYOC-OSQD-**MB Transmitters and Receivers Opticres
Rate: 400Gb/s to 400Gb/s Interface: OSFP to QSFP-DD Transmission Distance [Remark: Above “**”refers to the corresponding meters.]: **M(<30M)
This product is a high data rate parallel active optical cable (AOC), to overcome the bandwidth limitation of traditional copper cable. This product converts the parallel electrical input signals into parallel optical signals (light), by a driven Vertical Cavity Surface Emitting Laser (VCSEL) array. The light propagates through the ribbon fiber individually, and be captured by the photo diode array. The optical signals are converted into parallel electrical signals and outputted. Consequently, each terminal of the cable has 8 ports, 4 for data transmission and 4 for data receiving, to provide totally 100Gb/s data exchange. Remark: Above “**”refers to the corresponding meters.
-
100G QSFP28 Passive Direct Attach Copper Cable FYDA-PP-**MB** Transmitters and Receivers Opticres
Rate: 10Gb/s Interface: SFP+ to SFP+ Sort: Passive
Flyin 100G QSFP28 to QSFP28 Passive Copper Cable assemblies are high performance, cost effective I/O solutions for LAN, HPC and SAN. The high speed cable assemblies meet and exceed 100 Gigabit Ethernet, InfiniBand EDR and temperature requirements for performance and reliability. The cables are compliant with SFF-8436 specifications and provide connectivity between devices using QSFP ports. Remark: Above “**”refers to the corresponding meters. “**”refers to the optional cable diameter.
-
100G QSFP28 Passive Direct Attach Copper Cable FYAC-PP-**MB** Transmitters and Receivers Opticres
Rate: 10Gb/s Interface: SFP+ to SFP+ Sort: Active
Flyin 100G QSFP28 to QSFP28 Passive Copper Cable assemblies are high performance, cost effective I/O solutions for LAN, HPC and SAN. The high speed cable assemblies meet and exceed 100 Gigabit Ethernet, InfiniBand EDR and temperature requirements for performance and reliability. The cables are compliant with SFF-8436 specifications and provide connectivity between devices using QSFP ports. Remark: Above “**”refers to the corresponding meters. “**”refers to the optional cable diameter.
Related Articles
For semiconductor, coating and laboratory vacuum chambers, thermal conductivity gauges suffer large measurement errors caused by gas type and ambient temperature.
Founded in Beijing in 2011, Beijing FJR Opto-electronic Technology Co., Ltd. specializes in R&D, manufacturing and sales of infrared thermal imaging equipment and complete optoelectronic systems.
A microlens array (MLA) is a high-precision optical component composed of hundreds or thousands of tiny, uniformly arranged micro lenses on a single flat substrate. Unlike traditional single lenses that focus one light beam, a microlens array can split, homogenize, and reshape light on a micro scale. It is widely paired with VCSELs, lasers, and image sensors, becoming a core part of modern miniature optical systems.
A laser bar is an array semiconductor laser chip integrated with dozens of emitters, which realizes hundred-watt quasi-continuous output on a single chip. With regular emitter arrangement and controllable fill factor, integrated thermal design and superior wall-plug efficiency compared to single chips, it acts as the core light source for high-power pumping, medical lasers and precision processing.
Loading...
Name
Phone
Organization
Use Case
Database Platform