High-Precision Servo Motor Controller DCL-01
JCOPTIX DCL single-channel servo controllers operate DOLL and DORR precision stages. A clock up to 20 MHZ enables speeds >500 mm/s even at fine resolution, according to requirements. Intelligent PID automatically handles complex conditions. Bode or Nichols analysis characterizes mechanics, while standard and advanced filters tune control and feedback. Many operations are automatic, but engineers retain full control of low-pass, notch, anti-notch, lead-lag, and other high-order filters. Built-in C-like programming runs simple motion control and calculations without a host or higher controller and stores programs in nonvolatile memory, reducing integration time and cost. A 5.0-inch full-color touchscreen simplifies operation. RS232 provides plug-and-play PC control, with standard hubs connecting multiple devices for multiaxis use. Labview, C#, C++, Python, and Matlab interfaces support development.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Controller Housing Material | Aluminum alloy |
| Supply Voltage | 220VAC |
| Operation Mode | Position and Velocity |
| Communication Method | RS232 |
| Number of Channels | 1 |
| Compatible Products | Direct-Drive Motorized Translation Stage |
| Power Connector | 15-Pin D-Type Male |
| Feedback Connector | 15-Pin D-Type Female |
| Rated current | 3A |
| Peak Current | 6A |
| Encoder Type | Incremental Encoder |
| Encoder Bandwidth | 5 MHz (20 M Counts/Second) |
| Encoder Power Supply | 5V |
| Touchscreen Control | 5.0" Full Color 1280*720 |
| Pulse Width Modulation Frequency | 40KHZ |
| Control Algorithm | 16-Bit Intelligent PID Adjustment |
| Velocity Profile | Trapezoidal/S-Curve |
| Number of Positions | 32 Bit |
| Input Power Requirements | 150W |
| Dimensions | 199.8 mm × 229.1 mm × 108.8 mm |
| Weight | 1.20 kg |
Key Features
Datasheet
Supplier Information
Related Products
-
21 Series (Serial) 21GA-E Controllers & Metrology Syntecclub
mechatrolink III (Yaskawa serial): O EtherCAT: O RTEX: O
21GA-E is designed for the glass industry, with dedicated interfaces and functions. Integrating vision modules and robots improves process efficiency and enables factory-wide automation, offering the highest-performance glass-machine solution.
-
BRM-6101 1.5A continuous-wave/pulsed laser driver controller Controllers & Metrology Brolight
Output Current: 0~1.5A Current resolution: 0.1mA Output Voltage: 0~15 V
The BRM-6101 is a feature-rich laser-diode/light-emitting-diode driver controller with continuously adjustable current up to 1.5A. It provides 5 modes: continuous, pulse, analog input, external trigger, and optical-power control, with connections for a photodiode and NTC sensor. The BRM-6101 combines high accuracy, low ripple, and multiple modes for laser-diode and pulse testing, semiconductor-emitter research, quantum-cascade-laser control, and steady optical-power control systems.
-
BRM-6102 15A continuous-wave/pulsed laser driver controller Controllers & Metrology Brolight
Output Current: 0~15A Current resolution: 1mA Output Voltage: 0~15 V
The BRM-6102 is a feature-rich laser-driver controller with continuously adjustable current up to 15A. It provides 5 modes: continuous, pulse, analog input, external trigger, and optical-power control, with connections for a photodiode and NTC sensor. The BRM-6102 combines high accuracy, low ripple, and multiple modes for seed-pump-source driving, VCSEL chips, lidar-source driving, research and industrial laser systems, and related uses.
-
BRM-6103 20A continuous-wave laser driver controller Controllers & Metrology Brolight
Output Current: 0~20A Current resolution: 2mA Output Voltage: 0~45 V
The BRM-6103 is a feature-rich laser-driver controller with continuously adjustable current up to 20A. It provides 3 modes: continuous current, analog input, and optical-power control, with connections for a photodiode and NTC sensor. The BRM-6103 combines high accuracy, low ripple, and multiple modes for high-power laser driving, constant optical-power control, and related uses.
-
BRM-6104 1A continuous-wave laser driver controller Controllers & Metrology Brolight
Output Current: 0~1A Current resolution: 0.1mA Output Voltage: 0~15 V
The BRM-6104 is a feature-rich laser-driver controller with continuously adjustable current up to 1A. It provides 3 modes: continuous current, analog input, and optical-power control, with connections for a photodiode and NTC sensor. The BRM-6104 combines high accuracy, low ripple, and multiple modes for laser-diode driving, constant optical-power control, and related uses.
Related Articles
Macro channel water-cooled stacked laser diodes integrate dozens of laser bars into one vertical stacked module with large-diameter macro flow cooling channels.
The CNGE 384 uncooled infrared core module is a high-performance core component for thermal imaging systems. Adopting mature uncooled infrared detection technology, it realizes all-weather thermal radiation perception and high-definition imaging without refrigeration equipment.
VCSEL, short for Vertical Cavity Surface Emitting Laser, is a widely used semiconductor laser component in modern optoelectronics. Unlike traditional edge-emitting lasers, VCSEL emits laser light vertically from its chip surface. Thanks to its low power consumption, stable beam quality, low cost, and easy integration, it has become the core light source for 3D sensing, wearable devices, and high-speed optical communication.
Founded in Beijing in 2011, Beijing FJR Opto-electronic Technology Co., Ltd. specializes in R&D, manufacturing and sales of infrared thermal imaging equipment and complete optoelectronic systems.
Loading...
Name
Phone
Organization
Use Case
Database Platform