Home All Products Test and Measurements Microscope Accessories External Sample Holder IMA-SA4
External Sample Holder IMA-SA4
Microscope Accessories

External Sample Holder IMA-SA4

Supplier
Jcoptix
Part Number
IMA-SA4
Category
Microscope Accessories
Origin
China

JCOPTIX external sample supports offer multiple heights for different microscopy applications, improving setup and experimental flexibility. The compact structure leaves ample room for objectives, patch clamps, condensers, and other equipment. Matching posts rotate through 360° for precise component alignment in imaging paths, with angular markings providing 5° adjustment increments. The rigid, stable structure accepts slides, dishes, recording chambers, patch clamps, multiwell plates, and common electrophysiology accessories, fitting most experimental platforms. Complete manual rigid-support sets or individual parts are available; each set includes a post holder, post, and rail or insert clamp. Inserts, slide clamps, and other expansion accessories are also available. Manual Z-axis rigid support. Model: IMA-ESH1. For upright or inverted microscopes; accepts 66 mm rail-series accessories; multiple heights; various inserts; free vertical, rotational, and fore/aft adjustment. Its base has M6 countersunk holes for optical breadboards, stages, or tables. A large rectangular insert-clamping arm at the top has a rectangular recess accepting different slide sample holders. The support raises/lowers and rotates installed slides through 360° with 5° resolution. Vertical range varies by model; see individual model specifications. This series is compatible with equivalent Thorlabs products. Large rectangular insert-clamping arm. Model: IMA-SA4. Fits 66 mm rail series and various slide clamps; surface M6 threads mount experimental components. JCOPTIX IMA-SA4 supports M6 countersunk or dovetail mounting. Dovetail mounting provides approximately 50.2 mm travel along the guide. Rated load is 9 kg. An upper square locating recess accepts various square slide sample holders. M3 and M6 threaded holes allow mounting other equipment. Four-position slide clamp. Model: IMA-SA1713F. 4 slide positions; for upright/inverted microscopes; 3 leveling set screws. JCOPTIX IMA-SA1713F has a 140 mm × 65 mm rectangular opening and four slots above it for 76.5 mm × 26.2 mm slides. The four corners carry 4 captive M3 mounting screws. For applications requiring precise sample leveling, three M4×0.5 threaded set screws adjust level. During installation, ensure set screws do not protrude below the holder and damage the platform or sample. Slide holder with central SM2 through-thread, 60 mm cage compatibility, and clamp plates. Model: IMA-SA1713. Slide clamps on both sides; central SM2 threaded hole; 3 leveling set screws. IMA-SA1713 has a central SM2 threaded hole surrounded by 60 mm cage mounting threads, 4-40UNC, for 60 mm cage systems. A central slide recess requires removal of the MTC-SM2E tube protection cover before placing a slide. Side clamp plates can move to opposing symmetric mounting holes. After prolonged use, a tool can adjust the U-shaped opening in the clamp-plate sleeve to restore clamping. Four corners carry 4 captive M3 mounting screws. Three threaded set screws precisely adjust level. Ensure these do not protrude below the holder during installation, to avoid damaging the platform or sample.

Specification Snapshot
Weight
0.62 kg
Request a Quote Download Datasheet
Save to Favorites Save to Favorites

Overview

JCOPTIX external sample supports offer multiple heights for different microscopy applications, improving setup and experimental flexibility. The compact structure leaves ample room for objectives, patch clamps, condensers, and other equipment. Matching posts rotate through 360° for precise component alignment in imaging paths, with angular markings providing 5° adjustment increments. The rigid, stable structure accepts slides, dishes, recording chambers, patch clamps, multiwell plates, and common electrophysiology accessories, fitting most experimental platforms. Complete manual rigid-support sets or individual parts are available; each set includes a post holder, post, and rail or insert clamp. Inserts, slide clamps, and other expansion accessories are also available. Manual Z-axis rigid support. Model: IMA-ESH1. For upright or inverted microscopes; accepts 66 mm rail-series accessories; multiple heights; various inserts; free vertical, rotational, and fore/aft adjustment. Its base has M6 countersunk holes for optical breadboards, stages, or tables. A large rectangular insert-clamping arm at the top has a rectangular recess accepting different slide sample holders. The support raises/lowers and rotates installed slides through 360° with 5° resolution. Vertical range varies by model; see individual model specifications. This series is compatible with equivalent Thorlabs products. Large rectangular insert-clamping arm. Model: IMA-SA4. Fits 66 mm rail series and various slide clamps; surface M6 threads mount experimental components. JCOPTIX IMA-SA4 supports M6 countersunk or dovetail mounting. Dovetail mounting provides approximately 50.2 mm travel along the guide. Rated load is 9 kg. An upper square locating recess accepts various square slide sample holders. M3 and M6 threaded holes allow mounting other equipment. Four-position slide clamp. Model: IMA-SA1713F. 4 slide positions; for upright/inverted microscopes; 3 leveling set screws. JCOPTIX IMA-SA1713F has a 140 mm × 65 mm rectangular opening and four slots above it for 76.5 mm × 26.2 mm slides. The four corners carry 4 captive M3 mounting screws. For applications requiring precise sample leveling, three M4×0.5 threaded set screws adjust level. During installation, ensure set screws do not protrude below the holder and damage the platform or sample. Slide holder with central SM2 through-thread, 60 mm cage compatibility, and clamp plates. Model: IMA-SA1713. Slide clamps on both sides; central SM2 threaded hole; 3 leveling set screws. IMA-SA1713 has a central SM2 threaded hole surrounded by 60 mm cage mounting threads, 4-40UNC, for 60 mm cage systems. A central slide recess requires removal of the MTC-SM2E tube protection cover before placing a slide. Side clamp plates can move to opposing symmetric mounting holes. After prolonged use, a tool can adjust the U-shaped opening in the clamp-plate sleeve to restore clamping. Four corners carry 4 captive M3 mounting screws. Three threaded set screws precisely adjust level. Ensure these do not protrude below the holder during installation, to avoid damaging the platform or sample.

Specifications

ParameterValue
Body Material6061-T6 aluminum alloy
Surface TreatmentBlack Anodized
Platform Dimensions310 mm × 150 mm
Weight0.62 kg
Bottom Dovetail SpecificationsFor 66 Rail Series
Mounting MethodDovetail or M6 Tapped Hole
Microscope Slide Bracket Mounting Hole SpecificationsM3

Key Features

External Adjustable Rigid Support with 360° Rotation and 5° Rotational Resolution; Front/Rear Telescopic Travel 50.2 mm; Supports Slide Holders and Experimental Sample Stages; For Upright or Inverted Microscopes; Accepts Various Inserts and Slide Holders.

Datasheet

Please provide your email to download the datasheet.

Your name
Email Address

Invalid email format. Please try again.

Send Request

Supplier Information

Jc
Jcoptix
View Supplier →
Nanjing Jingcui Optical Technology Co., Ltd. (formerly Suzhou Jingcui Optical Technology Co., Ltd., abbreviated as JCOPTIX) is a national high-tech enterprise and a national-level specialized and sophisticated 'little giant' enterprise, established on the foundation of the Liquid Crystal and Photonics Research Center of Nanjing University. It engages in R&D, manufacturing, and sales of advanced optical technologies and products. JCOPTIX is dedicated to building a product platform for China's optical community, offering liquid crystal photonics components, precision optical components, optomechanics, fiber optic assemblies, motion control devices, and system solutions. All listed products can be found and ordered online at www.JCOPTIX.com.

Request a Quote

Our team responds within 24–48 hours
External Sample Holder IMA-SA4
Jcoptix · Microscope Accessories
Direct from Manufacturer
Your inquiry will be sent directly to the manufacturer
Photonics Source Platform
We handles the inquiry on your behalf
Your information is protected and will never be shared without consent.
Datasheet Live Chat
Contact Us

Loading...

GetExperimental Plan

Name

Phone

+86

Organization

Use Case

Global Photonics Products
Database Platform
With 16 years of experience, we provide high-quality products and services to universities, research institutes, and industry.
50+ Detailed Categories · 3,000+ Global Brands · 100,000+ Photonics Products
1 Million+
In-depth analysis of professional academic resources in photonics
300,000
ProductsDatasheets Available Free
We will keep your personal information strictly confidential.

Product Quote

+86
* Select the quoting party:
By submitting, you agree to the User Service Agreement and Privacy Policy
AI Parametric Selection
Smart Match · Precise Recs
Enter Specifications
AI Smart Matching
Get Best Matches
Skip Manual Comparison
Find Best Solutions Fast
Select Now →
China's Leading Optoelectronics Platform