Cuvette Holder ASA-R4
JCOPTIX cuvette holders accept standard micro and large cuvettes for fiber or free-space applications. Compatible cuvette dimensions are 12.5 mm × 12.5 mm × 45 mm (0.49 inch × 0.49 inch × 1.77 inch). Optical ports on four sides provide two perpendicular paths for transmission and fluorescence measurements. Cuvette holder with three filter holders. Model: ASA-R4. Compatible with 30 mm systems; bottom M6 hole. Three filter holders included. Compatible with SM1 tubes and adapters. JCOPTIX holders include four interchangeable SMA905 fiber interfaces and three filter holders for absolute absorbance or fluorescence spectroscopy of aqueous solutions. They accept 12.5 mm × 12.5 mm × 45 mm cuvettes with a Z dimension of 8.5 mm. Each housing side has an SMA905 interface; the three sides other than the input also have SM1 interfaces for SM1 tubes and adapters. Four-sided 4-40 holes connect to 30 mm systems. Four base M6 countersunk holes mount to breadboards or tables. Removing the base exposes a bottom M6 hole for free-space installation. Cuvette holder with one filter holder. Model: ASA-R5. Compatible with 30 mm systems; bottom M6 hole. One filter holder included. Compatible with SM1 tubes and adapters. Compact JCOPTIX holders include an interchangeable SMA fiber adapter and one filter holder for absolute absorbance/fluorescence spectroscopy of aqueous solutions. They accept 12.5 mm × 12.5 mm × 45 mm cuvettes with an 8.5 mm Z dimension. Each of four sides has an SM1 interface for SM1 tubes/adapters and 4-40 holes for 30 mm systems. A bottom M6 hole enables free-space installation.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Body Material | 6061-T6 aluminum alloy |
| Surface Treatment | Black Anodized |
| Operating Wavelength | 200-2500 nm |
| Interface Type | SMA905 |
| Compatible Cuvette | 1 cm Optical Path Length |
| Collimating lens | D=5.0 mm、F=10.0 mm |
| Body Dimensions (L × W × H) | 92 mm × 92 mm × 75 mm |
| Bottom Thread Specification | M6 Tapped Hole / M6 Countersunk Hole |
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
Flow Cell Optical Cells Sjllaser
-
Quartz Cuvette Optical Cells Lbjx-trigon-optics
-
CF Vacuum Flange CF16 Optical Cells Fiberock
Flange Outer Diameter: 34.00 mm Flange Thickness: 7.30 mm Bolt Circle Diameter: 27.00 mm
CF, or Conflat Flange, is a high-vacuum connection using static metal seals and capable of high-temperature bakeout2. Pressure ranges from a minimum <10-12 hPa to ambient. Nominal diameters include 16, 40, 63, 100, 160, 200, 2502. Applicable vacuum reaches 10^-12 mbar2. Seal materials are generally Viton, PTFE, or oxygen-free copper; flanges generally use 304 or 316 stainless steel. Fixed flanges are one-piece. Loose/rotatable flanges comprise a knife edge compressing copper gaskets and a bolt-retaining section. Through-holes require bolts and nuts; threaded holes accept bolts directly. Main materials are SUS304 or SUS304L because SUS304 outgasses little and is readily machined/welded. Installation is demanding. Copper gaskets deform under compression, so tighten bolts evenly. Uneven forces lift diagonally opposite flange areas and cause leakage. Approximate torques: M4: 20kgf·cm; M6: 70kgf·cm; M8: 100kgf·cm. Genderless CF flanges and copper gaskets are all metal and withstand bakeout above 250℃. Disadvantages are high cost and nonreusable copper gaskets. CF series: readily recognizable seals mainly serve ultrahigh vacuum, using copper-gasket metal sealing. After one use, gasket sealing deteriorates substantially; high-vacuum systems require gasket replacement after every disassembly. Standard sizes such as CF35 and matching standard copper gaskets are available.
-
CF Vacuum Flange CF25 Optical Cells Fiberock
Flange Outer Diameter: 54.00 mm Flange Thickness: 10.50 mm Bolt Circle Diameter: 43.00 mm
CF, or Conflat Flange, is a high-vacuum connection using static metal seals and capable of high-temperature bakeout2. Pressure ranges from a minimum <10-12 hPa to ambient. Nominal diameters include 16, 40, 63, 100, 160, 200, 2502. Applicable vacuum reaches 10^-12 mbar2. Seal materials are generally Viton, PTFE, or oxygen-free copper; flanges generally use 304 or 316 stainless steel. Fixed flanges are one-piece. Loose/rotatable flanges comprise a knife edge compressing copper gaskets and a bolt-retaining section. Through-holes require bolts and nuts; threaded holes accept bolts directly. Main materials are SUS304 or SUS304L because SUS304 outgasses little and is readily machined/welded. Installation is demanding. Copper gaskets deform under compression, so tighten bolts evenly. Uneven forces lift diagonally opposite flange areas and cause leakage. Approximate torques: M4: 20kgf·cm; M6: 70kgf·cm; M8: 100kgf·cm. Genderless CF flanges and copper gaskets are all metal and withstand bakeout above 250℃. Disadvantages are high cost and nonreusable copper gaskets. CF series: readily recognizable seals mainly serve ultrahigh vacuum, using copper-gasket metal sealing. After one use, gasket sealing deteriorates substantially; high-vacuum systems require gasket replacement after every disassembly. Standard sizes such as CF35 and matching standard copper gaskets are available.
-
CF Vacuum Flange CF35 Optical Cells Fiberock
Flange Outer Diameter: 70.00 mm Flange Thickness: 13.00 mm Bolt Circle Diameter: 58.70 mm
CF, or Conflat Flange, is a high-vacuum connection using static metal seals and capable of high-temperature bakeout2. Pressure ranges from a minimum <10-12 hPa to ambient. Nominal diameters include 16, 40, 63, 100, 160, 200, 2502. Applicable vacuum reaches 10^-12 mbar2. Seal materials are generally Viton, PTFE, or oxygen-free copper; flanges generally use 304 or 316 stainless steel. Fixed flanges are one-piece. Loose/rotatable flanges comprise a knife edge compressing copper gaskets and a bolt-retaining section. Through-holes require bolts and nuts; threaded holes accept bolts directly. Main materials are SUS304 or SUS304L because SUS304 outgasses little and is readily machined/welded. Installation is demanding. Copper gaskets deform under compression, so tighten bolts evenly. Uneven forces lift diagonally opposite flange areas and cause leakage. Approximate torques: M4: 20kgf·cm; M6: 70kgf·cm; M8: 100kgf·cm. Genderless CF flanges and copper gaskets are all metal and withstand bakeout above 250℃. Disadvantages are high cost and nonreusable copper gaskets. CF series: readily recognizable seals mainly serve ultrahigh vacuum, using copper-gasket metal sealing. After one use, gasket sealing deteriorates substantially; high-vacuum systems require gasket replacement after every disassembly. Standard sizes such as CF35 and matching standard copper gaskets are available.
Related Articles
For semiconductor, coating and laboratory vacuum chambers, thermal conductivity gauges suffer large measurement errors caused by gas type and ambient temperature.
Founded in Beijing in 2011, Beijing FJR Opto-electronic Technology Co., Ltd. specializes in R&D, manufacturing and sales of infrared thermal imaging equipment and complete optoelectronic systems.
A microlens array (MLA) is a high-precision optical component composed of hundreds or thousands of tiny, uniformly arranged micro lenses on a single flat substrate. Unlike traditional single lenses that focus one light beam, a microlens array can split, homogenize, and reshape light on a micro scale. It is widely paired with VCSELs, lasers, and image sensors, becoming a core part of modern miniature optical systems.
A laser bar is an array semiconductor laser chip integrated with dozens of emitters, which realizes hundred-watt quasi-continuous output on a single chip. With regular emitter arrangement and controllable fill factor, integrated thermal design and superior wall-plug efficiency compared to single chips, it acts as the core light source for high-power pumping, medical lasers and precision processing.
Loading...
Name
Phone
Organization
Use Case
Database Platform