Height-Adjustable Mount MMV-4F
JCOPTIX height-adjustable mounts clamp round or rectangular optics. Loosen locking screws at both top-plate sides to adjust height quickly; an adjustable top screw supplies vertical holding force. MMV-4F is for round optics; MMS-2F for rectangular optics. All have bottom M4 holes for 12.7 mm posts. V-mount. Model: MMV-4F. Holds round optics. Diameter: Ø6-100 mm. Bottom M4 mounting hole. JCOPTIX V-mounts accept Ø6-100 mm optics up to 6.6 mm thick. Loosen side top-plate screws for quick height adjustment; the adjustable top screw supplies vertical holding force. The base V-groove secures round optics. Bottom M4 holes mount to 12.7 mm posts. Rectangular mount. Model: MMS-2F. Holds rectangular optics. Maximum size: 68 mm × 65 mm. Bottom M4 holes and M6 countersunk slots. JCOPTIX mounts hold rectangular optics up to 68 mm × 65 mm and 12 mm thick. Loosen locking screws at both top-plate sides to adjust height; the adjustable top screw supplies vertical holding force. Top-plate/base shoulders quickly align rectangular optics. Rubber contact pads prevent damage. Bottom M4 holes and M6 countersunk slots mount to 12.7 mm posts or directly to standard breadboards.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Body Material | 6061-T6 |
| Surface Treatment | Black Anodized |
| Maximum Clamped Optic Thickness | 6.6 mm |
| Clamped Optic Diameter | Ø6-100 mm |
| Mounting Method | M4 Threaded Hole |
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
Photoelectric switch Accessories Central-laser
Output form [Model=T3X-R18N]: NPN Output form [Model=T3X-R18P]: PNP Light Source [Shared by T3X-R18N/T3X-R18P (original merged columns)]: Red light-emitting diode LED
Photoelectric switch: compact, versatile, long-lived, accurate, fast-responding, and capable of long-distance detection, with strong resistance to optical, electrical, and magnetic interference. NPN (T3X-R18N) or PNP (T3X-R18P) outputs are available, with LIGHT-ON/DARK-ON selection and delay/timing functions.
-
Rotary axis (CK-ROT-M-80) Accessories Central-laser
Rotary axis dimensions [Model=CK-ROT-M-80]: 185 mm × 160 mm × 120 mm Rotary axis weight [Model=CK-ROT-M-80]: 4.95 kg Standard jaw clamping range [Model=CK-ROT-M-80]: 2~22 mm
Rotary-axis device CK-ROT-M-80 includes a driver, power supply, motor, and three-jaw chuck and works when connected to a laser-marking machine. Compact, stable, and detachable, with upward tilt to 90°, driver resolution of 0.009°, and round-head runout accuracy ≤0.04mm. Suitable for cylindrical-surface marking, circular text, jewelry, and graduated dials.
-
Rotary axis (CR-80/CR-100) Accessories Central-laser
Surface treatment [General table for the CR series]: Anodized Dimensions [General table for the CR series]: 295.9 mm × 285 mm × 223 mm Shaft-center height [General table for the CR series; Measured in horizontal placement]: 105 mm
CR-series high-speed rotary workholding fixture with 0–90° tilt: precision chuck and servo drive, freely adjustable and lockable working angle, suitable for marking, cutting, welding, and engraving. Optional chuck diameters are 80/100/125/160, with no diameter unit stated here; maximum load is 30kg.
-
Fume purifier, unit type (source wording) Accessories Central-laser
Air inlet interface [Model=CK-SP-S]: Φ75 Input Voltage [Model=CK-SP-S; 50/60HZ]: AC220 Rated Power [Model=CK-SP-S]: 200 W
Unit-type fume purifier, following the source wording: four-stage filtration, an efficient low-noise brushless DC motor, and a flexible extraction arm. Removes fumes and dust from laser marking, welding, and similar processes to improve the working environment.
-
Dual-position fume purifier Accessories Central-laser
Air inlet interface [Model=CK-SP-S200]: Φ75 Input Voltage [Model=CK-SP-S200; 50/60HZ]: AC220 Rated Power [Model=CK-SP-S200]: 150~200 W
Dual-position fume purifier with four-stage filtration, an efficient low-noise brushless DC motor, and a flexible extraction arm. Removes fumes and dust from laser marking, welding, and similar processes to improve the working environment.
Related Articles
Macro channel water-cooled stacked laser diodes integrate dozens of laser bars into one vertical stacked module with large-diameter macro flow cooling channels.
The CNGE 384 uncooled infrared core module is a high-performance core component for thermal imaging systems. Adopting mature uncooled infrared detection technology, it realizes all-weather thermal radiation perception and high-definition imaging without refrigeration equipment.
VCSEL, short for Vertical Cavity Surface Emitting Laser, is a widely used semiconductor laser component in modern optoelectronics. Unlike traditional edge-emitting lasers, VCSEL emits laser light vertically from its chip surface. Thanks to its low power consumption, stable beam quality, low cost, and easy integration, it has become the core light source for 3D sensing, wearable devices, and high-speed optical communication.
Founded in Beijing in 2011, Beijing FJR Opto-electronic Technology Co., Ltd. specializes in R&D, manufacturing and sales of infrared thermal imaging equipment and complete optoelectronic systems.
Loading...
Name
Phone
Organization
Use Case
Database Platform