Locking Ring SM2NTA
JCOPTIX locking rings secure lens tubes or connecting components and adjust their relative positions and angles. Black-anodized 6061-T6 aluminum-alloy rings fit SM05, SM1, and SM2 externally threaded optomechanics. Four radial wrench slots enable easy installation/removal with matching wrenches. Wrench tightening gives greater locking force and more reliable positioning, while easing removal. SM-series internally threaded locking rings with wrench slots. Models: SM05NTA, SM1NTA, SM2NTA. SM internal threads and 4 evenly spaced radial slots. Lock SM05 tubes or connecting components and adjust relative position/angle. JCOPTIX black-anodized 6061-T6 SM internally threaded rings lock SM05, SM1, and SM2 tubes or components and adjust their positions/angles. Four slots are evenly distributed. SM05NTA and SM1NTA use an MBT-SWS1 spanner, not included. SM2NTA uses an MBT-SWS2 spanner, not included. SM05 external locking ring for SM05 external threads. Model: SM05NT. For lens tubes and adapters. Slim 2.8 mm design for more applications. SM05 internal threads. JCOPTIX SM05 external rings work with SM05 tubes and adapters; their 2.8 mm slim design suits many other locations requiring SM05 rings. SM1 external locking ring for SM1 external threads. Model: SM1NT. For lens tubes and adapters. Slim 2.8 mm design. SM1 internal threads. JCOPTIX SM1 external rings work with SM1 tubes and adapters; their 2.8 mm slim design suits many locations requiring SM1 rings. SM2 external locking ring for SM2 external threads. Model: SM2NT. For lens tubes and adapters. Slim 2.8 mm design. SM2 internal threads. JCOPTIX SM2 external rings work with SM2 tubes and adapters; their 2.8 mm slim design suits many locations requiring SM2 rings.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Body Material | 6061-T6 |
| Surface Treatment | Black Anodized |
| Thickness | 2.8 mm |
| Thread specification | SM2 Internal Thread |
| Wrench Slot Specifications | 2.8 mm × 2.8 mm |
| Compatible retaining ring spanner model (not included) | MBT-SWS2 |
| General Parameters - Thread Type | SM Series Internal Thread |
| General Parameters - Outer Diameter Notch | 2.8 mm × 2.8 mm Wrench Slot |
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
Photoelectric switch Accessories Central-laser
Output form [Model=T3X-R18N]: NPN Output form [Model=T3X-R18P]: PNP Light Source [Shared by T3X-R18N/T3X-R18P (original merged columns)]: Red light-emitting diode LED
Photoelectric switch: compact, versatile, long-lived, accurate, fast-responding, and capable of long-distance detection, with strong resistance to optical, electrical, and magnetic interference. NPN (T3X-R18N) or PNP (T3X-R18P) outputs are available, with LIGHT-ON/DARK-ON selection and delay/timing functions.
-
Rotary axis (CK-ROT-M-80) Accessories Central-laser
Rotary axis dimensions [Model=CK-ROT-M-80]: 185 mm × 160 mm × 120 mm Rotary axis weight [Model=CK-ROT-M-80]: 4.95 kg Standard jaw clamping range [Model=CK-ROT-M-80]: 2~22 mm
Rotary-axis device CK-ROT-M-80 includes a driver, power supply, motor, and three-jaw chuck and works when connected to a laser-marking machine. Compact, stable, and detachable, with upward tilt to 90°, driver resolution of 0.009°, and round-head runout accuracy ≤0.04mm. Suitable for cylindrical-surface marking, circular text, jewelry, and graduated dials.
-
Rotary axis (CR-80/CR-100) Accessories Central-laser
Surface treatment [General table for the CR series]: Anodized Dimensions [General table for the CR series]: 295.9 mm × 285 mm × 223 mm Shaft-center height [General table for the CR series; Measured in horizontal placement]: 105 mm
CR-series high-speed rotary workholding fixture with 0–90° tilt: precision chuck and servo drive, freely adjustable and lockable working angle, suitable for marking, cutting, welding, and engraving. Optional chuck diameters are 80/100/125/160, with no diameter unit stated here; maximum load is 30kg.
-
Fume purifier, unit type (source wording) Accessories Central-laser
Air inlet interface [Model=CK-SP-S]: Φ75 Input Voltage [Model=CK-SP-S; 50/60HZ]: AC220 Rated Power [Model=CK-SP-S]: 200 W
Unit-type fume purifier, following the source wording: four-stage filtration, an efficient low-noise brushless DC motor, and a flexible extraction arm. Removes fumes and dust from laser marking, welding, and similar processes to improve the working environment.
-
Dual-position fume purifier Accessories Central-laser
Air inlet interface [Model=CK-SP-S200]: Φ75 Input Voltage [Model=CK-SP-S200; 50/60HZ]: AC220 Rated Power [Model=CK-SP-S200]: 150~200 W
Dual-position fume purifier with four-stage filtration, an efficient low-noise brushless DC motor, and a flexible extraction arm. Removes fumes and dust from laser marking, welding, and similar processes to improve the working environment.
Related Articles
Macro channel water-cooled stacked laser diodes integrate dozens of laser bars into one vertical stacked module with large-diameter macro flow cooling channels.
The CNGE 384 uncooled infrared core module is a high-performance core component for thermal imaging systems. Adopting mature uncooled infrared detection technology, it realizes all-weather thermal radiation perception and high-definition imaging without refrigeration equipment.
VCSEL, short for Vertical Cavity Surface Emitting Laser, is a widely used semiconductor laser component in modern optoelectronics. Unlike traditional edge-emitting lasers, VCSEL emits laser light vertically from its chip surface. Thanks to its low power consumption, stable beam quality, low cost, and easy integration, it has become the core light source for 3D sensing, wearable devices, and high-speed optical communication.
Founded in Beijing in 2011, Beijing FJR Opto-electronic Technology Co., Ltd. specializes in R&D, manufacturing and sales of infrared thermal imaging equipment and complete optoelectronic systems.
Loading...
Name
Phone
Organization
Use Case
Database Platform