Fixed V-Shaped Mount MMV-1F
JCOPTIX fixed V-mounts commonly clamp cylindrical or rectangular optical/mechanical components. Three types hold cylinder diameters of 1-22 mm, 10-50 mm, and 12.5-76.5 mm. All have bottom M4 mounting holes for standard optomechanics such as posts. MMV-2F has bottom M4 holes and four M6 countersunk holes for post or breadboard mounting. Fixed V-mounts. Models: MMV-1F, MMV-2F, MMV-3F. Clamp cylindrical optical/mechanical components. Base M4 holes or M6 countersunk holes. Clamping arms included. JCOPTIX offers three mounts for different cylindrical optic diameters. MMV-1F has bottom and left-side M4 holes for 12.7 mm posts or other standard optomechanics. Its small adjustable clamping arm and rubber-tipped screw extension accommodate Ø1-22 mm cylinders. MMV-2F has bottom M4 holes and M6 countersunk holes for 12.7 mm posts or breadboards. Its large adjustable arm and rubber-tipped screw extension accommodate Ø10-50 mm cylinders. MMV-3F has bottom/side M6 threaded and M6 countersunk holes for 25 mm posts and breadboards. Adjusting its arm height and rubber-tipped screw extension accommodates Ø12.5-76.5 mm cylinders. V-mount. Model: MMV-4F. Holds round optics. Diameter: Ø6-100 mm. Bottom M4 mounting hole. JCOPTIX V-mounts accept Ø6-100 mm optics up to 6.6 mm thick. Loosen locking screws at both top-plate sides to quickly adjust height; an adjustable top screw supplies vertical holding force. The base V-groove effectively secures round optics. A bottom M4 hole mounts to 12.7 mm posts.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Body Material | 6061-T6 aluminum alloy |
| Surface Treatment | Black Anodized |
| Clampable Element Diameter | Ø1-22 mm |
| Included Clamping Arm | MMA-CA1 |
| Bottom Mounting Hole Specifications/Quantity | M4 / 1 Piece |
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
Photoelectric switch Accessories Central-laser
Output form [Model=T3X-R18N]: NPN Output form [Model=T3X-R18P]: PNP Light Source [Shared by T3X-R18N/T3X-R18P (original merged columns)]: Red light-emitting diode LED
Photoelectric switch: compact, versatile, long-lived, accurate, fast-responding, and capable of long-distance detection, with strong resistance to optical, electrical, and magnetic interference. NPN (T3X-R18N) or PNP (T3X-R18P) outputs are available, with LIGHT-ON/DARK-ON selection and delay/timing functions.
-
Rotary axis (CK-ROT-M-80) Accessories Central-laser
Rotary axis dimensions [Model=CK-ROT-M-80]: 185 mm × 160 mm × 120 mm Rotary axis weight [Model=CK-ROT-M-80]: 4.95 kg Standard jaw clamping range [Model=CK-ROT-M-80]: 2~22 mm
Rotary-axis device CK-ROT-M-80 includes a driver, power supply, motor, and three-jaw chuck and works when connected to a laser-marking machine. Compact, stable, and detachable, with upward tilt to 90°, driver resolution of 0.009°, and round-head runout accuracy ≤0.04mm. Suitable for cylindrical-surface marking, circular text, jewelry, and graduated dials.
-
Rotary axis (CR-80/CR-100) Accessories Central-laser
Surface treatment [General table for the CR series]: Anodized Dimensions [General table for the CR series]: 295.9 mm × 285 mm × 223 mm Shaft-center height [General table for the CR series; Measured in horizontal placement]: 105 mm
CR-series high-speed rotary workholding fixture with 0–90° tilt: precision chuck and servo drive, freely adjustable and lockable working angle, suitable for marking, cutting, welding, and engraving. Optional chuck diameters are 80/100/125/160, with no diameter unit stated here; maximum load is 30kg.
-
Fume purifier, unit type (source wording) Accessories Central-laser
Air inlet interface [Model=CK-SP-S]: Φ75 Input Voltage [Model=CK-SP-S; 50/60HZ]: AC220 Rated Power [Model=CK-SP-S]: 200 W
Unit-type fume purifier, following the source wording: four-stage filtration, an efficient low-noise brushless DC motor, and a flexible extraction arm. Removes fumes and dust from laser marking, welding, and similar processes to improve the working environment.
-
Dual-position fume purifier Accessories Central-laser
Air inlet interface [Model=CK-SP-S200]: Φ75 Input Voltage [Model=CK-SP-S200; 50/60HZ]: AC220 Rated Power [Model=CK-SP-S200]: 150~200 W
Dual-position fume purifier with four-stage filtration, an efficient low-noise brushless DC motor, and a flexible extraction arm. Removes fumes and dust from laser marking, welding, and similar processes to improve the working environment.
Related Articles
Macro channel water-cooled stacked laser diodes integrate dozens of laser bars into one vertical stacked module with large-diameter macro flow cooling channels.
The CNGE 384 uncooled infrared core module is a high-performance core component for thermal imaging systems. Adopting mature uncooled infrared detection technology, it realizes all-weather thermal radiation perception and high-definition imaging without refrigeration equipment.
VCSEL, short for Vertical Cavity Surface Emitting Laser, is a widely used semiconductor laser component in modern optoelectronics. Unlike traditional edge-emitting lasers, VCSEL emits laser light vertically from its chip surface. Thanks to its low power consumption, stable beam quality, low cost, and easy integration, it has become the core light source for 3D sensing, wearable devices, and high-speed optical communication.
Founded in Beijing in 2011, Beijing FJR Opto-electronic Technology Co., Ltd. specializes in R&D, manufacturing and sales of infrared thermal imaging equipment and complete optoelectronic systems.
Loading...
Name
Phone
Organization
Use Case
Database Platform