Coaxial Orthogonal Turning Plate MCOM-30RAQ
JCOPTIX orthogonal cage plates have central SM1 (1.035"-40) holes for Ø25.4 mm optics/SM1 tubes, supporting cage construction and quick alignment. Front/side holes include 8 Ø6 mm rod bores. With 6 MCR rods, they join two 30 mm systems orthogonally or convert 30 mm to 60 mm, with side screws securing rods. Snap-in orthogonal plate, 30 mm to 30 mm. Model: MCOM-30RAQ. Central SM1 (1.035"-40) hole. Flexure locking, quick installation/removal. JCOPTIX plates join 30 mm to 30 mm orthogonally. Front: 4 Ø6 mm blind holes; side: 4 M4 cage holes with screws; rear: 4 flexure-locking Ø6 mm holes. Snap directly onto two Ø6 mm rods, slide to position, and flexure-lock with side screws without dismantling. Orthogonal plate, 30 mm to 30 mm. Model: MCOM-30RA. Central SM1 (1.035"-40) hole. Flexure locking, flexure locking; quick installation/removal. JCOPTIX joins 30 mm to 30 mm. Front: 4 Ø6 mm blind holes; side: 4 M4 cage holes with screws; rear: 4 Ø6 mm flexure-locking through-holes. Insert rods, slide, and flexure-lock using side screws described as Ø6 mm. Orthogonal plate, 30 mm to 60 mm. Model: MCOM-60RA. Central SM1 (1.035"-40) hole. Orthogonal 30 mm-to-60 mm connection. Side locking screws. JCOPTIX central SM1 (1.035"-40) holes accept Ø25.4 mm optics/SM1 tubes. Front and side each have 4 Ø6 mm holes. MCR rods orthogonally connect 30 mm and 60 mm systems, each secured by side screws.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Body Material | 6061-T6 |
| Surface Treatment | Black Anodized |
| Maximum Compatible Optic Thickness | 6 mm |
| Clear Aperture Dimension | Ø23 mm |
| Mounting Method | Dual Retaining Ring Fixing |
| Compatible Post Diameter | 6 mm |
| Compatible optical element diameter | Ø25.4 mm |
| Compatible Cage System [For Connecting a 30 mm Coaxial System to a 30 mm Coaxial System, Not the Turning Plate's Own Length] | 30 mm Cage System to 30 mm Cage System |
| Center hole specification | SM1 Tapped Hole |
| Cage Rod Locking Screw Specifications | M4 |
| Included Retaining Ring Specifications and Quantity | 2 SM1 Retaining Rings |
| Compatible retaining ring spanner model (not included) | MBT-SM1 |
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
Photoelectric switch Accessories Central-laser
Output form [Model=T3X-R18N]: NPN Output form [Model=T3X-R18P]: PNP Light Source [Shared by T3X-R18N/T3X-R18P (original merged columns)]: Red light-emitting diode LED
Photoelectric switch: compact, versatile, long-lived, accurate, fast-responding, and capable of long-distance detection, with strong resistance to optical, electrical, and magnetic interference. NPN (T3X-R18N) or PNP (T3X-R18P) outputs are available, with LIGHT-ON/DARK-ON selection and delay/timing functions.
-
Rotary axis (CK-ROT-M-80) Accessories Central-laser
Rotary axis dimensions [Model=CK-ROT-M-80]: 185 mm × 160 mm × 120 mm Rotary axis weight [Model=CK-ROT-M-80]: 4.95 kg Standard jaw clamping range [Model=CK-ROT-M-80]: 2~22 mm
Rotary-axis device CK-ROT-M-80 includes a driver, power supply, motor, and three-jaw chuck and works when connected to a laser-marking machine. Compact, stable, and detachable, with upward tilt to 90°, driver resolution of 0.009°, and round-head runout accuracy ≤0.04mm. Suitable for cylindrical-surface marking, circular text, jewelry, and graduated dials.
-
Rotary axis (CR-80/CR-100) Accessories Central-laser
Surface treatment [General table for the CR series]: Anodized Dimensions [General table for the CR series]: 295.9 mm × 285 mm × 223 mm Shaft-center height [General table for the CR series; Measured in horizontal placement]: 105 mm
CR-series high-speed rotary workholding fixture with 0–90° tilt: precision chuck and servo drive, freely adjustable and lockable working angle, suitable for marking, cutting, welding, and engraving. Optional chuck diameters are 80/100/125/160, with no diameter unit stated here; maximum load is 30kg.
-
Fume purifier, unit type (source wording) Accessories Central-laser
Air inlet interface [Model=CK-SP-S]: Φ75 Input Voltage [Model=CK-SP-S; 50/60HZ]: AC220 Rated Power [Model=CK-SP-S]: 200 W
Unit-type fume purifier, following the source wording: four-stage filtration, an efficient low-noise brushless DC motor, and a flexible extraction arm. Removes fumes and dust from laser marking, welding, and similar processes to improve the working environment.
-
Dual-position fume purifier Accessories Central-laser
Air inlet interface [Model=CK-SP-S200]: Φ75 Input Voltage [Model=CK-SP-S200; 50/60HZ]: AC220 Rated Power [Model=CK-SP-S200]: 150~200 W
Dual-position fume purifier with four-stage filtration, an efficient low-noise brushless DC motor, and a flexible extraction arm. Removes fumes and dust from laser marking, welding, and similar processes to improve the working environment.
Related Articles
Macro channel water-cooled stacked laser diodes integrate dozens of laser bars into one vertical stacked module with large-diameter macro flow cooling channels.
The CNGE 384 uncooled infrared core module is a high-performance core component for thermal imaging systems. Adopting mature uncooled infrared detection technology, it realizes all-weather thermal radiation perception and high-definition imaging without refrigeration equipment.
VCSEL, short for Vertical Cavity Surface Emitting Laser, is a widely used semiconductor laser component in modern optoelectronics. Unlike traditional edge-emitting lasers, VCSEL emits laser light vertically from its chip surface. Thanks to its low power consumption, stable beam quality, low cost, and easy integration, it has become the core light source for 3D sensing, wearable devices, and high-speed optical communication.
Founded in Beijing in 2011, Beijing FJR Opto-electronic Technology Co., Ltd. specializes in R&D, manufacturing and sales of infrared thermal imaging equipment and complete optoelectronic systems.
Loading...
Name
Phone
Organization
Use Case
Database Platform