30 mm Coaxial System Rods and Accessories MCR-10-P4
JCOPTIX coaxial rods and accessories offer high dimensional accuracy and stable quality for 30 mm and 60 mm systems. Rotatable coaxial rods for 30 mm and 60 mm systems. Model: MCA-C3A. Rotation range: 180°. Lockable angle. Sold in sets of four. JCOPTIX Ø6 mm rotating rods connect two precision-machined, polished Ø6 mm rods with a screw for 180° rotation. Tighten with a 2 mm hex key at the required position. Both ends of Ø6 mm rotatable rods have US 4-40 holes. Rotating rod couplers for 30 mm and 60 mm systems. Model: MCA-C2A. Rotation range: 180°. Lockable. Sold in sets of four. Precision-machined, polished stainless-steel JCOPTIX couplers connect components at arbitrary angles. Tighten the screw with a 2 mm hex key at the desired position. The rotating rod tip has a US 4-40 hole. Cross rod couplers for 30 mm and 60 mm systems. Model: MCA-C1A. Material: 6061-T6. Fixed angle: 90°. Compatible with Ø6 mm rods. JCOPTIX cross couplers connect multiple Ø6 mm rods at 90°, secured with a 2 mm hex key. Coaxial rod adapters. Models: MCA-4-40-P4, MCA-M3-P4. M3 or 4-40 studs. Side setscrew. JCOPTIX adapters have a stud at one end and an Ø6 mm blind bore at the other. M3 and 4-40 stud options fit 4-40 or M3 internally threaded components, connecting metric and imperial systems. M3 setscrews secure rods for direct rod/component connections. A side Ø1.8 mm through-hole accepts a 1.5 mm wrench for extra tightening.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Body Material | 303 Stainless Steel |
| Surface Treatment | Precision Grinding and Polishing |
| Quantity | 4 |
| Diameter | Ø6 mm |
| Length | 10 Inches (254.0 mm) |
| Screw Specifications at Both Ends | 4-40 × 1/4; Hex Socket Cup-Point Set Screw |
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
Photoelectric switch Accessories Central-laser
Output form [Model=T3X-R18N]: NPN Output form [Model=T3X-R18P]: PNP Light Source [Shared by T3X-R18N/T3X-R18P (original merged columns)]: Red light-emitting diode LED
Photoelectric switch: compact, versatile, long-lived, accurate, fast-responding, and capable of long-distance detection, with strong resistance to optical, electrical, and magnetic interference. NPN (T3X-R18N) or PNP (T3X-R18P) outputs are available, with LIGHT-ON/DARK-ON selection and delay/timing functions.
-
Rotary axis (CK-ROT-M-80) Accessories Central-laser
Rotary axis dimensions [Model=CK-ROT-M-80]: 185 mm × 160 mm × 120 mm Rotary axis weight [Model=CK-ROT-M-80]: 4.95 kg Standard jaw clamping range [Model=CK-ROT-M-80]: 2~22 mm
Rotary-axis device CK-ROT-M-80 includes a driver, power supply, motor, and three-jaw chuck and works when connected to a laser-marking machine. Compact, stable, and detachable, with upward tilt to 90°, driver resolution of 0.009°, and round-head runout accuracy ≤0.04mm. Suitable for cylindrical-surface marking, circular text, jewelry, and graduated dials.
-
Rotary axis (CR-80/CR-100) Accessories Central-laser
Surface treatment [General table for the CR series]: Anodized Dimensions [General table for the CR series]: 295.9 mm × 285 mm × 223 mm Shaft-center height [General table for the CR series; Measured in horizontal placement]: 105 mm
CR-series high-speed rotary workholding fixture with 0–90° tilt: precision chuck and servo drive, freely adjustable and lockable working angle, suitable for marking, cutting, welding, and engraving. Optional chuck diameters are 80/100/125/160, with no diameter unit stated here; maximum load is 30kg.
-
Fume purifier, unit type (source wording) Accessories Central-laser
Air inlet interface [Model=CK-SP-S]: Φ75 Input Voltage [Model=CK-SP-S; 50/60HZ]: AC220 Rated Power [Model=CK-SP-S]: 200 W
Unit-type fume purifier, following the source wording: four-stage filtration, an efficient low-noise brushless DC motor, and a flexible extraction arm. Removes fumes and dust from laser marking, welding, and similar processes to improve the working environment.
-
Dual-position fume purifier Accessories Central-laser
Air inlet interface [Model=CK-SP-S200]: Φ75 Input Voltage [Model=CK-SP-S200; 50/60HZ]: AC220 Rated Power [Model=CK-SP-S200]: 150~200 W
Dual-position fume purifier with four-stage filtration, an efficient low-noise brushless DC motor, and a flexible extraction arm. Removes fumes and dust from laser marking, welding, and similar processes to improve the working environment.
Related Articles
Macro channel water-cooled stacked laser diodes integrate dozens of laser bars into one vertical stacked module with large-diameter macro flow cooling channels.
The CNGE 384 uncooled infrared core module is a high-performance core component for thermal imaging systems. Adopting mature uncooled infrared detection technology, it realizes all-weather thermal radiation perception and high-definition imaging without refrigeration equipment.
VCSEL, short for Vertical Cavity Surface Emitting Laser, is a widely used semiconductor laser component in modern optoelectronics. Unlike traditional edge-emitting lasers, VCSEL emits laser light vertically from its chip surface. Thanks to its low power consumption, stable beam quality, low cost, and easy integration, it has become the core light source for 3D sensing, wearable devices, and high-speed optical communication.
Founded in Beijing in 2011, Beijing FJR Opto-electronic Technology Co., Ltd. specializes in R&D, manufacturing and sales of infrared thermal imaging equipment and complete optoelectronic systems.
Loading...
Name
Phone
Organization
Use Case
Database Platform