25 mm Post Adapter MBA-1C05
JCOPTIX 25 mm post adapters secure to 25 mm posts using side set screws, solid knurled spring thumbscrews, or quick-release lever screws. MBA-1C05 joins 25 mm and 12.7 mm posts at right angles; MBA-1A90 joins 25 mm and 25 mm posts at right angles. MBA-1P carries a 50.8 mm × 50.8 mm plate whose M4 and M6 threaded holes mount optomechanical bases and mirror mounts. MBA-1C30 and MBA-1C60 clamp 30 mm or 60 mm cage systems. MBA-1RM sliding optical-post collars have two mounting positions 90° apart for perpendicular mounting on 25 mm posts. 25 mm post adapters, 90° angle. Models: MBA-1C05, MBA-1A90. Join two posts perpendicularly; solid knurled spring thumbscrews clamp 12.7 mm posts; flexure clamps hold 25 mm posts. MBA-1C05 joins 25 mm and 12.7 mm posts perpendicularly; MBA-1A90 joins 25 mm and 25 mm posts perpendicularly. An M6 socket screw locks the 25 mm post through a flexure clamp. A two-line locating bore holds the 12.7 mm post, locked by a solid knurled spring thumbscrew that can be reinforced with a 5 mm hex key. 25 mm post adapter with mounting plate. Model: MBA-1P. 50.8 mm × 50.8 mm plate; fits 25 mm posts; quick-release lever screw for easy installation/removal; 25 M4 and 24 M6 threaded holes. JCOPTIX MBA-1P has a removable 50.8 mm × 50.8 mm plate with an array of 25 M4 and 24 M6 holes, same-thread spacing 12.5 mm. Turning the supplied quick-release lever secures it to a 25 mm post. An internal ratchet repositions the handle without tightening or loosening the adapter. 25 mm post adapters for 30 mm and 60 mm cage systems. Models: MBA-1C30, MBA-1C60. Quick-release lever screws for fast attachment/removal; snap-in design for easy cage insertion/removal; fits 30 mm and 60 mm cage systems and 25 mm posts. These JCOPTIX 25 mm adapters clamp 30 mm and 60 mm cage systems. A single long M4 screw accepting a 2.5 mm hex key quickly locks cage rods. A quick-release lever operates a flexure clamp to attach to a 25 mm post. MBA-1C30 clamps 30mm cage components; MBA-1C60 clamps 60 mm components. 25 mm post collar. Model: MBA-1RM. Compact; thickness 12.7 mm; clamping diameter Ø25 mm. This sliding collar secures to a 25 mm post using an M4 rubber-tip set screw. Slide to position and tighten with a 2.0 mm key. Two mounting positions 90° apart have an M4 threaded hole and an M4 countersunk hole respectively, for optomechanics perpendicular to the 25 mm post.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Body Material | 6061-T6 |
| Surface Treatment | Black Anodized |
| Clamped Post Diameter | 25 mm and 12.7 mm |
| Adapter Angle | 90° |
| Distance Between Two Central Holes | 25.0 mm |
| Perpendicularity Tolerance | 0.03 mm |
| mm Post Locking Method | M6 Hex Socket Head Cap Screw |
| 12.7 mm Post Locking Method | M6 Thumb Screw |
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
Photoelectric switch Accessories Central-laser
Output form [Model=T3X-R18N]: NPN Output form [Model=T3X-R18P]: PNP Light Source [Shared by T3X-R18N/T3X-R18P (original merged columns)]: Red light-emitting diode LED
Photoelectric switch: compact, versatile, long-lived, accurate, fast-responding, and capable of long-distance detection, with strong resistance to optical, electrical, and magnetic interference. NPN (T3X-R18N) or PNP (T3X-R18P) outputs are available, with LIGHT-ON/DARK-ON selection and delay/timing functions.
-
Rotary axis (CK-ROT-M-80) Accessories Central-laser
Rotary axis dimensions [Model=CK-ROT-M-80]: 185 mm × 160 mm × 120 mm Rotary axis weight [Model=CK-ROT-M-80]: 4.95 kg Standard jaw clamping range [Model=CK-ROT-M-80]: 2~22 mm
Rotary-axis device CK-ROT-M-80 includes a driver, power supply, motor, and three-jaw chuck and works when connected to a laser-marking machine. Compact, stable, and detachable, with upward tilt to 90°, driver resolution of 0.009°, and round-head runout accuracy ≤0.04mm. Suitable for cylindrical-surface marking, circular text, jewelry, and graduated dials.
-
Rotary axis (CR-80/CR-100) Accessories Central-laser
Surface treatment [General table for the CR series]: Anodized Dimensions [General table for the CR series]: 295.9 mm × 285 mm × 223 mm Shaft-center height [General table for the CR series; Measured in horizontal placement]: 105 mm
CR-series high-speed rotary workholding fixture with 0–90° tilt: precision chuck and servo drive, freely adjustable and lockable working angle, suitable for marking, cutting, welding, and engraving. Optional chuck diameters are 80/100/125/160, with no diameter unit stated here; maximum load is 30kg.
-
Fume purifier, unit type (source wording) Accessories Central-laser
Air inlet interface [Model=CK-SP-S]: Φ75 Input Voltage [Model=CK-SP-S; 50/60HZ]: AC220 Rated Power [Model=CK-SP-S]: 200 W
Unit-type fume purifier, following the source wording: four-stage filtration, an efficient low-noise brushless DC motor, and a flexible extraction arm. Removes fumes and dust from laser marking, welding, and similar processes to improve the working environment.
-
Dual-position fume purifier Accessories Central-laser
Air inlet interface [Model=CK-SP-S200]: Φ75 Input Voltage [Model=CK-SP-S200; 50/60HZ]: AC220 Rated Power [Model=CK-SP-S200]: 150~200 W
Dual-position fume purifier with four-stage filtration, an efficient low-noise brushless DC motor, and a flexible extraction arm. Removes fumes and dust from laser marking, welding, and similar processes to improve the working environment.
Related Articles
Macro channel water-cooled stacked laser diodes integrate dozens of laser bars into one vertical stacked module with large-diameter macro flow cooling channels.
The CNGE 384 uncooled infrared core module is a high-performance core component for thermal imaging systems. Adopting mature uncooled infrared detection technology, it realizes all-weather thermal radiation perception and high-definition imaging without refrigeration equipment.
VCSEL, short for Vertical Cavity Surface Emitting Laser, is a widely used semiconductor laser component in modern optoelectronics. Unlike traditional edge-emitting lasers, VCSEL emits laser light vertically from its chip surface. Thanks to its low power consumption, stable beam quality, low cost, and easy integration, it has become the core light source for 3D sensing, wearable devices, and high-speed optical communication.
Founded in Beijing in 2011, Beijing FJR Opto-electronic Technology Co., Ltd. specializes in R&D, manufacturing and sales of infrared thermal imaging equipment and complete optoelectronic systems.
Loading...
Name
Phone
Organization
Use Case
Database Platform