19 mm Dovetail Coaxial Mount MRC-2
JCOPTIX dovetail coaxial mounts attach 30 mm or 60 mm systems to dovetail rails with axis heights of 30 mm or 50 mm above the rail top. Bottom dovetail clamps insert anywhere along the rail and lock with side M2.5 screws accepting 2.0 mm HEX. Options include mounting plates with central threaded holes for direct optic mounting and snap-in support mounts. 30 mm coaxial mounting plate for 19 mm dovetail rails. Model: MRC-1. Attaches 30 mm systems to rails. Axis height above rail: 30 mm. For Ø25.4 mm optics. Central SM1 (1.035"-40) hole. JCOPTIX 30 mm dovetail plates fit 19 mm wide MRR rails. Insert anywhere along the rail and lock with side M2.5 screws accepting 2.0mm HEX. Installed axis height: 30 mm above the rail. MRC-1 has an SM1 central hole for Ø25.4 mm optics up to 5.0 mm thick. Four Ø6 mm cage holes work with MCR rods. 30 mm snap-in coaxial mount for 19 mm dovetail rails. Model: MRC-2. Attaches 30 mm systems to rails. Axis height: 30 mm above rail. Snap-in mounting for quick installation/removal. Flexure clamps securely lock Ø6 mm rods. JCOPTIX 30 mm snap-in dovetail mounts attach 30 mm systems to 19 mm wide MRR rails. Insert anywhere along the rail and lock with side M2.5 screws accepting 2.0 mm HEX. Installed axis height: 30 mm above the rail. MRC-2 has two flexure bores accepting 30 mm system components. After snapping in, side M4 screws securely lock Ø6 mm rods. Snap-in installation enables quick assembly/disassembly.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Body Material | 6061-T6 |
| Surface Treatment | Black Anodized |
| Compatible Rail Type [Fits 19 mm Dovetail Rails, Not an Independent Dimension Quantity of This Mount] | 19 mm Dovetail Rail |
| Optical axis height [Distance from Rail Top Surface] | 30.0 mm |
| Compatible Hex Key | 2.0 mm HEX |
| Thickness | 9.0 mm |
| Mounting Method | Snap-In Mounting |
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
Photoelectric switch Accessories Central-laser
Output form [Model=T3X-R18N]: NPN Output form [Model=T3X-R18P]: PNP Light Source [Shared by T3X-R18N/T3X-R18P (original merged columns)]: Red light-emitting diode LED
Photoelectric switch: compact, versatile, long-lived, accurate, fast-responding, and capable of long-distance detection, with strong resistance to optical, electrical, and magnetic interference. NPN (T3X-R18N) or PNP (T3X-R18P) outputs are available, with LIGHT-ON/DARK-ON selection and delay/timing functions.
-
Rotary axis (CK-ROT-M-80) Accessories Central-laser
Rotary axis dimensions [Model=CK-ROT-M-80]: 185 mm × 160 mm × 120 mm Rotary axis weight [Model=CK-ROT-M-80]: 4.95 kg Standard jaw clamping range [Model=CK-ROT-M-80]: 2~22 mm
Rotary-axis device CK-ROT-M-80 includes a driver, power supply, motor, and three-jaw chuck and works when connected to a laser-marking machine. Compact, stable, and detachable, with upward tilt to 90°, driver resolution of 0.009°, and round-head runout accuracy ≤0.04mm. Suitable for cylindrical-surface marking, circular text, jewelry, and graduated dials.
-
Rotary axis (CR-80/CR-100) Accessories Central-laser
Surface treatment [General table for the CR series]: Anodized Dimensions [General table for the CR series]: 295.9 mm × 285 mm × 223 mm Shaft-center height [General table for the CR series; Measured in horizontal placement]: 105 mm
CR-series high-speed rotary workholding fixture with 0–90° tilt: precision chuck and servo drive, freely adjustable and lockable working angle, suitable for marking, cutting, welding, and engraving. Optional chuck diameters are 80/100/125/160, with no diameter unit stated here; maximum load is 30kg.
-
Fume purifier, unit type (source wording) Accessories Central-laser
Air inlet interface [Model=CK-SP-S]: Φ75 Input Voltage [Model=CK-SP-S; 50/60HZ]: AC220 Rated Power [Model=CK-SP-S]: 200 W
Unit-type fume purifier, following the source wording: four-stage filtration, an efficient low-noise brushless DC motor, and a flexible extraction arm. Removes fumes and dust from laser marking, welding, and similar processes to improve the working environment.
-
Dual-position fume purifier Accessories Central-laser
Air inlet interface [Model=CK-SP-S200]: Φ75 Input Voltage [Model=CK-SP-S200; 50/60HZ]: AC220 Rated Power [Model=CK-SP-S200]: 150~200 W
Dual-position fume purifier with four-stage filtration, an efficient low-noise brushless DC motor, and a flexible extraction arm. Removes fumes and dust from laser marking, welding, and similar processes to improve the working environment.
Related Articles
Macro channel water-cooled stacked laser diodes integrate dozens of laser bars into one vertical stacked module with large-diameter macro flow cooling channels.
The CNGE 384 uncooled infrared core module is a high-performance core component for thermal imaging systems. Adopting mature uncooled infrared detection technology, it realizes all-weather thermal radiation perception and high-definition imaging without refrigeration equipment.
VCSEL, short for Vertical Cavity Surface Emitting Laser, is a widely used semiconductor laser component in modern optoelectronics. Unlike traditional edge-emitting lasers, VCSEL emits laser light vertically from its chip surface. Thanks to its low power consumption, stable beam quality, low cost, and easy integration, it has become the core light source for 3D sensing, wearable devices, and high-speed optical communication.
Founded in Beijing in 2011, Beijing FJR Opto-electronic Technology Co., Ltd. specializes in R&D, manufacturing and sales of infrared thermal imaging equipment and complete optoelectronic systems.
Loading...
Name
Phone
Organization
Use Case
Database Platform