Switchable Magnetic Base MBB-1MA
JCOPTIX switchable magnetic bases are smaller than conventional bases, greatly reducing interference with other optomechanics in confined spaces. Strong magnets provide up to 30 kg holding force. A switch turns magnetism on/off for easy attachment and removal from magnetic breadboards or tables. Four top M4 holes accept an optional top plate through its four M4 countersunk holes. The plate has four 4-40 holes for 30 mm systems, four M4 holes for adjustable clamping arms and other optomechanics, and eight M6 holes for flexible mounting. Switchable magnetic base. Model: MBB-1M. Switchable magnetism for easy installation/removal. Nonremovable top M6 stud and M4 holes. Compact JCOPTIX bases provide up to 30 kg holding force and switchable magnetism for magnetic breadboards/tables. The top has a nonremovable M6 stud and M4 holes. The nonremovable M6 stud accepts optomechanics with bottom M6 holes; M4 holes attach the matching top plate. Switchable magnetic base with top plate. Model: MBB-1MA. Includes top plate. Four 4-40 holes for 30 mm systems. Four M4 holes for adjustable clamping arms. Eight M6 holes for flexible optomechanical mounting. The JCOPTIX plate has four 4-40 holes compatible with 30 mm systems, four M4 holes for clamping arms or other components, and eight M6 holes for flexible mounting. Thin switchable magnetic base. Model: MBB-1MT. Easy switchable attachment/removal. Size: 65 mm × 65 mm × 20 mm. Strong magnetism provides up to 15 kg holding force. The switch enables table attachment/removal. Top holes include 9 M6, 4 M4, and 4 M3 holes for required optomechanics.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Dimensions | 65 mm × 65 mm × 50 mm (Length × Width × Height) |
| Holding Force | 30 kg/66 Pounds |
| Thread Specifications and Quantity | M6 / 8 Pieces, M4 / 4 Pieces, US 4-40 / 4 Pieces |
| Top Plate Material | 6061-T6 aluminum alloy |
| General Parameters - Surface Finish | Black Anodized |
| General Parameters - Thread Specifications | M6 |
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
BA-01 Mounting Bases U-optic
Compatible Post Diameter: Φ12 Dimensions: 50 mm × 25 mm × 9.5 mm Mounting Holes: M6 Recessed Hole
Youguang Technology's BA-01 base plate is made of hard aluminum alloy, has M6 recessed holes and is used with SSP12 connecting rods.
-
Baseplate BA-01 Mounting Bases U-optic
Dimensions: 50 mm × 25 mm × 9.5 mm Mounting Holes: M6 Recessed Hole Material: Blackened Duralumin Alloy
Youguang Technology's BA-01 base plate is made of hard aluminum alloy, has M6 recessed holes and is used with SSP12 connecting rods.
-
Stainless-steel post holders and baseplate clamping bars YT-1 Mounting Bases Chinaddwy
Weight: 0.07 kg Length [Original table parenthetical annotation: 2.64inch]: 67.0 mm
-
Stainless-steel post holders and baseplate clamping bars YT-2 Mounting Bases Chinaddwy
Weight: 0.08 kg Length [Original table parenthetical annotation: 3.23inch]: 82.0 mm
-
Stainless-steel post holders and baseplate clamping bars XYT-1 Mounting Bases Chinaddwy
Weight: 0.04 kg Length [Original table parenthetical annotation: 2.31, with no source unit; Retained without guessing inch]: 58.51 mm
Related Articles
Macro channel water-cooled stacked laser diodes integrate dozens of laser bars into one vertical stacked module with large-diameter macro flow cooling channels.
The CNGE 384 uncooled infrared core module is a high-performance core component for thermal imaging systems. Adopting mature uncooled infrared detection technology, it realizes all-weather thermal radiation perception and high-definition imaging without refrigeration equipment.
VCSEL, short for Vertical Cavity Surface Emitting Laser, is a widely used semiconductor laser component in modern optoelectronics. Unlike traditional edge-emitting lasers, VCSEL emits laser light vertically from its chip surface. Thanks to its low power consumption, stable beam quality, low cost, and easy integration, it has become the core light source for 3D sensing, wearable devices, and high-speed optical communication.
Founded in Beijing in 2011, Beijing FJR Opto-electronic Technology Co., Ltd. specializes in R&D, manufacturing and sales of infrared thermal imaging equipment and complete optoelectronic systems.
Loading...
Name
Phone
Organization
Use Case
Database Platform