Temperature Controller SUB25-ITO-H
JCOPTIX temperature controllers support thermoelectric coolers or resistive heaters such as ceramic heating plates/rods and PTC heating plates. They support NTC thermistors for high-resolution temperature control and measurement and connect conveniently to computers by USB Type-C. Complete control software enables immediate use and includes a C++ driver for researchers' further development. Connecting cables and quick connectors are included. The controller supports PID autotuning; users can also set PID parameters and save them in the controller. Three panel buttons increase or decrease temperature and turn control on or off. The display shows target and current temperatures, and the power-button indicator shows operating status. A side SMA port can be configured as input or output for external control or status indication. Users can configure overvoltage, overcurrent, and overtemperature protection. Additional protections cover open-circuit sensors and excessive controller temperature. The controller uses M8-S4A-GPL M10-JD to control heating elements and read temperature parameters. Temperature controller. Model: LTC-AC50. Heating temperature -20~100℃; standalone or software operation; autotuning PID. JCOPTIX controllers output 0~10V and 0-3A. External signals can control power output for use with other equipment. The panel has 3 touch buttons for quick temperature setting. Supplied quick connectors connect TECs or resistive heaters and temperature sensors. A CET-NTC103 sensor must be connected; without it the controller reports an error and cannot operate normally. USB Type-C provides convenient computer connection. Transparent electrically heated window. Model: SUB25-ITO-H. Soda-lime glass/ITO; average transmission >86% at 400-700 nm; DC drive up to 9 V/0.48 A; maximum heating temperature 90℃, tested at room temperature; compatible with JC controller LTC-AC50 and PID autotuning. JCOPTIX transparent heated windows use ITO (indium tin oxide) resistive heating. Applying the corresponding voltage/current produces uniform heat at the surface, reaching 90℃ from room temperature in a few minutes; see the curve page for the heating curve. Adjusting output voltage/current adjusts the maximum attainable temperature. Maximum input is 9 V/0.48 A. The windows also support JC controller LTC-AC50; PID autotuning improves stability at the preset temperature. Temperature control requires JC sensor CET-NTC103, attached outside the clear aperture with thermally conductive silicone gel or silicone rubber. Real-time temperature measurement enables control. Average visible transmission is >86% at 400-700 nm. Suitable for condensation or fogging on optics in cold environments, the window quickly reaches the specified temperature to ensure normal cold-environment operation. Custom options include substrate size/shape, ITO sheet resistance, and wire gauge and length. Contact JCOPTIX technical support.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Glass Material | Soda-Lime / ITO |
| Dimensions | Ø25 mm |
| Thickness | 1.1 mm |
| Effective Clear Aperture | Ø18 mm |
| Transmittance (avg.) [Average; 400-700 nm] | >86% @ 400-700 nm |
| ITO Sheet Resistance | 18 ± 3 Ω |
| Maximum Heating Voltage/Current [Maximum Heating Voltage 9 V; Current 0.48 A] | 9 V/0.48 A |
| Maximum Heating Temperature (Tested at Room Temperature) | 90 ℃ |
| Connection-wire length | 0.5 m |
Key Features
Datasheet
Supplier Information
Related Products
-
Stainless-steel platform Optical Tables and Breadboards Chinaddwy
This optical vibration-isolation platform series is precision-machined from high-quality aluminum alloy or magnetic stainless steel for light weight and easy movement. Standard-spaced threaded holes secure adjustment mounts. Fine surface finishing provides appearance and durability, with custom specifications available. Flatness: 0.3mm/600mm. Hole spacing: 25mmX25mm. Thread: M6.
-
Optical platform with support frame WN01DDWY300x300 Optical Tables and Breadboards Chinaddwy
Platform Dimensions AxB: 300 mm × 300 mm Thickness C: 50 mm Hole Spacing: 25 mm × 25 mm
This optical-table series states tabletop materials as Cr13 stainless steel 10.2 and carbon steel 10.6. A honeycomb core and suitable stiffness-to-weight ratio provide vibration resistance. Precision-machined magnetic stainless steel has high flatness and a matte finish suited to optics, reducing glare and stray light. Standard-spaced threaded holes mount adjustment devices. Custom specifications are available. Flatness: 0.05mm/m2. Hole spacing: 25mmX25mm. Thread: M6. Roughness: <1.6um. Surface midi-pattern treatment (source wording).
-
Optical platform with support frame WN01DDWY300x600 Optical Tables and Breadboards Chinaddwy
Platform Dimensions AxB: 300 mm × 600 mm Thickness C: 50 mm Hole Spacing: 25 mm × 25 mm
This optical-table series states tabletop materials as Cr13 stainless steel 10.2 and carbon steel 10.6. A honeycomb core and suitable stiffness-to-weight ratio provide vibration resistance. Precision-machined magnetic stainless steel has high flatness and a matte finish suited to optics, reducing glare and stray light. Standard-spaced threaded holes mount adjustment devices. Custom specifications are available. Flatness: 0.05mm/m2. Hole spacing: 25mmX25mm. Thread: M6. Roughness: <1.6um. Surface midi-pattern treatment (source wording).
-
Optical platform with support frame WN01DDWY300x900 Optical Tables and Breadboards Chinaddwy
Platform Dimensions AxB: 300 mm × 900 mm Thickness C: 50 mm Hole Spacing: 25 mm × 25 mm
This optical-table series states tabletop materials as Cr13 stainless steel 10.2 and carbon steel 10.6. A honeycomb core and suitable stiffness-to-weight ratio provide vibration resistance. Precision-machined magnetic stainless steel has high flatness and a matte finish suited to optics, reducing glare and stray light. Standard-spaced threaded holes mount adjustment devices. Custom specifications are available. Flatness: 0.05mm/m2. Hole spacing: 25mmX25mm. Thread: M6. Roughness: <1.6um. Surface midi-pattern treatment (source wording).
-
Quartz precision-optics series Optical Tables and Breadboards Feilihua
The precision-optics series includes quartz windows, polished quartz plates, and quartz substrates.
Related Articles
Macro channel water-cooled stacked laser diodes integrate dozens of laser bars into one vertical stacked module with large-diameter macro flow cooling channels.
The CNGE 384 uncooled infrared core module is a high-performance core component for thermal imaging systems. Adopting mature uncooled infrared detection technology, it realizes all-weather thermal radiation perception and high-definition imaging without refrigeration equipment.
VCSEL, short for Vertical Cavity Surface Emitting Laser, is a widely used semiconductor laser component in modern optoelectronics. Unlike traditional edge-emitting lasers, VCSEL emits laser light vertically from its chip surface. Thanks to its low power consumption, stable beam quality, low cost, and easy integration, it has become the core light source for 3D sensing, wearable devices, and high-speed optical communication.
Founded in Beijing in 2011, Beijing FJR Opto-electronic Technology Co., Ltd. specializes in R&D, manufacturing and sales of infrared thermal imaging equipment and complete optoelectronic systems.
Loading...
Name
Phone
Organization
Use Case
Database Platform