Quartz Air-Spaced Zero-Order Quarter-Wave Plate ZWP20Q-415Q
Quartz air-spaced zero-order quarter-wave plates commonly convert linear and circular polarization into each other, controlling polarization from lasers or other narrowband sources. JCOPTIX combines two multiple-order quartz plates with an air gap, suitable for high-power diode and tunable lasers. One plate's fast axis aligns with the other's slow axis, making net retardance the difference between their phase retardances. Compared with multiple-order plates, zero-order plates offer several advantages: reduced wavelength sensitivity, ideal for laser diodes and tunable lasers; reduced temperature sensitivity, since thermal changes in the two quartz plates cancel and retardance changes little over a wide temperature range; and high-power suitability, since the air gap rather than optical adhesive within the clear aperture raises the damage threshold. JCOPTIX standard air-spaced zero-order housings have SM05 external threads for 10 mm clear-aperture plates or SM1 external threads for 20 mm clear-aperture plates. They fit matching internally threaded rotation mounts such as MMR-05T and MMR-1T. JCOPTIX's proprietary rubber washer at the thread base facilitates direct alignment to specific mount angles. Operation is simple and quick: 1. Screw the zero-order plate into the rotation mount until the SM05/SM1 thread reaches its end; lock the rotating part as needed. 2. Check the difference between the fast-axis direction (white housing line) and the target scale mark (0° or 90°). 3. Apply slight force to continue turning the protruding cylindrical part until the white fast-axis line aligns with the target mark. Adjustment is approximately 60°. JCOPTIX offers mounted quartz air-spaced zero-order plates with clear apertures of 10 mm, 20 mm, and 45.5 mm. Housings are engraved with model, design wavelength, fast-axis direction, and other parameters for quick identification. Contact technical support for custom sizes, coatings, or wavelengths.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Optical element material | Quartz Crystal |
| Clear Aperture Dimension | 20.0 mm |
| Operating Wavelength | 415 nm |
| Retardance | λ/4 |
| Retardance accuracy | ± λ/300 |
| Antireflection Coating R_abs [Design wavelength (6° angle of incidence, per surface)] | R_abs< 0.25% @ design wavelength (6° angle of incidence, per surface) |
| Transmitted wavefront error [@633 nm] | λ/8 |
| Surface parallelism | < 10 arcsec |
| Surface quality (scratch/dig) | 20/10 |
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
High-Power Variable Optical Attenuator VBA0120-355 Waveplates U-optic
Type: Transmissive Design Wavelength: 355 nm Clear Aperture Dimension: 14mm
A high-power variable optical attenuator consists of one or two thin-film polarizing beamsplitters and a zero-order half-wave plate. Rotating the half-wave plate continuously changes the transmitted fraction of the output light. Transmission and reflection versions are available. The transmission version provides a dynamic attenuation range from 0.5% to 95%; the reflection version provides a range from 0.25% to 99%. High-power variable optical attenuators are primarily used to adjust output power in high-power environments.
-
High-Power Variable Optical Attenuator VBA1120-355 Waveplates U-optic
Type: Reflective Design Wavelength: 355 nm Clear Aperture Dimension: 14mm
A high-power variable optical attenuator consists of one or two thin-film polarizing beamsplitters and a zero-order half-wave plate. Rotating the half-wave plate continuously changes the transmitted fraction of the output light. Transmission and reflection versions are available. The transmission version provides a dynamic attenuation range from 0.5% to 95%; the reflection version provides a range from 0.25% to 99%. High-power variable optical attenuators are primarily used to adjust output power in high-power environments.
-
High-Power Variable Optical Attenuator VBA1120-266 Waveplates U-optic
Type: Reflective Design Wavelength: 266 nm Clear Aperture Dimension: 14mm
A high-power variable optical attenuator consists of one or two thin-film polarizing beamsplitters and a zero-order half-wave plate. Rotating the half-wave plate continuously changes the transmitted fraction of the output light. Transmission and reflection versions are available. The transmission version provides a dynamic attenuation range from 0.5% to 95%; the reflection version provides a range from 0.25% to 99%. High-power variable optical attenuators are primarily used to adjust output power in high-power environments.
-
High-Power Variable Optical Attenuator VBA0120-532 Waveplates U-optic
Type: Transmissive Design Wavelength: 532 nm Clear Aperture Dimension: 14mm
A high-power variable optical attenuator consists of one or two thin-film polarizing beamsplitters and a zero-order half-wave plate. Rotating the half-wave plate continuously changes the transmitted fraction of the output light. Transmission and reflection versions are available. The transmission version provides a dynamic attenuation range from 0.5% to 95%; the reflection version provides a range from 0.25% to 99%. High-power variable optical attenuators are primarily used to adjust output power in high-power environments.
-
Waveplate Waveplates 100optics
Transmission range [General page-top description, without specific subtype/material identification]: 330-2100 nm Coefficient of Thermal Expansion [General page-top description, without specific subtype/material identification]: 7.5x10⁻⁶ Density [General page-top description, without specific subtype/material identification]: 2.51 g/cubic centimeter
Waveplates are made from birefringent materials. The speeds of the o ray and the other ray through the material are inversely proportional to their refractive indices. Their speed difference produces a phase difference when they recombine; at a particular wavelength, this is determined by the retarding thickness. Transmission range: 330–2100nm. Thermal-expansion coefficient: 7.5 x10⁻⁶/K. Density: 2.51g per cubic centimeter. Half-wave plates: thickness gives a phase difference of L/2 wavelengths for true zero order, or multiples of l/2 wavelengths for multiple order. A linearly polarized incident beam remains linearly polarized, but its angle to the optical axis is twice the incident angle. A half-wave plate therefore acts as a continuously adjustable polarization rotator, used to rotate the polarization plane, for electro-optic modulation, and with a polarizing cube as a variable-ratio beamsplitter. Quarter-wave plates: thickness gives a phase difference of L/4 wavelengths for true zero order, or multiples of l/4 wavelengths for multiple order. When the angle q between the incident electric-field vector and the retarding principal plane is 45, the output is circularly polarized. Double passage by mirror reflection makes a quarter-wave plate act as a half-wave plate, rotating the polarization plane through a particular angle. Applications include generating circular or linear polarization from circular or elliptical states, optical pumping, suppressing unwanted reflections, and optical isolation.
Related Articles
Macro channel water-cooled stacked laser diodes integrate dozens of laser bars into one vertical stacked module with large-diameter macro flow cooling channels.
The CNGE 384 uncooled infrared core module is a high-performance core component for thermal imaging systems. Adopting mature uncooled infrared detection technology, it realizes all-weather thermal radiation perception and high-definition imaging without refrigeration equipment.
VCSEL, short for Vertical Cavity Surface Emitting Laser, is a widely used semiconductor laser component in modern optoelectronics. Unlike traditional edge-emitting lasers, VCSEL emits laser light vertically from its chip surface. Thanks to its low power consumption, stable beam quality, low cost, and easy integration, it has become the core light source for 3D sensing, wearable devices, and high-speed optical communication.
Founded in Beijing in 2011, Beijing FJR Opto-electronic Technology Co., Ltd. specializes in R&D, manufacturing and sales of infrared thermal imaging equipment and complete optoelectronic systems.
Loading...
Name
Phone
Organization
Use Case
Database Platform