Tunable Liquid Crystal Phase Retarder LVVF117-T4
JCOPTIX variable LC phase retarders use high-quality empty LC cells and nematic material in standard one-inch housings, with connecting leads at both ends. External AC changes molecular tilt in milliseconds, rapidly adjusting retardance from ~30nm to λ/2 or λ without mechanical movement, for polarization/phase control. LC properties permit operation at 0-45℃. Three bands, 400-700 nm, 650-1100 nm, and 1050-1700 nm, cover visible/near-IR applications. The large-aperture one-inch version redesigns the cell/housing to increase clear aperture from standard Ø10 mm to Ø17 mm while retaining standard one-inch mounting, meeting larger-aperture needs. Two series offer half-wave ~30 nm–λ/2 or full-wave ~30 nm–λ. Both provide variable retardance, fast response, and broad temperature range within their bands; choose to requirements or customize specifications. Active LC products require AC, not DC, which accumulates charge and damages devices. Recommended drive is 1-2 kHz square wave, amplitude 0-±25 V, duty cycle 50%. Above 25 V may degrade or damage devices. Half-wave LC phase retarders. Models: LVVH-T2, LVVH-T3, LVVH-T4. Retardance ~30 nm–λ/2; Ø10 mm aperture; fast response; 0-45℃; bands 400-700 nm, 650-1100 nm, 1050-1700 nm. JCOPTIX half-wave versions offer three bands, 400-700 nm, 650-1100 nm, and 1050-1700 nm. External AC adjusts ~30 nm to λ/2 with high aperture-wide uniformity, fast response, and broad temperature range; see specifications/response-time tabs. Housings fit Ø1-inch optic mounts and mark the slow axis. Full-wave LC phase retarders. Models: LVVF-T2, LVVF-T3, LVVF-T4. Retardance ~30 nm–λ; Ø10 mm aperture; fast response; 0-45℃; bands 400-700 nm, 650-1100 nm, 1050-1700 nm. JCOPTIX full-wave versions offer 400-700 nm, 650-1100 nm, and 1050-1700 nm. External AC adjusts ~30 nm to λ with high uniformity over the aperture, fast response, and broad temperature range; see specifications/response-time tabs. Housings fit Ø1-inch mounts and mark the slow axis. One-inch large-aperture half-wave LC retarders. Models: LVVH117-T2, LVVH117-T3, LVVH117-T4. Retardance ~30 nm–λ/2; Ø17 mm aperture; fast response; 0-45℃; bands 400-700 nm, 650-1100 nm, 1050-1700 nm. JCOPTIX large-aperture half-wave versions offer 400-700 nm, 650-1100 nm, and 1050-1700 nm. External AC adjusts ~30 nm to λ/2 with high aperture-wide uniformity, fast response, and broad temperature range; see specifications/response-time tabs. Housings fit Ø1-inch smooth-bore mounts with set-screw fixation and mark the slow axis. One-inch large-aperture full-wave LC retarders. Models: LVVF117-T2, LVVF117-T3, LVVF117-T4. Retardance ~30 nm–λ; Ø17 mm aperture; fast response; 0-45℃; bands 400-700 nm, 650-1100 nm, 1050-1700 nm. JCOPTIX large-aperture full-wave versions offer 400-700 nm, 650-1100 nm, and 1050-1700 nm. External AC adjusts ~30 nm to λ with high aperture-wide uniformity, fast response, and broad temperature range; see specifications/response-time tabs. Housings fit Ø1-inch smooth-bore mounts with set-screw fixation and mark the slow axis.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Operating Wavelength | 1050-1700 nm |
| Response Time [Switching Between λ and λ/2, Rise/Fall; Test: 1064 nm, 25℃] | 83.8 ms/31.8 ms @ 1064 nm, 25 ℃ |
| Antireflection Coating | 1050-1700 nm |
| Response Time [Switching Between ~30 nm and λ/2, Rise/Fall; Test: 1064 nm, 25℃] | 29 ms/2.3 ms @ 1064 nm, 25 ℃ |
| Response Time [Switching Between ~30 nm and λ, Rise/Fall; Test: 1064 nm, 25℃] | 121.3 ms/3.8 ms @ 1064 nm, 25 ℃ |
| Retardance [Lower Limit Approximately 30 nm; Upper Limit λ (No Conversion)] | ~30 nm-λ |
| Reflection R_avg [0° angle of incidence] | R_avg<0.5% (0° Angle of Incidence) |
| Operating Voltage [AC Drive; DC Must Not Be Used] | 0 - ± 25 V |
| Housing Dimensions | Ø25.4 × 14 mm, Compatible with Ø1-Inch Optical Element Mounts (Smooth-Bore Type, Secured with Set Screws) |
| Effective Clear Aperture | Ø17 mm |
| Retardance Uniformity | <λ/20 |
| Surface Finish | 40/20 |
| Surface Flatness [@633 nm] | λ/4 @ 633 nm |
| Element Material | Nematic Liquid Crystal / UV Fused Silica Glass |
| Operating Temperature | 0-45 ℃ |
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
High-Power Variable Optical Attenuator VBA0120-355 Waveplates U-optic
Type: Transmissive Design Wavelength: 355 nm Clear Aperture Dimension: 14mm
A high-power variable optical attenuator consists of one or two thin-film polarizing beamsplitters and a zero-order half-wave plate. Rotating the half-wave plate continuously changes the transmitted fraction of the output light. Transmission and reflection versions are available. The transmission version provides a dynamic attenuation range from 0.5% to 95%; the reflection version provides a range from 0.25% to 99%. High-power variable optical attenuators are primarily used to adjust output power in high-power environments.
-
High-Power Variable Optical Attenuator VBA1120-355 Waveplates U-optic
Type: Reflective Design Wavelength: 355 nm Clear Aperture Dimension: 14mm
A high-power variable optical attenuator consists of one or two thin-film polarizing beamsplitters and a zero-order half-wave plate. Rotating the half-wave plate continuously changes the transmitted fraction of the output light. Transmission and reflection versions are available. The transmission version provides a dynamic attenuation range from 0.5% to 95%; the reflection version provides a range from 0.25% to 99%. High-power variable optical attenuators are primarily used to adjust output power in high-power environments.
-
High-Power Variable Optical Attenuator VBA1120-266 Waveplates U-optic
Type: Reflective Design Wavelength: 266 nm Clear Aperture Dimension: 14mm
A high-power variable optical attenuator consists of one or two thin-film polarizing beamsplitters and a zero-order half-wave plate. Rotating the half-wave plate continuously changes the transmitted fraction of the output light. Transmission and reflection versions are available. The transmission version provides a dynamic attenuation range from 0.5% to 95%; the reflection version provides a range from 0.25% to 99%. High-power variable optical attenuators are primarily used to adjust output power in high-power environments.
-
High-Power Variable Optical Attenuator VBA0120-532 Waveplates U-optic
Type: Transmissive Design Wavelength: 532 nm Clear Aperture Dimension: 14mm
A high-power variable optical attenuator consists of one or two thin-film polarizing beamsplitters and a zero-order half-wave plate. Rotating the half-wave plate continuously changes the transmitted fraction of the output light. Transmission and reflection versions are available. The transmission version provides a dynamic attenuation range from 0.5% to 95%; the reflection version provides a range from 0.25% to 99%. High-power variable optical attenuators are primarily used to adjust output power in high-power environments.
-
Waveplate Waveplates 100optics
Transmission range [General page-top description, without specific subtype/material identification]: 330-2100 nm Coefficient of Thermal Expansion [General page-top description, without specific subtype/material identification]: 7.5x10⁻⁶ Density [General page-top description, without specific subtype/material identification]: 2.51 g/cubic centimeter
Waveplates are made from birefringent materials. The speeds of the o ray and the other ray through the material are inversely proportional to their refractive indices. Their speed difference produces a phase difference when they recombine; at a particular wavelength, this is determined by the retarding thickness. Transmission range: 330–2100nm. Thermal-expansion coefficient: 7.5 x10⁻⁶/K. Density: 2.51g per cubic centimeter. Half-wave plates: thickness gives a phase difference of L/2 wavelengths for true zero order, or multiples of l/2 wavelengths for multiple order. A linearly polarized incident beam remains linearly polarized, but its angle to the optical axis is twice the incident angle. A half-wave plate therefore acts as a continuously adjustable polarization rotator, used to rotate the polarization plane, for electro-optic modulation, and with a polarizing cube as a variable-ratio beamsplitter. Quarter-wave plates: thickness gives a phase difference of L/4 wavelengths for true zero order, or multiples of l/4 wavelengths for multiple order. When the angle q between the incident electric-field vector and the retarding principal plane is 45, the output is circularly polarized. Double passage by mirror reflection makes a quarter-wave plate act as a half-wave plate, rotating the polarization plane through a particular angle. Applications include generating circular or linear polarization from circular or elliptical states, optical pumping, suppressing unwanted reflections, and optical isolation.
Related Articles
Macro channel water-cooled stacked laser diodes integrate dozens of laser bars into one vertical stacked module with large-diameter macro flow cooling channels.
The CNGE 384 uncooled infrared core module is a high-performance core component for thermal imaging systems. Adopting mature uncooled infrared detection technology, it realizes all-weather thermal radiation perception and high-definition imaging without refrigeration equipment.
VCSEL, short for Vertical Cavity Surface Emitting Laser, is a widely used semiconductor laser component in modern optoelectronics. Unlike traditional edge-emitting lasers, VCSEL emits laser light vertically from its chip surface. Thanks to its low power consumption, stable beam quality, low cost, and easy integration, it has become the core light source for 3D sensing, wearable devices, and high-speed optical communication.
Founded in Beijing in 2011, Beijing FJR Opto-electronic Technology Co., Ltd. specializes in R&D, manufacturing and sales of infrared thermal imaging equipment and complete optoelectronic systems.
Loading...
Name
Phone
Organization
Use Case
Database Platform