Tera2102 10G~100G temperature-controlled test system
The Tera2102 is a 40G/50G/100G temperature-controlled test system with two module-test paths at different temperatures: First, 40G/50G/100G QSFP+/QSFP28; second, 10G/25G SFP+/SFP28. Each RF interface supports 10G/11G/12G/14G/22G/24.3G/25.7G/28.05Gb/s for 10GE/16GFC/25GE/40GE/CPRI/100GE/128GFC module/AOC development. Tera2100-OE enables 10G/25G eye diagrams.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Temperature Range [TEC control section; Performance table] | -5~85 ℃ |
| Power Supply [TEC control section; Performance table; TEC system is AC-powered] | typical:220 V(AC) |
| Total Unit Power Consumption [TEC control section; Performance table] | ≤180 W |
| Temperature Accuracy [TEC control section; Performance table] | typical:0.1 ºC |
| Storage temperature [TEC control section; Performance table] | -10~70 ºC |
| Temperature change rate [TEC control section; Performance table; 25℃ ~ -5℃ <2min; Original maximum column: 2] | <2 Min |
| Temperature change rate [TEC control section; Performance table; 25℃ ~ 80℃ <1min; Original maximum column: 1] | <1 Min |
| Humidity [TEC control section; Performance table; Non-Condensing] | 5~90 % |
| TEC consumption [TEC control section; Performance table; 0~70 ℃] | typical:2000 Hour |
| Communication Interface [TEC control section; Performance table] | Serial port to USB |
| Data Rate [RF test board; Performance table] | 9~30 Gb/s |
| Power Supply [RF test board; Performance table] | typical:8.5 V(DC) |
| Power Supply [RF test board; Performance table] | 5~9 V(DC) |
| Total Unit Power Consumption [RF test board; Performance table] | ≤2 W |
| Operating Temperature [RF test board; Performance table; Cooling requires an external ambient temperature of 23 degrees or below.] | -5~75 ºC |
| Storage temperature [RF test board; Performance table] | -10~70 ºC |
| Humidity [RF test board; Performance table; Non-Condensing] | 5~90 % |
| RF interface [RF test board; Performance table] | K (2.92mm), compatible with SMA |
| Power Supply [RF test board; Main features] | 7~9 V |
| Number of RF interface channels [First path 40G/100G QSFP+/QSFP28; 10~28Gb/s] | 4 channels |
| Number of RF interface channels [Second path 10G/25G SFP+/SFP28; 10~28Gb/s] | 1 channels |
| Supported RF interface rate [4 channels on the first path or 1 channel on the second path, with their respective interfaces] | 10~28 Gb/s |
| Temperature Control Range [TEC control section; Explanatory text] | -10~85 ℃ |
| Temperature Accuracy [TEC control section; The text states that it can be within this value] | 0.2 ℃ |
| Control Interface [TEC control section; Remote control, temperature detection, overtemperature and overcurrent protection] | RS232 |
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
Y3000 demodulator Fiber Test & Measurement Bws-tech
Y3000-Operating Wavelength: C band 1550nm Y3000-Fiber Interface: FC/APC Y3000-Power Supply: 12 VDC
The Fiber Y3000 series high-speed demodulator uses interference-fringe counting and phase demodulation to resolve cavity-length changes accurately, with sampling frequencies up to 100MHz. It supports simultaneous interference using dual-wavelength laser sources, greatly improving demodulation accuracy and reliability. The low transmission loss of the 1550nm source also enables long-distance detection. The high-speed demodulator is suitable for Baiweishen Technology's Fiber S100 and Fiber S200 Fabry-Perot cavity pressure sensors and can be used for high-speed pressure monitoring.
-
Test series SWT-32EML Fiber Test & Measurement Soliware
LD drive current: max:500 mA Power Supply Voltage [Original Power Supply Column]: 1AC220 Power Supply Frequency [Original Power Supply Column]: 50/60
-
Tera2100-2 100G optoelectronic bit-error-rate tester Fiber Test & Measurement Terawan
Data Rate [Performance Parameter Table]: 9~29 Gb/s Output amplitude [Performance Parameter Table]: 200~1000 mV Output jitter (P-P) [Performance Parameter Table; PRBS31]: typical:5 Ps
The Tera2100-2 provides 10G/25G/40G/100G electrical pattern generation and error detection, plus 40G/100G QSFP+/QSFP28 module analysis, generation, and error detection. Four RF interfaces support 10G/11G/12G/14G/22G/24.3G/25.7G/28.05Gb/s for 10GE/16GFC/25GE/40GE/CPRI/100GE/128GFC module/AOC development, with 4-channel precision 10G~28G testing. Tera2100-OE enables 10G/25G eye diagrams. Optical QSFP+/QSFP28 ports test 100GE QSFP28 (SR, CWDM, PSM4, LR), 40GE QSFP+ (SR, LR), and 64GFC QSFP+, with 4-channel precision 10G/14G/28G bit-error testing.
-
Tera2140 10G/25G/40G/100G module tester Fiber Test & Measurement Terawan
Power Supply: 5 V Module interface [SFF interfaces for two module types]: QSFP+/QSFP28、SFP+/SFP28 Number of PRBS signal channels [QSFP+/QSFP28; 10G or 25G~28Gb/s]: 4 channels
The Tera2140 tests 10G/25G/40G/100G modules through QSFP+/QSFP28 and SFP+/SFP28. It tests services/performance of 100GE QSFP28 (SR, CWDM, PSM4, LR) and 40GE QSFP+ (SR, LR), with 4-channel precision 10G/25G errors. It also tests 25GE SFP28 (SR, LR) and 10GE SFP (SR, LR), with single-channel precision 10G/25G errors.
Related Articles
Macro channel water-cooled stacked laser diodes integrate dozens of laser bars into one vertical stacked module with large-diameter macro flow cooling channels.
The CNGE 384 uncooled infrared core module is a high-performance core component for thermal imaging systems. Adopting mature uncooled infrared detection technology, it realizes all-weather thermal radiation perception and high-definition imaging without refrigeration equipment.
VCSEL, short for Vertical Cavity Surface Emitting Laser, is a widely used semiconductor laser component in modern optoelectronics. Unlike traditional edge-emitting lasers, VCSEL emits laser light vertically from its chip surface. Thanks to its low power consumption, stable beam quality, low cost, and easy integration, it has become the core light source for 3D sensing, wearable devices, and high-speed optical communication.
Founded in Beijing in 2011, Beijing FJR Opto-electronic Technology Co., Ltd. specializes in R&D, manufacturing and sales of infrared thermal imaging equipment and complete optoelectronic systems.
Loading...
Name
Phone
Organization
Use Case
Database Platform