HXYY-160
1. Maximum travel is referenced to the table's central position. Alternative tabletop/base materials: S50C; S50C+ with quenching and tempering to HRC28-32. Base material is S50C with black-chrome plating. A standard five-phase stepper motor and H12 aviation connector; compact, thin, lightweight construction for light loads, low speeds, and scientific experiments; a high-quality small-lead roller screw for high resolution at the same microstepping factor; crossed-ball guides for smooth travel with lateral preload adjustment and clearance elimination; a high-quality rigid motor/ball-screw coupling for synchronous transmission with low eccentric disturbance and noise; zero and limit switches for positioning and protection. 10. Standard-spaced threaded and through base mounting holes.
Save to Favorites
Overview
Specifications
| Parameter | Value |
|---|---|
| Platform Dimensions | 160×160 |
| Base Dimensions | 170×170 |
| Height | 52 mm |
| Travel | ±5×±5 |
| Angle (θ) | ±4.4 ° |
| Main Body Material | S50C |
| Surface Treatment | Black anodized/black surface treatment |
| Lead Screw Lead | 1.0 mm |
| Linear positioning repeatability | ±1 μm |
| 5-phase motor step angle | 0.72 ° |
| Straightness | 10 μm |
| Self-Weight | Approximately 8 |
| Platform load capacity [Planar Mounting] | 30 KG |
Datasheet
Supplier Information
Related Products
-
F13-620JR
Positioner
Chinaddwy
Operating Position: R (Rightward) Platform Dimensions: 60 mm × 60 mm Guide rail: Crossed-Roller Guide
Manual fine-adjustment mount; one-dimensional X-axis fine-adjustment mount.
-
F25-125JC
Positioner
Chinaddwy
Operating Position: C (Centerward) Platform Dimensions: 125 mm × 125 mm Guide rail: Crossed-Roller Guide
Manual fine-adjustment mount; one-dimensional X-axis fine-adjustment mount.
-
Silicon photonics FA coupling machine
Positioner
Terawan
Silicon-photonics FA alignment system supporting Tx FA and RX FA alignment of silicon-photonics modules.
-
SS-20-II
Positioner
Sp-scan
Incident beam spot: 20 mm Following error time: 320 μs Marking Speed [F-theta f=160mm]: 1 m/s
The SS-20-II two-dimensional scanner upgrades the SS-20 with lower power and temperature drift. The SS-20-II mainly serves QCW welding, fiber-delivered welding, hybrid welding, laser cleaning, CO2 marking/cutting, and UV cutting.
-
UV-3D dynamic (pre-focusing) galvanometer scanner PR10
Positioner
Central-laser
Working Area [Model=UV-PR10; Area configuration=250*250mm]: 250 mm × 250 mm Zoom Range [Model=UV-PR10; Area configuration=250*250mm]: 109 mm Working Focal Length [Model=UV-PR10; Area configuration=250*250mm]: 568~677 mm
UV-3D dynamic pre-focus PR10: UV pre-focus 3D dynamic-focus scanning galvanometer with XY axes and a dynamic Z axis. Supports 3D marking of height steps, reliefs, curved surfaces, and large formats. Repeat marking accuracy is 5urad; suitable for lasers ≤200W and supports XY2-100.
Related Articles
The petrochemical industry features continuous high-risk production, where production equipment operates uninterruptedly under extreme working conditions including high temperature, high pressure, strong corrosion and oxidation.
Driven by the continuous pursuit of higher precision and efficiency in optical communication and optoelectronic device manufacturing, OLCR-1000 Low-Coherence Interferometer, independently developed by Wuhan Guanggu Interconnect Technology Co., Ltd., provides an innovative technical solution for distributed return loss testing of optical fibers and optoelectronic devices.
Driven by the rapid upgrading of intelligent vehicles, optoelectronic sensing technologies represented by laser sensing and infrared thermal imaging have become core pillars for high-level autonomous driving and smart cockpit iteration. Leveraging automotive-grade optoelectronic R&D advantages, Pilot Technology Group launches the VITAL intelligent vehicle solution. By integrating high-power VCSEL laser chips and vehicle infrared night-vision thermal imagers, the system comprehensively enhances vehicle environmental perception and realizes safer, smarter and more comfortable driving experiences.
Fiber lasers and fiber amplification systems require excitation sources with stable wavelength, narrow spectral linewidth and consistent output power.
Loading...
Name
Phone
Organization
Use Case
Database Platform