2.5G 1X9 optical module, single-mode dual-fiber
Save to Favorites
Specifications
| Parameter | Value |
|---|---|
| Wavelength [Specifications; 1310] | min:1260 nm; typical:1310 nm; max:1360 nm |
| Power Supply Voltage [Specifications; Vcc] | min:3.135 V; typical:3.3 V; max:3.465 V |
| Signal level [Specifications; PECL] | typical:3.2~4.0 |
| Output spectral width [Specifications; FP-LD, RMS] | max:4 nm |
| Extinction Ratio [Specifications; EX] | min:10 dB |
| Overload [Specifications; BER=1×10⁻¹⁰] | min:－3 |
| Loss of optical signal [Specifications; Optical signal deassertion/assertion] | typical:－30/－26 |
| Transmitter-section current [Specifications; Vcc=3.3V] | max:110 mA |
| Receiver-section current [Specifications; Vcc=3.3V] | max:100 mA |
| Rate [Rate, Power, Sensitivity, and Transmission Distance; The Only Technical Row on This Page] | 1.25 Gb/s |
| Laser [Rate, Power, Sensitivity, and Transmission Distance; The Only Technical Row on This Page] | FP |
| Wavelength [Rate, power, sensitivity and transmission distance; Only technical row on this page; Single-mode] | 1310 nm |
| Average output optical power [Rate, Power, Sensitivity, and Transmission Distance; The Only Technical Row on This Page] | －10 to -3 |
| Sensitivity [Rate, Power, Sensitivity, and Transmission Distance; The Only Technical Row on This Page] | ≤-24 dBm |
| Transmission Distance [Rate, power, sensitivity and transmission distance; Only technical row on this page; Original cell: 20 kilometers] | 20 kilometers |
| Operating Temperature [Absolute Maximum Ratings] | －20～＋85 |
| Pin soldering temperature [Absolute Maximum Ratings] | <260 ℃ |
| Storage Temperature [Absolute Maximum Ratings] | －40～＋85 |
| Soldering duration [Absolute Maximum Ratings] | <10 seconds |
Applications
Key Features
Datasheet
Please provide your email to download the datasheet.
Invalid email format. Please try again.
Supplier Information
Related Products
-
Tera2060 six-channel 1.25~12.5G electrical bit-error-rate tester
Communications & Energy
Terawan
Data Rate [RF performance table]: 1.25~12.5 Gb/s Output amplitude [RF performance table]: 200~800 mV Output jitter (P-P) [RF performance table; PRBS31]: typical:5 Ps
The Tera2060 simultaneously provides six electrical pattern-generation/error-detection channels at 1.25G/2.5G/5G/6G/8G/10G/12.5G. The first four RF ports share a rate selected from 5G/6G/8G/10G/12.5Gb/s; the second two share a rate from 1.25G/2.5G/5G/6G/8G/10G/12.5G. The two groups can be adjusted independently. It mainly serves 10GE/40G module/AOC development with 6 precision channels over 1.25G~12.5G and tests SFP modules/AOC and HDMI1.4, HDMI2.0, HDMI2.1, or USB3.0 cables.
-
Data-center interconnect equipment-NGOD-8000P1
Communications & Energy
Sont-tech
Equipment Dimensions: 442 mm × 44 mm × 560 mm Input power supply [AC]: 90~260 V Input power supply [DC; Original descending order]: −36~−72 V
The NGOD-8000P1 integrated WDM platform for data-center interconnection supports 48 service inputs and up to 1.2T per fiber. High capacity, low power and latency, and easy maintenance address scarce fiber resources and long-distance, high-capacity requirements, providing a platform for multiservice operation and future expansion.
-
Data-center interconnect equipment-NGOD-8000P2
Communications & Energy
Sont-tech
Equipment Dimensions: 442 mm × 44 mm × 560 mm Input power supply [AC]: 90~260 V Input power supply [DC; Original descending order]: −36~−72 V
The NGOD-8000P2 integrated 100G WDM platform for data-center interconnection supports 12 inputs at 100G per unit, up to 1.2T per fiber, and stacking to 2.4T. High capacity, low power and latency, and easy maintenance address scarce fibers and high-capacity long-distance needs while supporting future expansion.
-
Data-center interconnect equipment-NGOD-8000 series NGOD-8000 II
Communications & Energy
Sont-tech
Equipment Dimensions [2U chassis]: 444 mm × 86 mm × 220 mm Number of service slots: 8 Power Dissipation: <170 W
NGOD-8000 II / NGOD-8000 III / NGOD-8000 V. The NGOD-8000 series offers 2U, 3U, and 5U WDM chassis, conversion cards, and a complete optical-layer range for multiplexing/demultiplexing, amplification, protection, monitoring, and dispersion compensation. It accepts services from 10M~100G, with line-side wavelengths up to 400G, up to 19.2T per fiber, and 800km transmission.
-
Data-center interconnect equipment-NGOD-8000 series NGOD-8000 III
Communications & Energy
Sont-tech
Equipment Dimensions [3U chassis]: 444 mm × 127 mm × 220 mm Number of service slots: 12 Power Dissipation: <250 W
NGOD-8000 II / NGOD-8000 III / NGOD-8000 V. The NGOD-8000 series offers 2U, 3U, and 5U WDM chassis, conversion cards, and a complete optical-layer range for multiplexing/demultiplexing, amplification, protection, monitoring, and dispersion compensation. It accepts services from 10M~100G, with line-side wavelengths up to 400G, up to 19.2T per fiber, and 800km transmission.
Related Articles
The petrochemical industry features continuous high-risk production, where production equipment operates uninterruptedly under extreme working conditions including high temperature, high pressure, strong corrosion and oxidation.
Driven by the continuous pursuit of higher precision and efficiency in optical communication and optoelectronic device manufacturing, OLCR-1000 Low-Coherence Interferometer, independently developed by Wuhan Guanggu Interconnect Technology Co., Ltd., provides an innovative technical solution for distributed return loss testing of optical fibers and optoelectronic devices.
Driven by the rapid upgrading of intelligent vehicles, optoelectronic sensing technologies represented by laser sensing and infrared thermal imaging have become core pillars for high-level autonomous driving and smart cockpit iteration. Leveraging automotive-grade optoelectronic R&D advantages, Pilot Technology Group launches the VITAL intelligent vehicle solution. By integrating high-power VCSEL laser chips and vehicle infrared night-vision thermal imagers, the system comprehensively enhances vehicle environmental perception and realizes safer, smarter and more comfortable driving experiences.
Fiber lasers and fiber amplification systems require excitation sources with stable wavelength, narrow spectral linewidth and consistent output power.
Loading...
Name
Phone
Organization
Use Case
Database Platform